KOREASCHOLAR

분리된 2개의 기체 주입 관을 갖는 기체 주입 미립화기의 미립화 특성 Characteristics of Atomization in the Effervescent Atomizer with Separated Two-aerator Tubes

김형곤, 김진구, 송규근
  • 언어KOR
  • URLhttp://db.koreascholar.com/Article/Detail/311673
한국기계기술학회지 (韓國機械技術學會誌)
제18권 제1호 (2016.02)
pp.30-35
한국기계기술학회 (Korean Society of Mechanical Technology)
초록

An experimental study was conducted to investigate the atomization characteristics of spray from the effervescent atomizer, which has separated two aerator tubes. The atomization characteristics were examined through the influence of ALR and the changes of atomizer geometry such as nozzle orifice diameter, diffusion angle, mixing chamber volume. PDPA(Phase Doppler Particle Analyzer) was used to evaluate the atomization characteristics. During the experiments, the mass flow rate of liquid was kept constant at 2.8g/s and the mass flow rate of atomizing air was changed from 0.2 to 0.6g/s. Experimental results showed that SMD was not a linear function of ALR. While SMD is very sensitive to the changes of ALR, the changes of atomizer geometry had little effect on droplet mean diameter. As the effervescent atomizer with separated two aerator tubes is insensitive to the changes of atomizer geometry, it is expected that the effervescent atomizer with separated two aerator tubes is capable of requirements of many applications, without the drawbacks of atomization characteristics.

저자
  • 김형곤(CAMSTech CO.,LTD.) | Hyung Gon KIM
  • 김진구(Jeonbuk Technopark) | Jin Goo Kim
  • 송규근(Member, Automobile high technology center, Chonbuk national university) | Kyu Keun Song Corresponding Author