논문 상세보기

발전소 온배수용 판형열교환기의 개발 KCI 등재

Development of Plate Heat Exchangers for Heated Effluent from Power Plant

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/367975
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
한국기계기술학회지 (Journal of the Korean Society of Mechanical Technology)
한국기계기술학회 (Korean Society of Mechanical Technology)
초록

In this study, a plate heat exchanger was developed for applying to a heat pump system using the heated effluent from a thermal power plant. Since seawater is used as a heat source and a heat sink in this heat pump system, Titanium was chosen as the heat plate material for its high corrosion resistance. One of the purposes of the study was to get an optimized distribution area in the heat plate in order that better thermal performances could be achieved through equal flow rates along the heat transfer area. It was revealed from the performance tests that the mean heat transfer rate and the overall heat transfer coefficient were enhanced by 2.9% and 7.7%, respectively, compared to those measured before the design optimization.

목차
ABSTRACT
 1. 서 론
 2. 판형열교환기의 설계 및 구조 해석
  2.1 판형열교환기 설계
  2.2 판형열교환기의 구조안전성 검증
 3. 실험 장치 및 방법
 4. 실험 결과 및 해석
  4.1 균일한 골 깊이의 판형열교환기
  4.2 최적 설계된 판형열교환기
 5. 결 론
 후 기
 References
저자
  • 김대영(DHP Engineering Co., Ltd.) | D.Y. Kim
  • 김대영(Department of Mechanical Engineering, Graduate School, Jeju National University) | D.Y. Kim
  • 강경문(Department of Mechanical Engineering, Graduate School, Jeju National University) | G.M. Kang
  • 임연주(Department of Environmental Sciences, Graduate School, Busan National University) | Y.J. Lim
  • 허재혁(New and Renewable Energy Institure, Korea Institute of Energy Research) | J.H. Heo
  • 이연건(Department of Nuclear and Energy Engineering, Jeju National University) | Y.G. Lee
  • 현명택(Department of Mechanical Engineering, Jeju National University) | M.T. Hyun Corresponding Author