The purpose of this study is to attempt a Analysis of a pointed-end Equipment Arm Safety-Accident for Fault Tree Analysis. Three major techniques were used first problem is Z-Model by which accident Analysis & prevention of a pointed-end Industry can be made, Fault Tree Analysis(FTA) bywhich quantification of a pointed-end Equipment accident Analysis can be made it 5 years in past and the third, manual-written by which minimal cut set to accident can be Identified. A example has been made of issue point a pointed-end Equipment that the Arm in loader happen to Injuries. According to the Analysis lack of safety knowledge, unsafety-behavior seem to be the primal cause of accident. Comparision of the accident cause to actual report demonstratesthat the FTA a efficient tool for Industrial Accident prevention.

Abstract
 I. 서론
  1.1 연구의 필요성과 목적
  1.2 연구의 범위 및 방법 분석
 II. 재해사고의 분석
  2.1 불안전한행동의 재해요인
  2.2 사고 연쇄반응의 분석 (Fault Tree Analysis)
 III. 효율성 평가 : 사례연구
  3.1 FTA 제반사항
  3.2 Z-Model-List 작성
  3.3 FTA의 적용 및 분석
  3.4 사고원인에 대한 분석과 타 기계분야와의 원인 분석
 IV. 결론
 참고문헌

• 윤용구
• 박범