관수장치는 이상기후로 인한 농업의 용수절감 대책에서 매우 중요한 역할을 하고 있다. 그러나 우리나 라의 관수장치의 개발 역사나 기술은 관수 선진국에 비해 70~80% 수준으로 추정된다. 관수장치의 성능 개선은 수출 확대뿐만 아니라 수입대체 효과에서도 매우 시급한 실정이다. 관수장치의 기술 개발은 경험적 방법과 이론해석에 따른 설계의 개선으로 상당 부분 가능하다. 그러나 경질 미로를 구성한 경우에는 비교적 실험과 이론적 해석이 잘 나타나지만 연질의 실리콘이 동시에 결합된 경우에는 실험적인 방법이외의 해석은 매우 어렵다. 본 연구에서는 국내 PC 드리퍼 성능을 선진국 수준으로 개선하고자 수행하였다. 주요 내용은 실리콘의 경도의 문제점과 개선, 경질 미로의 성형물 재설계, 이를 통한 새로운 PC 드리퍼를 설계 제작하였고, 동시에 성능 평가를 실시하였다. 또한 국내외에서 가장 우수한 것으로 알려진 Euro PC 드리퍼와 성능 비교를 수행하였으며, 동시에 핵심 부품의 교차 조립에 의한 유량의 균등성을 평가함으 로서 국내 PC 드리퍼의 근원적 기술의 문제점을 파악하고 개선할 수 있었다.
Irrigation system plays an important role in saving agricultural water due to abnormal climate. However, the level of technology and history of the Korean irrigation system is estimated to 70~80% compared with the developed countries of the system. The performance enhancement of the irrigation system is needed for the export increase and import substitution. Although the experimental and theoretical analyses can be easily applied to the irrigation system with hardened maze, it is difficult to analyze theoretically for the system containing soft silicon material. In this study, the research for enhancing the PC dripper performance of domestic company a had been conducted. The main research contents were the silicon hardness problem and its improvement and the re-design of the hardened maze. Through this research, a new PC dripper had been designed and fabricated, and the performance of that was assessed. The experiments of Euro PC dripper, which is known as a PC dripper with excellent performance, was conducted, and the technical problems of the domestic PC drippers could be analyzed by assessing the flow uniformity for cross-assembled samples.