KOREASCHOLAR

개정 KS 규격에 부합하는 레인지 후드 개발 Development of a Range Hood that Meets the Revised KS Standard

최우석, 이원섭
  • 언어KOR
  • URLhttp://db.koreascholar.com/Article/Detail/427139
PDF 원문보기
한국기계기술학회지 (韓國機械技術學會誌)
제25권 제5호 (2023.10)
pp.886-890
한국기계기술학회 (Korean Society of Mechanical Technology)
초록

As the importance of the indoor environment increases. In response to that, performance test study was conducted for the development of high performance range hood. And the chamber casing mock-up was subjected to a performance test by applying a static pressure of 100[Pa] in accordance with KS C 9304: 2020, When the discharge port diameter was 100 mm, the standard flow rate() was 186.9 at 60.8W, the discharge port diameter was 125 mm, and the standard flow rate() at 52.0W was 184.6, which satisfies “B-type 160 to 200 (static pressure 100Pa)”. This is a result that meets the KS C 9304 : 2020.

키워드
Range hood(레인지 후드)Chamber casing(챔버 형상)Static pressure(정압)Mock-up(목업)Flow rate(풍량)Power consumption(소비전력)
저자
  • 최우석(강릉원주대학교 기계의용공학과) | woo suck choi (Member, Graduated Ph. D. in department of Mechanical & Biomedical Engineering, Gangneung-Wonju National University) Corresponding author
  • 이원섭(강릉원주대학교) | Won-Seub Lee (Member, Professor, School of Mechanical and Automotive Engineering, Gangneung-Wonju National University)