논문 상세보기

금 증착 적외선 반사판의 반사율 및 수명에 미치는 제조공정 변수의 영향 KCI 등재 SCOPUS

Influence of Manufacturing Conditions on the Reflectance and Life Time of the Gold Protected IR Mirror

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/346238
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
한국재료학회지 (Korean Journal of Materials Research)
한국재료학회 (Materials Research Society Of Korea)
초록

Infrared(IR) heating has many advantages, such as energy efficiency, reduced heating time, cleanliness, equipment compactness, high drying rate and easy automation. These features of IR heating provide widely industrial applications, such as surface heat treatment in semiconductor fabrication, thermoforming of polymers, drying and disinfection of food products, heating to metal forging, and drying of wet materials. In this study, the characteristics of a protected gold mirror were examined by spectrophotometer and the lifetime of the coating layers were evaluated by a cross-cutting method and salt spray test. The effects of manufacturing conditions on the protected gold mirror were seen and remedies for these effects were noted in order to improve the properties of the protected gold mirror in the drying process. The reflectance and lifetime of the protected gold mirror was influenced by manufacturing conditions, such as surface roughness and forming conditions of the anti-oxide layer, the adhesion layer, the reflecting layer and the protection layer. The results of this study showed that the protected gold mirror manufactured using a buffing method for pre-treatment resulted in the most effective reflectance. In addition, Al2O3 coating on an Al substrate as an anti-oxide layer was more effective than the anodizing process in the test of reflectance. Furthermore, the protected gold mirror manufactured by layers forming of various materials resulted in the most effective reflectance and lifetime when coated with Al2O3 as the anti-oxide layer, coated Cr as the adhesion layer, and coated MgF2 as the protection layer.

목차
Abstract
 1. 서 론
 2. 실험 방법
  2.1 실험재료
  2.2 실험방법
 3. 결과 및 고찰
  3.1 적외선 박사막 제조방법의 이론적 배경
  3.2 반사판의 수명
  3.3 반사판의 적외선 반사율
 4. 결 론
 References
저자
  • 최용선(위덕대학교 일반대학원 정보전자공학과) | Yong-Sun Choi (Dept. of Information & Electronics Engineering, Uiduk University)
  • 이영기(위덕대학교 그린에너지공학부) | Young-Ki Lee (Division of Green Energy Engineering, Uiduk University)
  • 이유기(위덕대학교 그린에너지공학부) | You-Kee Lee (Division of Green Energy Engineering, Uiduk University) Corresponding author