논문 상세보기
pp.980-985
초산발효조건에 따른 사과주스의 발효특성을 알아보기 위하여 flask scale에서 초기 알코올 농도, 당농도, 초산농도 및 종초접종량 조건에 따른 초산발효를 실시하였다. 초기 알코올농도 3, 5, 7, 9%를 달리하여 사과주스의 초산발효를 12일간 실시한 결과 알코올 함량 5% 일때 발효 10일 째 산도가 최대치 5.88%로 측정되었으며, 알코올 함량이 9%일 경우 초산발효가 정상적으로 진행되지 않았다. 초기 당 농도 1, 5, 10, 14 로
This study was conducted to determine the acetic-acid fermentation properties of apple juice (initial alcohol content, apple juice concentration, acetic-acid content, and inoculum size) in flask scale. At the acetic-acid fermentation of apple juice with 3, 5, 7, and 9% initial alcohol content, the maximum acidity after 10-day fermentation was 5.88% when the initial alcohol content was 5%. The acetic-acid fermentation did not proceed normally when the initial alcohol content was 9%. When the initial Brix was , the acidity gradually increased, and the acidity after 12-day acetic-acid fermentation was 4.48%. Above 4% acidity was attained faster when the apple juice concentration was 5 and 10 than when it was 1 and 14 . When the initial acidity was 1% or above (0.3, 0.5, 1.0, and 2.0%), the acetic-acid fermentation proceeded normally. The acetic-acid fermentation also proceeded normally when the inoculum sizes were 10 and 15%, and the acidity after eight-day acetic-acid fermentation was 5.60 and 6.05%, respectively. Therefore, the following were considered the optimal acetic-acid fermentation conditions for apple cider vinegar: 5% initial alcohol content, 5 or above apple juice concentration, 1.0% or above initial acidity, and 10% or above inoculum size. Apple cider vinegar with above 5% acidity can be produced within 48 h under the following acetic-acid fermentation conditions: 7% initial alcohol content, about 1% initial acidity, and 10% inoculum volume at , 30 rpm, and 1.0 vvm, using 14 apple juice in a mini-jar fermentor as a pre-step for industrial-scale adaptation.
