기계식 제진기의 다단계 신축 래크 구조에 관한 설계 및 해석 Design and Analysis of Multi-Stage Expansion Rack Structure of Mechanical Dust Remover
pp.925-931
Domestic dust remover began to be manufactured and installed in the late 1980s by introducing Japanese products and technologies. Currently, the design standards of dust remover are applied to Japan's design standards and partly sub-unit technology was developed for the domestic environment, but no technology was not developed. In addition, most of the manufacturers are small or small, so many of them have been installed and operated for 25 years because they develop small technologies such as parts deformation and functional addition rather than core technology development. Mechanical dust remover require about 70% of manufacturing costs compared to conventional hydraulic dust remover, which can reduce initial production costs, reduce maintenance costs due to low failure rates, and can be operated reliably. Existing hydraulic dust remover had a problem of contaminating rivers due to leakage of hydraulic oil, but mechanical dust remover have no factors that cause water pollution. Therefore, this study developed a rack-type operating structure for optimal and new construction by developing a multi-stage rack structure of mechanical decontamination components, which are substitutes of conventional rotary and hydraulic dust remover.