KOREASCHOLAR

In this study, we used the 3D simulation program to create bodice patterns for adolescents boy students and analyze the fitting and air gap through 3D simulation. The purpose of this study was to select the bodice pattern method that best suited the body shapes of the adolescents male students. The subjects of this study were the French E pattern, Japanese N pattern, and Korean industrial L and J patterns. The applied size was the sixth Korean human body size survey data of 2010 Korea. The age range of the subjects was 13-18 years. DC Suite Program Ver. 5.1 was used, and SPSS 23.0 program was used for data analysis. As a result of comparing the shapes of the bodice patterns in the 3D simulation program, the E pattern had two waist darts on the front and one shoulder dart and one waist dart on the back, and the J and L patterns only had one dart on the back. The N pattern had no darts on either the front or back. As a result of examining the appearance evaluation of the pattern, air gap, color distribution, and clothing cross-section, the E pattern was evaluated as the closest to the body, and the N pattern was evaluated as the pattern with the largest allowance. The J pattern was evaluated as the best fit for body shape of the male adolescents. However, it is necessary to develop a pattern system by adding extra ease in setting the center front length.

Abstract
 I. Introduction
 Ⅱ. Background
  1. Definition of adolescent and body characteristics
  2. Study of bodice prototype
  3. 3D simulation program
 Ⅲ. Methods
  1. Study of subject
  2. Application size
  3. Study method and program
  4. Virtual model
  5. Physical properties
  6. Data analysis
 Ⅳ. Result and Discussion
  1. Comparison of pattern shape and size
  2. Evaluation of 3D simulation
 Ⅴ. Conclusion
 References

• Su-Joung Cha(Dept. of Fashion & Clothing, Seowon University) | 차수정 Corresponding author