KOREASCHOLAR

The purpose of this study is to provide basic data for the production of jackets with high fit by comparing and analyzing the adhesive and non-adhesive production methods of men's jackets. An analysis of the manufacturing method showcased differences between the adhesive and non-adhesive manufacturing methods in the cutting and wick attachment method, the shape and attachment method of the chest reinforcing wick, the sleeve attachment method, and the shoulder pad and sleeve reinforcing cloth attachment method. In evaluating the outfit, the overall fit of the shoulder, the fit of the chest, and the fit of the armpit were found to be high in the non-adhesive production method. In evaluating appearance evaluation, the front shoulder, chest, and sleeve overall appearance showed a high non-adhesive production method. Therefore, in order to increase the wearability of the shoulder pad and the the attachment method of the upper sleeve reinforcing cloth, the non-adhesive production method should be used, and in order to increase the overall wearability and armpit wear of the chest, the difference in the attachment method, and the reinforcement method of the armhole should be used. In addition, to increase the appearance of the jacket, non-adhesive production methods such as differences in wick attachment methods, shoulder pads, sleeve reinforcing cloth, and sleeve attachment methods should be used.

I.􀀃 Introduction
II.􀀃 Background
    1.􀀎 Adhesive􀀎 fabrication􀀎 method􀀎 (Ready-to-wear􀀎manufacturing􀀎 method)
    2.􀀎Non-adhesive􀀎fabrication􀀎method􀀎(Customized􀀎clothing􀀎 manufacturing􀀎 method)
III.􀀃 Method
    1.􀀎 Selection􀀎 of􀀎 subjects
    2.􀀎 Jacket􀀎 design􀀎 selection􀀎 and􀀎 jacket􀀎 pattern􀀎design
    3.􀀎 Fabrication􀀎 of􀀎 experimental􀀎 clothing
    4.􀀎 Wearability􀀎 and􀀎 appearance􀀎 evaluation
    5.􀀎 Data􀀎 analysis
Ⅳ.􀀃 Results􀀃 and􀀃 Discussion
    1.􀀎 Jacket􀀎 pattern􀀎 design􀀎 and􀀎 fabrication􀀎 of􀀎experimental􀀎 clothing
    2.􀀎 Wearability􀀎 and􀀎 appearance􀀎 evaluation􀀎 result
V.􀀃 Conclusion

• 권동국(건국대학교 일반대학원 박사) | Dong Kuk Kwon (Ph. D., Graduate School of Konkuk University, Korea) Corresponding author