The purpose of this study is to provide basic data to assist students and industrial designers in fashion by examining the trend of designing women’s wear with the SCAMPER method. In the research, the seven types of SCAMPER methods for fashion design were classified based on the previous studies. From 2010 S/S to 2020 S/S, data from 5,149 photographs were collected through overlapping checks and classified by SCAMPER method type. Data analysis was performed using SPSS 25.0 for frequency analysis. As a result, in the SCAMPER “combine” method, more than two items were combined, or structural details were combined with items. In the most applied “adapt” method was involved imitating similar images, or natural forms, or other objects. The “modify” method was applied by changing the shape of some details in basic fashion items. The “magnify” method was applied by enlarging, elongating, or elevating some details of fashion items. The “minify” method was applied by minimizing, shortening, or lowering some details of basic fashion. The method of “put to other use” was expressed throughout the clothing by using non-fabric or trimmings such as metal, beads, and strings. The “rearrange” method was applied by repositioning the top and bottom, front and back, or outside and inside in fashion items and in details. The “reverse” method was applied by reversing the style of fashion, mix-and-match fabric, or switching the gender of the fashion items.

Abstract
I. Introduction
II. Background
    1. Checklist method
    2. SCAMPER method
III. Methods
    1. Research methods
    2. Data collection and analysis
IV. Results and Discussion
    1. Trend analysis of SCAMPER method applied tofashion design
    2. Cases analysis of SCAMPER method applied tofashion design by types
V. Conclusion
References

• Kyung-Lim Lee(Dept. of Fashion Design & Merchandising, Kyungsung University) | 이경림 Corresponding author