The type of radioactive waste that may occur in the process of NPP dismantling can be classified into solid, liquid, gas, and mixed waste. Most of the radioactive waste generated during the dismantling of a NPP is metal solid waste, but liquid radioactive waste is also a very important factor in terms of radiation environmental impact assessment. In the case of liquid radioactive waste, it is necessary to calculate the generation amount in order to design liquid radioactive waste processing system of Radioactive Waste Treatment Facility (RWTF). Depending on the amount of liquid radioactive waste generated, the type of liquid radioactive waste processing system included in the RWTF is different. In addition, in order to apply to the domestic RWTF, it is important to secure the site area occupied by the each system, the liquid radioactive waste treatment capacity of the system, and how to secure circulating water used for dilution and discharge of liquid radioactive waste. Therefore, this review aims to suggest an optimal method for the treatment system for liquid radioactive waste included in RWTF of Wolseong.

• HyunMin Kim(Korea Hydro and Nuclear Power (KHNP) Central Research Institute (KHNP-CRI)) Corresponding author
• JunKi Baik(Korea Hydro and Nuclear Power (KHNP) Central Research Institute (KHNP-CRI))
• SukWon Jung(Korea Hydro and Nuclear Power (KHNP) Central Research Institute (KHNP-CRI))
• GangWoo Ryu(Korea Hydro and Nuclear Power (KHNP) Central Research Institute (KHNP-CRI))