로터리식 제진기의 레이크와 조립부에 대한 형상 설계 및 구조해석
Shape Design and Structural Analysis of the Rake and Assembly Part of Rotary Type Dust Remover
채형구, 강성수
한국기계기술학회지 제27권 제1호 (2025.02) pp.157-162
로터리식 제진기의 레이크 형상 설계에 관한 연구
A Study on the Design of the Rake Shape of a Rotary Screener
서동진, 안재혁 , 강성수
한국기계기술학회지 제25권 제1호 (2023.02) pp.110-119
PSO알고리즘을 이용한 풍력발전기 블레이드의 공력 형상 최적설계
Optimization Design of Aerodynamic Shape of Wind Turbine Blade by PSO Algorithm
리껀, 박명성, 임신택, 김영철, 백태현
한국기계기술학회지 제19권 제5호 (2017.10) pp.626-631
T-flange MR 브레이크의 형상설계 및 이론적 성능평가
Shape Design and Theoretical Performance Evaluation of T-flange MR brake
이도영
한국기계기술학회지 제18권 제1호 (2016.02) pp.5-10
수동식 원터치 싱킹시트용 리클라이너 연동 모듈의 슬롯 형상 설계
Slot-Shape Design of the Recliner Collaboration Module for Manual One-Touch Sinking Seat
신동석, 전의식
한국기계기술학회지 제17권 제3호 (2015.06) pp.525-530
몬테카를로 시뮬레이션을 적용한 불확정 구조계의 형상 최적설계
Shape Optimum Design in Probabilistic Structural system with Monte Carlo Simulation
이병우
한국기계기술학회지 제17권 제2호 (2015.04) pp.239-244
상부금형의 형상에 따른 비대칭 핀치 요크의 최적 설계
Optimal design of the dissymmetry pinch yoke according to the shape of the upper die
민세훈, 서현규
한국기계기술학회지 제16권 제6호 (2014.12) pp.2117-2122
이종재료 접합을 위한 Self-Piercing Rivet의 형상 설계
Shape Design of Self-Piercing Rivet for Joining dissimilar Sheet Metals
김동범, 김관우, 조해용
한국기계기술학회지 제14권 제3호 (2012.06) pp.93-99
복합소재 파이프의 단면형상 최적설계
Optimal design for cross-section shape of composite material pipe
김형철, 강호식, 김진구, 함승덕
한국기계기술학회지 제9권 제1호 (2007.03) pp.23-28
핵연료 노내조사시험설비 노내시험부 압력용기조립체의 형상설계
Shape Design of In-Pool Parts Vessel Assembly for Fuel Test Loop
박국남, 이종민, 심봉식, 지대영, 박수기, 이정영, 김영진
한국기계기술학회지 제6권 제1호 (2004.06) pp.157-165
트러스구조물의 치수, 형상 및 위상 최적설계
Sizing, Shape and Topology Design Optimization of Truss Structures
김기화
한국기계기술학회지 제2권 제2호 (2000.12) pp.141-147
구조해석과 재료의 재배치를 통한 너클의 형상설계
Shape Design of Knuckle Based on Structural Analysis and Relocation of Materials
임오강, 이진식, 손재백
한국기계기술학회지 제2권 제1호 (2000.06) pp.171-176