KOREASCHOLAR

Composite materials have the strong durability and light weight as inhomogeneous material. These material are manufactured by combining and maximizing the advantage of each material. Among these various materials,
stainless steel, aluminum and brass has been used generally. Prior to using, the preparatory experiments are demanded in order to obtain the material strengths. In this study, the tensile tests are carried out with the specimens of stainless steel, aluminum and brass. These tensile specimens of same standards are made with the
notches at both sides of specimen. When the forced displacement of about 11 mm proceeds in case of stainless steel specimen, the maximum load of 31000 N is shown simultaneously with the fracture of specimen. When the forced displacement of about 6 mm proceeds in case of aluminum specimen, the maximum load of 20600 N is shown simultaneously with the fracture of specimen. When the forced displacement of about 7 mm proceeds in case of brass specimen, the maximum load of 25000 N is shown. In this study, the finite element analysis as ANSYS program is carried out in order to verify these experimental results. The experimental and analysis results are similarly shown each other. Through the result of this study, the analysis data with no experiments are thought to be trustworthy as the tensile experimental data.

• 이정호(Mechanical Engineering Dept. Graduate School, Kongju National University) | Jung-Ho Lee
• 조재웅(Professor, Division of Mechanical & Automotive Engineering, Kongju National University) | Jae-Ung Cho Corresponding Author