KOREASCHOLAR

실험계획법을 이용한 3D프린터 가공조건 최적화에 관한 연구 A Study on the Optimization of 3D Printer Processing Conditions using Experiment Design

이정원, 정현석, 이춘규
  • 언어KOR
  • URLhttp://db.koreascholar.com/Article/Detail/396044
PDF 원문보기
한국기계기술학회지 (韓國機械技術學會誌)
제22권 제3호 (2020.06)
pp.585-589
한국기계기술학회 (Korean Society of Mechanical Technology)
초록

The purpose of this study was to establish the optimum experimental conditions by investigating the relationship between the nine experimental conditions using Taguchi technique. Through experiments, we found that the weight, thickness, and length of the sample were most affected by the angle at which the sample was installed, while the width had the largest influence on the sample's x-axis and the inner diameter. It was confirmed. Therefore, through this experiment, it was confirmed that the installation angle of the product had the greatest influence on the error occurrence of the product during 3D printer processing.

키워드
3D Printer3D 프린터Hypothesis검정Master specimen시편
목차
ABSTRACT
1. 서 론
2. 실험 장치 및 방법
    2.1 실험 장치 및 제품도
    2.2 실험조건
3. 결과 및 고찰
4. 결 론
References
저자
  • 이정원(Department of Metal Mold Design Engineering, Kongju National University) | Jung-Won Lee
  • 정현석(Department Semiconductor quality measurement of Korea Polytechnic colleges) | Hyun-Suk Jung
  • 이춘규(Department of Metal Mold Design Engineering, Kongju National University) | Chun-Kyu Lee Corresponding Author