논문 상세보기

하동군 옥종 지역에서 산출되는 황토의 구리 흡착 특성 KCI 등재

The Copper Adsorption onto 'Hwangto′ in the Okjong Area, Hadong

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/247633
서비스가 종료되어 열람이 제한될 수 있습니다.
광물과 암석 (Korean Journal of Mineralogy and Petrology)
한국광물학회 (The Mineralogical Society Off Korea)
초록

경남 하동군 옥종 일대에서 회장암의 풍화산물로 산출되는 황토에 대하여 깊이에 따른 광물 조성의 변화와 구리 흡착 특성에 대하여 연구하였다. 지표로부터 10 cm, 25 cm, 2∼3 m 및 3 m 이하에서 채취한 시료를 정량 XRD 분석한 결과 대부분의 시료는 카올리나이트와 할로이사이트로 구성되어 있었다. 상부에서 채취한 시료에는 침철석이나 깁사이트 같은 수산화 철­알루미늄 광물이 포함되어 있는데 반하여 하부에서 채취한 시료에는 이 광물들이 거의 포함되어 있지 않았다. 석영의 함량은 심도가 얕을수록 그 양이 많아지고, 카올리나이트의 함량은 반대되는 경향을 가진다. 구리용액의 흡착 실험 결과, pH 4부터 제거량이 급증하기 시작하여 pH 6에 도달하면 90%에 도달하며, pH 7 이상일 될 경우 99% 이상 제거됨을 알 수 있다. 광물 조성의 차이가 흡착­제거 특성에 어느 정도 영향을 미치는 것으로 판단된다. 구리 이온의 농도가 높은 경우, 흡착 실험 결과와 MINTEQA2 프로그램에 의한 계산값은 잘 일치하였다. 그러나 구리 이온의 농도가 묽어질수록 일치하는 정도는 감소하였다. 이번 연구의 결과 침전은 구리 이온의 제거에 매우 결정적인 역할을 하는 것으로 밝혀졌으며, 구리 이온의 농도가 진한 경우 그 양상은 특히 더 심하였다. 구리 이온의 농도가 묽은 경우 실험값과 계산값 사이의 불일치는 변수값들의 선택, 충분하지 못한 반응 시간, 반응 자리에 대한 철저하지 못한 고려 등 여러 가지 원인이 있을 것으로 판단된다.

We researched the variation of mineral composition with depth and the Cu adsorption behavior of Hwangto in the Okjong area, Hadong. The 4 Hwangto samples were collected from depth 10 cm, 25 cm, 2∼3 m and under 3 m from surface, and analyzed using the X­ray Diffractometer. The Hwangto samples were mostly composed of clay minerals such as kaolinite and halloysite. Two samples from 10 cm and 25 cm contained Fe or Al hydroxide minerals, for example goethite or gibbsite. As depth increases, the content of quartz decreases but that of kaolinite increases. The amount of Cu removal was rapidly rised from pH 4, and reached about 90% at pH 6 and above 90% at pH 7. It is regarded that the trend of Cu removal was affected by the difference in mineral composition. It was relatively well matched between experimental value and calculated value by MINTEQA2 program in the case of high Cu concentration. From this study the precipitation has important role for the removal of Cu ions, particularly in the case of high Cu concentration. However, it was discord between experimental value and calculated one in the dilute concentration circumstances. The reason may be the mistake in parameters, insufficient reaction time, and inadequate consideration of reaction site in mineral surface.

저자
  • 조현구
  • 양도열
  • 김영호