KOREASCHOLAR

실험계획법에 의한 Al-2024의 고속 정면 밀링가공과 신뢰성 검토 High Speed Face Milling Machining and Reliability Examination of Al-2024 by the Design of Experiment

맹민재
  • 언어KOR
  • URLhttp://db.koreascholar.com/Article/Detail/156739
PDF 원문보기
한국기계기술학회지 (韓國機械技術學會誌)
제12권 제2호 (2010.06)
pp.9-15
한국기계기술학회 (Korean Society of Mechanical Technology)
초록

This paper presents a study of the influence of cutting parameters on surface finish obtained by face milling. Cutting conditions have significantly great effect on surface quality in high-precision machining. Fundamentally, surface roughness are strongly correlated with cutting parameters such as feed rate, cutting speed and depth of cut. Optimal selection of the cutting parameters can obtain better surface roughness. Therefore, optimization of the cutting parameters in a face milling based on the parameter design of the Taguchi method is adopted in this paper to improve surface roughness. And optimal cutting parameters based on the results of the S/N ratio and ANOVA analyses to performance high-precision machining is obtained and verified by confirmation test.

키워드
Face Milling정면밀링High-Precision Machining고정밀가공Taguchi Method다구찌방법Optimal Cutting Parameter최적절삭변수. S/N Ratio신호대잡음비ANOVA분산분석
목차
Abstract
 1. 서론
 2. 로보스트 설계
 3. 밀링가공실험
  3.1 실험장치 및 실험방법
 4. 실험결과
  4.1 분산분석(ANOVA)
  4.2 확인실험
 5. 결론
 후기
 참고문헌
저자
  • 맹민재(동서울대학 항공자동차기계공학부) | M. J. MAENG