KOREASCHOLAR

슬라이딩 케이지 형상에 따른 상용 A-IMS 모듈의 응력분포 특성 The Effect of Sliding Cage Geometry on the A-IMS Module for Commercial Vehicle

민세훈, 서현규
  • 언어KOR
  • URLhttp://db.koreascholar.com/Article/Detail/330138
PDF 원문보기
한국기계기술학회지 (韓國機械技術學會誌)
제19권 제1호 (2017.02)
pp.141-147
한국기계기술학회 (Korean Society of Mechanical Technology)
초록

The object of this study was to investigate for improving of the homogeneous stress distribution according to sliding cage geometry. In order to achieve this, the sliding cage were modelled as type A, type B and type C, then the sliding cage were applied at A-IMS assembly. The numerical simulation was performed by SOLIDWORKS SIMULATION commercial code and the torque range was applied from 10N·m to 40N·m at A-IMS assembly. The results of simulation were compared in terms of Von-mises stress, principal stress and displacement characteristics. Each stress of type B were the highest value. In other hand, Von-mises stress of type A and type C were less than yield stress.

키워드
Adjustable sliding intermediate shaft(A-IMS 모듈)Asymmetry pinch yoke(비대칭 핀치 요크)Solid shaft(솔리드 샤프트)Tubular shaft(튜블러 샤프트)Sliding cage(슬라이딩 케이지)
저자
  • 민세훈(Graduate school of Mechanical Engineering, Kongju National University) | Se-Hun Min
  • 서현규(Division of Mechanical & Automotive Engineering, Kongju National University) | Hyun-Kyu Suh Corresponding Author