각형 교정용 와이어 단면 크기에 따른다결정 세라믹 자가 결찰 브라켓 토크 강도에 관한 연구 A study on the Strength of Poly-Crystalline Ceramic Self-Ligating Braket According to the Cross Sectional Size of Square Orthodontic Wires
pp.267-273
The demand for ceramic brackets, which have a high aesthetic purpose due to their high light transmission is increasing due to the application of poly-crystalline alumina material. Brackets using this material require stable properties that should not fracture during the treatment period. In this paper, the fracture strength of a ceramic bracket made of the same material used in clinical practice was checked by applying torque with a square stainless steel wire. The wire used in the test was prepared with cross-section sizes of 017 inch ✕ 025 inch, 018 inch ✕ 025 inch, and 019 inch ✕ 025 inch. There were a total of 150 bracket specimens and after ligating wires in the slots, torque was applied to each of 75 specimens in the gingival and occlusal directions. The torque test used digital torque meter equipment and the torque value at which the bracket slot fractured due to plastic deformation of the ligated wire was confirmed. Based on the resulting data we plan to use the data to recommend stable torque use and develop future bracket design.