KOREASCHOLAR

In this study, carbon fiber Z-pins were fabricated by applying the different manufacturing process, and pull out test was performed for the dumbbell type of test specimens. Carbon fiber Z pins with smooth surface(type I) and stepped surface(type II, type III) were fabricated by using autoclave. Carbon fiber Z-pins with stepped surface were manufacturing method, that is, mold forming and machining process. The experimantal results show that carbon fiber Z pins have superior pull-out characteristics to carbon steel Z-pins. Pull-out load and pull-out toughness of carbon fiber Z pins with stepped surface are larger than those of carbon fiber Z-pins with smooth surface. Pull-out load and pull out toughness of mold f ormed Z-pin are 31% and 218% larger than those of smooth surfaced Z-pins, respectively.

ABSTRACT
1. 서 론
2. 실 험
    2.1 Z-핀
    2.2 인발시험편
    2.3 인발시험
3. 결과 및 토론
4. 결 론
References

• 심충기(Dept. of Energy System Engineering, Graduate School of Energy and Environment, Seoul National University of Science and Technology) | Chung-ki Sim
• 정성균(Dept. of Mechanical and Automotive Engineering, Seoul National University of Science and Technolog) | Seong-Kyun Cheong Corresponding Author