논문 상세보기

차전자피 함량에 따른 쌀 압출성형물의 물리적 특성 KCI 등재

Effects of Psyllium Husk Content on the Physical Properties of Extruded Rice Flour

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/384696
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
산업식품공학 (Food Engineering Progress)
한국산업식품공학회 (Korean Society for Food Engineering)
초록

본 연구는 기능성 팽화 스낵의 개발을 위하여 우수한 식이섬유소원인 차전자피를 첨가한 쌀 압출성형물의 물리적 특성에 대하여 살펴보았다. 원료 배합비는 쌀을 기본 원료로 하여 차전자피의 함량(0, 7, 14, 21%)을 달리하였고, 압출성형 공정변수는 스크루 회전속도 200 rpm, 사출구 온도 140oC, 수분함량 20%로 조절하였다. 압출성형 후 직경 팽화율, 비길이, 밀도, 겉보기 탄성계수, 파괴력, 조직감, 색도, 수분용해지수, 수분흡착지수, 미세구조를 측정하였다. 직경 팽화율은 차전자피 함량이 증가할수록 감소하였으며, 비길이, 밀도, 겉보기 탄성계수와 파괴력은 증가하는 경향을 보였다. 부착성은 차전자피 함량이 증가할수록 증가하였으며 21% 첨가에서 급격히 증가하였다. 차전자피의 첨가량이 증가할수록 명도는 감소하였고 적색도, 황색도, 총 색도차는 증가하는 경향을 보였다. 수분용해지수와 수분흡착지수는 압출성형 공정 후 모두 증가하였으며 차전자피의 함량이 증가할수록 증가하였다. 미세구조는 차전자피 첨가량이 증가할수록 팽화와 기공의 크기가 감소하여 압출성형물의 밀도가 증가하였다. 결론적으로 차전자피의 첨가량이 증가할수록 팽화를 감소시켜 단단한 조직감을 나타내었고 높은 수분흡수력으로 인해 부착성이 증가하여 14% 이하로 첨가 하는 것이 바람직하다. 또한 차전자피의 함량이 높은 팽화 스낵을 개발하기 위하여 유화제의 첨가 뿐만 아니라 차전 자피의 전처리 등 추가적인 연구가 필요할 것이다.

This study was performed to determine the effect of psyllium husk addition on the physical properties of rice extrudates. Rice-based formulations mixed with psyllium husk (0, 7, 14 and 21%) were extruded at a die temperature of 140oC, screw speed of 200 rpm, and moisture content of 20%. As the content of psyllium husk increased, expansion ratio decreased, while piece density and specific length increased. Apparent elastic modulus, breaking strength, adhesiveness, and hardness augmented with an elevation in psyllium husk content. Lightness declined as psyllium husk content furthered, while redness, yellowness, and color difference intensified. Water soluble index and water absorption index increased with an increased amount of psyllium husk. In conclusion, the addition of psyllium affected the expansion of extruded rice snack possessing hard texture, small cells, and sticky texture due to higher water absorption during hydration.

목차
Abstract
서 론
재료 및 방법
    재료
    압출성형공정
    직경팽화율
    비길이
    조각밀도
    겉보기 탄성계수와 파괴력
    조직감
    색도
    수분용해지수와 수분흡착지수
    미세구조
    통계처리
결과 및 고찰
    팽화특성
    겉보기 탄성계수와 파괴력
    조직감
    색도
    수분용해지수와 수분흡착지수
    미세구조
요 약
References
저자
  • 이정원(공주대학교 식품공학과) | Jung Won Lee (Department of Food Science and Technology, Kongju National University)
  • 류기형(공주대학교 식품 및 사료 압출성형 연구센터) | Gi Hyung Ryu (Food & Feed Extrusion Research Center, Kongju National University) Corresponding author