KOREASCHOLAR

발전용 가스터빈 Rotor 정지조건별 최적 Turning 운전시간 고찰: 501기종 현장실험 중심으로 A Study on Optimal Turning Operation Time for Rotor Stop Condition in Gas Turbine: Based on Field Test of W501 Machines

유원주, 이창열
  • 언어KOR
  • URLhttp://db.koreascholar.com/Article/Detail/426410
대한안전경영과학회지
제25권 제3호 (2023.09)
pp.1-8
대한안전경영과학회 (Korea Safety Management & Science)
초록

As the capacity of renewable power generation facilities rapidly increases, the variability of electric power system and gas turbine power generation is also increasing. Therefore, problems may occur that require urgent repair while the gas turbine rotor is stopped. When the gas turbine rotor turning is stopped and then restarted, if the turning period is not appropriate, severe vibration may occur due to rotor bending. As a result of the experiment, it was confirmed that normal operation is possible when the gap data measured at the start of rotor turning after maintenance work is similar to the existing value. And the vibration value at the start of rotor turning was lower as the rotor temperature was lower or the stop period was shorter.

키워드
Gas TurbineRotor BendingBearing VibrationTurning OperationDisc Cavity Temperature
목차
1. 서 론
2. 실험대상 및 방법
3. 결과 및 고찰
    3.1 단시간 Rotor Turning 정지 영향
    3.2 장기간 Rotor Turning 정지 영향
4. 결 론
저자
  • 이창열(한국동서발전(주)) | Chang-Yeol Lee (Korea East-West Power Co., Ltd.)
  • 유원주(한국동서발전(주)) | Won-Ju Yu (Korea East-West Power Co., Ltd.) Corresponding Author