KOREASCHOLAR

플랜지 케이스의 입구온도 경계조건에 따른 케이스 내부의 열적거동에 관한 연구 A Study on the Thermal Behavior at the Case Inner According to Inlet Port Temperature Boundary Conditions of a Flange Case

고동국, 명순식, 강병용, 김민수
  • 언어KOR
  • URLhttp://db.koreascholar.com/Article/Detail/385632
PDF 원문보기
한국기계기술학회지 (韓國機械技術學會誌)
제21권 제5호 (2019.10)
pp.909-915
한국기계기술학회 (Korean Society of Mechanical Technology)
초록

In this study, the thermal behavior characteristics of flange case interior were analyzed by the numerical method. The boundary conditions at the inlet port of flange case were the heat flux and heat flux time. As the heat flux time at inlet of case increased, the temperature values gradually increased, and the degree of increase was very small. If the heat flux of the melted iron increases to 2,000,000 W/m2, the temperature change at the case interior will occur largely, causing heat deformation. As a result, in order to reduce thermal defects at the case interior, the heat flux and heat flux time of the melted iron should be set within 500,000 W/m2 and 5 seconds, respectively.

키워드
Boundary condition경계조건Computational fluid dynamics전산유체역학Flange case플랜지 케이스Heat flux열유속Thermal behavior열적거동
목차
ABSTRACT
1. 서 론
2. 수치해석
    2.1 플랜지 케이스의 형상 및 해석모델
    2.2 지배방정식 및 해석기법
    2.3 격자의존성 평가(Grid dependency test)
3. 결과 및 고찰
    3.1 열유속 변화에 따른 열적 거동특성
    3.2 열유속 시간변화에 따른 열적 거동특성
4. 결 론
References
저자
  • 고동국(Department of Mechanical Engineering, Chonbuk National University) | Dong-Guk Ko
  • 명순식(Deputy General Manager, Mirae VC R&D Center) | Soon-Sik Myung
  • 강병용(Mirae VC R&D Center) | Byeong-Yong Kang
  • 김민수(Division of Mechanical Design Engineering, Chonbuk National University) | Min-Soo Kim Corresponding Author