간행물
한국산업경영시스템학회지 KCI 등재 Journal of Society of Korea Industrial and Systems Engineering
- 발행기관 한국산업경영시스템학회
- 자료유형 학술지
- 간기 계간
- ISSN 2005-0461 (Print)2287-7975 (Online)
- 수록기간 1978 ~ 2023
- 주제분류 공학 > 산업공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
Vol. 39 No. 3 (2016년 9월) 21건
1.
2016.09
구독 인증기관 무료, 개인회원 유료
NSS (Navigation satellite system) provides the information for determining the position, velocity and time of users in real time using satellite-networking, and is classified into GNSS (Global NSS) and RNSS (Regional NSS). Although GNSS services for global users, the exactitude of provided information is dissatisfied with the degree required in modern systems such as unmanned system, autonomous navigation system for aircraft, ship and others, air-traffic control system. Especially, due to concern about the monopoly status of the countries operating it, some other countries have already considered establishing RNSS. The RNSS services for users within a specific area, however, it not only gives more precise information than those from GNSS, but also can be operated independently from the NSS of other countries. Thus, for Korean RNSS, this paper suggests the methodology to design the satellite constellation considering the regional features of Korean Peninsula. It intends to determine the orbits and the arrangement of navigation satellites for minimizing PDOP (Position dilution of precision). PGA (Parallel Genetic Algorithm) geared to solve this nonlinear optimization problem is proposed and STK (System tool kit) software is used for simulating their space flight. The PGA is composed of several GAs and iterates the process that they search the solution for a problem during the pre-specified generations, and then mutually exchange the superior solutions investigated by each GA. Numerical experiments were performed with increasing from four to seven satellites for Korean RNSS. When the RNSS was established by seven satellites, the time ratio that PDOP was measured to less than 5 (i.e. better than ‘Good’ level on the meaning of the PDOP value) was found to 94.3% and PDOP was always kept at 10 or less (i.e. better than ‘Moderate’ level).
4,000원
2.
2016.09
구독 인증기관 무료, 개인회원 유료
Control Chart is a graph which dots the characteristic values of a process. It is the tool of statistical technique to keep a process in controlled condition. It is also used for investigating the state of a process. Therefore many companies have used Control Chart as the tool of statistical process control (SPC). Products from a production process represent accidental dispersion values around a certain reference value. Fluctuations cause of quality dispersion is classified as a chance cause and a assignable cause. Chance cause refers unmanageable practical cause such as operator proficiency differences, differences in work environment, etc. Assignable cause refers manageable cause which is possible to take actions to remove such as operator inattention, error of production equipment, etc. Traditionally x-R control chart or x-s control chart is used to find and remove the error cause. Traditional control chart is to determine whether the measured data are in control or not, and lets us to take action. On the other hand, RNELCC (Reflected Normal Expected Loss Control Chart) is a control chart which, even in controlled state, indicates the information of economic loss if a product is in inconsistent state with process target value. However, contaminated process can cause control line sensitive and cause problems with the detection capabilities of chart. Many studies on robust estimation using trimmed parameters have been conducted. We suggest robust RNELCC which used the idea of trimmed parameters with RNEL control chart. And we demonstrate effectiveness of new control chart by comparing with ARL value among traditional control chart, RNELCC and robust RNELCC.
4,000원
3.
2016.09
구독 인증기관 무료, 개인회원 유료
For most organizations, a security infrastructure to protect company’s core information and their technology is becoming increasingly important. So various approaches to information security have been made but many security accidents are still taking place. In fact, for many Korean companies, information security is perceived as an expense, not an asset. In order to change this perception, it is very important to recognize the need for information security and to find a rational approach for information security. The purpose of this study is to present a framework for information security strategies of companies. The framework classifies companies into eight types so company can receive help in making decisions for the development of information security strategy depending on the type of company it belongs to. To develope measures to classify the types of companies, 12 information security professionals have done brainstorming, and based on previous studies, among the factors that have been demonstrated to be able to influence the information security of the enterprise, three factors have been selected. Delphi method was applied to 29 security experts in order to determine sub items for each factor, and then final items for evaluation was determined by verifying the content validity and reliability of the components through the SPSS analysis. Then, this study identified characteristics of each type of eight companies from a security perspective by utilizing the developed sub items, and summarized what kind of actual security accidents happened in the past.
4,300원
4.
2016.09
구독 인증기관 무료, 개인회원 유료
Shuttle-Based Storage/Retrieval System (SBS/RS) is relatively new to industry. The system is in the category of Automated Storage/Retrieval System (AS/RS), but it is different in that the SBS/RS uses shuttles as Storage/Retrieval (SR) machine instead using a stacker crane. The shuttles are assigned to each tier on multi-tier system and operated for pick-up or drop-off order. Since the system can handle multiple orders simultaneously, it can provide much higher throughput than that of general AS/RS with single stocker crane. Thus, this new system is well fit to recent tendency of increasing small quantity batch production and orders. One of the drawback of this system is that it needs a lot of investment to set up. The efficient operation of the system would be one of the critical matters to increase economic efficiency of capital investment. In this study, we focused on the dwell point policy for shuttles to find efficient way of operating the system. There are four basic policies for the dwell point and we had simulation-based experiment for two different scenarios based on the speed of the shuttle and inter-arrival time of the loads coming to the system combined with four different policies. As it was mentioned above, this SBS/RS relatively new to the field and there is no such experiment shown on previous research and the study of dwell point policy for this SBS/RS could provide the direct comparison of each policy with different hardware specification; the capability of the system. The policy that achieves most efficient operation among the given environment is proposed and the usability of the system is discussed.
4,000원
5.
2016.09
구독 인증기관 무료, 개인회원 유료
Loss of postural stability can possibly lead to slip and fall accidents in the number of workplaces and everyday life. This study was aimed to examine the effects of whole body fatigue and partially limited visual field on the ability of maintaining postural balance during quiet standing. A group of twelve healthy male subjects participated in the experiment. Before and after experiencing the whole body fatigue induced by bicycling exercises, the position coordinates of subject’s center of pressure (COP) were obtained under the two levels of visual field condition (i.e., open visual field and limited visual field). Four levels of the whole body fatigue examined were rest, 300watt, 600watt, and 900watt. Position coordinates of COPs measured on a force plate were then converted into the total length of postural sway path in both the medio-lateral (ML) direction and the anterior-posterior (AP) direction. Two-way ANOVA result showed that the length of sway path in the AP direction became significantly larger as the whole body fatigue accumulated. Post-hoc test revealed statistically significant differences between rest and 900watt and between 300watt and 900watt. The significant increase of the sway length was also found when the visual field was partially obstructed by the boxes. In the ML direction, however, there was no statistically significant difference of the postural sway in both the AP and ML directions. The results imply that the ability of maintaining postural stability can be reduced significantly due to such tasks along with whole body fatigue. The postural balance can also be impaired by the limited visual field.
4,000원
6.
2016.09
구독 인증기관 무료, 개인회원 유료
The proliferation of the Internet and related technologies has led to a new form of distribution channels, namely online retailers. The conventional offline and the new online retailers have different transaction costs perceived by the consumers in the following perspectives: the accessibility to the product information, the traffic cost and the opportunity cost for the time to visit the store, the delivery time and the possibility of ‘touch and feel’ to test the quality of the product. In particular, the online retailers have lower distribution cost structure in that they do not have physical stores, which results in lower selling price. Thus they continuously offer price competition against offline retailers using the lower selling cost as competitive weapon. Moreover the emergence of the social commerce is likely to intensify the competition between the online and offline retailers. To survive in this fierce competition, the offline retailers are trying to defend their business interests by sticking to offline transaction in anticipation of increased customer loyalty, customer’s preference for ‘touch and feel’ style shopping, and others. Despite of these efforts, customers who touch and feel a product in an offline store but purchase the product through an online retailer are increasing. To protect such customers, recently, some of the offline retailers began to provide the mobile discount service (MDS) which enables the offline customers to purchase a product at a discounted price through the mobile applications. In business competitions, the price discount strategy is usually considered to secure more market share at the cost of lower profit. In this study, however, we analyze the effect of MDS as a weapon for securing more profit. To do this, we set up a game model between the online and offline retailers which incorporates the effect of the MDS. By numerically analyzing the Nash equilibrium of the game, some managerial implications for using the MDS for more profit are discussed.
4,000원
7.
2016.09
구독 인증기관 무료, 개인회원 유료
For air express service providers offering various express delivery services such as overnight delivery and next-business day delivery services, establishing quickly cargo loading plans is one of important issues owing to the characteristics of air express business, i.e., a short amount of time is available to complete all cargo loading operations before flight departure after receiving air express containers, pallets and bulks. On the other hand, one of major concerns in the air cargo loading planning is to make a plan that insures the stability of an aircraft to avoid take-off, flight, and landing accidents. To this end, this paper considers an air cargo loading planning problem, which is the problem of determining locations in the aircraft cargo space where air containers, pallets and bulks to be loaded while insuring the aircraft stability, motivated from DHL and Air Hong Kong. The objective of the problem is to maximize the total revenue gained from loading air express containers, pallets and bulks. To solve the problem, this paper suggests a simulated annealing algorithm to overcome impracticality of the integer programming model developed by a previous study requiring excessive computation time. The results of computational experiments show that the heuristic algorithm is a viable tool for establishing express cargo loading plans as giving robust and good solutions in a short amount of computation time. Scenario analyses are performed to investigate the effect of the current activities of air express carriers on the revenue change and to draw practical implications for air express service providers.
4,000원
8.
2016.09
구독 인증기관 무료, 개인회원 유료
A Study of Usability Evaluation and Improvement of Weapon System Display GUI Using Performance Model
The recent development of modern weapon system by SOS (System of System) has required users to have more exact decision making. It is possible to achieve the control of complex weapon system more efficiently and effectively by increasing usability. Accordingly, many studies on graphical display have been conducted for several years in the field of HCI (Human Computer Interaction) and GUI (Graphic User Interface), starting from its design stage. Therefore, this paper focuses on evaluating the system GUI usability and analyzing several important points based on performance model, which is a tool for the evaluation and the improvement of service quality. Performance Model, the main focus of this study, reflects user expectations (which is defined as user importance in this paper). The study consists of four steps. First, 34 checklists are drawn from the existing studies related to GUI usability evaluation by using a heuristic method, and then the checklists are matched with 11 weapon system design factors. Next, the study evaluates the importance of GUI element and the usability of weapon system “A” with the checklists twice respectively. Third, the performance of user importance (Pi) and the performance of usability (Pu) are calculated by modifying a numerical formula for normalization in this step. Finally, the study compares the approach it takes and the existing usability evaluation method, demonstrating that there is a significant difference between the two methods as a result. In addition, 4 improvement factors are suggested for weapon system “A” as “Shortcut” and “Description of Abbreviation,” and so on. Although it is necessary to conduct more studies for higher reliability and validity of the results, this study is meaningful considering it takes a new point of view.
4,000원
9.
2016.09
구독 인증기관 무료, 개인회원 유료
The ISO (International Organization for Standardization) 9000 QMS (Quality Management System) standards specify requirements that need to demonstrate an organization’s ability to consistently provide products or services. Korean companies have been implementing ISO 9000 QMS to compete in global markets. ISO 9000 QMS standards have been revised in 1994, 2000, 2008, and 2015 since the first release in 1987. The key change in ISO 9001:2015 is focused on risk-based thinking. It means that risk inherent within an organization is early identified and proactively controlled by use of all aspects of QMS rather than taking preventive actions. In this article we did literature review mainly on empirical study related to motivation and operation performance of ISO 9000 implementation. We present the necessity of changeover, features of new version, and comparison between new and old version. In order to see how well organizations can implement the new ISO 9001:2015 we focus on manufacturing companies that are going to convert to ISO 9001:2015 registration. We collect their key characteristics such as yearly sales, the number of MPI (Management Performance Indicators), the number of KPI (Key Performance Indicators), the number of quality control engineers, quality control engineer work experience, and the degree of adaptiveness between new ISO 9001:2015 QMS and QMS currently operating in manufacturing companies. Especially the degree of adaptiveness is analyzed by correlation analysis, regression analysis, ANOVA, and t-tests to discover the relationships among their characteristics. We found out that the degree of adaptiveness is linearly related to quality control engineer work experience and the number of MPI and KPI that is practically utilized in manufacturing companies. We summarize the implications discovered to help manufacturing industry convert to ISO 9001:2015 registration.
4,300원
10.
2016.09
구독 인증기관 무료, 개인회원 유료
The group formation problem of the machine and part is a critical issue in the planning stage of cellular manufacturing systems. The machine-part grouping with alternative process plans means to form machine-part groupings in which a part may be processed not only by a specific process but by many alternative processes. For this problem, this study presents an algorithm based on self organizing neural networks, so called SOM (Self Organizing feature Map). The SOM, a special type of neural networks is an intelligent tool for grouping machines and parts in group formation problem of the machine and part. SOM can learn from complex, multi-dimensional data and transform them into visually decipherable clusters. In the proposed algorithm, output layer in SOM network had been set as one-dimensional structure and the number of output node has been set sufficiently large in order to spread out the input vectors in the order of similarity. In the first stage of the proposed algorithm, SOM has been applied twice to form an initial machine-process group. In the second stage, grouping efficacy is considered to transform the initial machine-process group into a final machine-process group and a final machine-part group. The proposed algorithm was tested on well-known machine-part grouping problems with alternative process plans. The results of this computational study demonstrate the superiority of the proposed algorithm. The proposed algorithm can be easily applied to the group formation problem compared to other meta-heuristic based algorithms. In addition, it can be used to solve large-scale group formation problems.
4,000원
11.
2016.09
구독 인증기관 무료, 개인회원 유료
Forecasting of box office performance after a film release is very important, from the viewpoint of increase profitability by reducing the production cost and the marketing cost. Analysis of psychological factors such as word-of-mouth and expert assessment is essential, but hard to perform due to the difficulties of data collection. Information technology such as web crawling and text mining can help to overcome this situation. For effective text mining, categorization of objects is required. In this perspective, the objective of this study is to provide a framework for classifying films according to their characteristics. Data including psychological factors are collected from Web sites using the web crawling. A clustering analysis is conducted to classify films and a series of one-way ANOVA analysis are conducted to statistically verify the differences of characteristics among groups. The result of the cluster analysis based on the review and revenues shows that the films can be categorized into four distinct groups and the differences of characteristics are statistically significant. The first group is high sales of the box office and the number of clicks on reviews is higher than other groups. The characteristic of the second group is similar with the 1st group, while the length of review is longer and the box office sales are not good. The third group's audiences prefer to documentaries and animations and the number of comments and interests are significantly lower than other groups. The last group prefer to criminal, thriller and suspense genre. Correspondence analysis is also conducted to match the groups and intrinsic characteristics of films such as genre, movie rating and nation.
4,000원
12.
2016.09
구독 인증기관 무료, 개인회원 유료
The purpose of this study is to present a business strategy plan to increase organizational effectiveness of small and medium-sized enterprises. The research investigated in the level of human resource activity, such as recruitment, education, evaluation, compensation and development for the employees and executives who are working at small and medium-sized enterprises where located in Busan and Gyongnam province. With this, the research carried out actual proof analysis on the level of human resource activity effects on organization effectiveness like job satisfaction and organizational commitment. The following implications can be acquired from the result of multiple regression analysis on the 201 employees of small and medium enterprises. First, small and medium-sized enterprises should carry out human resource management activities and improve research and development capacity to enhance organization effectiveness. Second, in order to improve job satisfaction of the members of small and medium-sized enterprises, the management should concentrate on recruitment activity and reward maintenance management activity and come up with strategies to enhance learning ability and external network ability. Third, in order to enhance organizational commitment of the members of small and medium-sized enterprises, recruitment activity, training activity, and reward maintenance management activity should be carried out and the management should come up with strategies to enhance learning ability and external network ability. In this research, the objective was only to find out antecedents of organization effectiveness, but considering that causality might arise among the antecedents, in the studies hereafter, the verification on the structural relationship of various factors will be needed.
4,000원
13.
2016.09
구독 인증기관 무료, 개인회원 유료
Recently, corporate environment is faced with uncertainty that did not suffer in the past. In addition, as the supply chain was expanded and lengthened, the flow of information and material was complicated. Increase in complexity which amplifies the variability of the individual steps in supply chains further adds to the uncertainty. The bullwhip effect that refers the phenomenon where order variability increases as the orders move upstream in the supply chain became serious. The bullwhip effect is more and more important especially for the enterprise in the supply chain. So, there are many studies now since it was observed about 100 years ago. The aim of this paper is to analyze how to solve the bullwhip effect by using TRIZ (Teoriya Resheniya Izobretatelskikh Zadach). TRIZ is one of the most famous tools for creative solving that applied in many fields ranging from management as well as engineering. Among problems, the dilemma needs creative solutions that require handling the contradictions inherent in that. Among various kinds of problem solving techniques, TRIZ provides the concept of physical contradiction as a common problem solving principle. This study provides a simple process of solving problem explains a case of solving problem in the management field and shows the availability of theory in the inventory control. In accordance with the proposed solving process, the paper analyzes the bullwhip effect by applying the TRIZ tools and then identifies the solution directions. Next, the current studies are classified by the above analysis and important managerial concepts are proposed. Lastly, directions for future research on this area are suggested.
4,000원
14.
2016.09
구독 인증기관 무료, 개인회원 유료
The purpose of this study is to verify the role of moderating effect of pay system on the relation between organizational justice and employee’s pay level satisfaction. By default, it would be a justice find out a positive impact on pay levels satisfaction members feel. It will examine the mediating effect of the wage system the main purpose of this study is to prove their relationship.
A survey was conducted to examine the role of moderating effect of pay system on the responses of 218 employees. sex, education, status, and service type were chosen as control variable, and the regression model which treated the distributive justice and procedural justice as independent variable was set. A pay system was supposed as moderating variable of the relation between organizational justice and pay level satisfaction, In addition the pay system have a dummy variable (if pay system is lower than the average, pay system is 0, else pay system is 1). The result showed that the relation of organizational justice and pay level satisfaction are significantly unique. This means that pay system moderates the relation of organizational justice and pay level satisfaction. These results are different from the prior researches which had treated pay system as mediative variable of organizational justice and pay level satisfaction. This difference may be from the property of attitude variable. For example, pay satisfaction is individual-based attitude. Moreover, organizational committment has the instrumentality for future reward, while pay satisfaction does not. The future study should consider the properties of these variables and other employee's attitude variables.
4,200원
15.
2016.09
구독 인증기관 무료, 개인회원 유료
The train-centric control systems development has some distinct points in that a big size of government budget is in general expended in there and the development duration seems to be long. In addition, the changes are ever made continuously in the capability and operational requirements for Trains. Thus, the impact of the potential changes in the required operational capability on the development activities can induce some type of project risks [7]. As such, proper management of project risk has been one of crucial subjects in the train systems development. All these notes combined together make it the significance of the safety management process be raised further up in the train-centric control systems development. As such, the underlying safety management process should be capable of appropriately handling the potential risks that can be created due to the unexpected changes and the long-term development period. The process should also be complemented for the safety consideration of train-centric control systems, for instance, stop. To study these aspect is the objective of the paper. To do so, a step-by-step approach to analyzing the safety management process is first presented. Then, to enhance the process some necessary and useful activities are added in terms of risk and safety management. Then, to pursue some enhancement on the process, a set of necessary and useful activities are added in terms of risk and safety management. The resultant process is further analyzed and tailored using a design structure matrix method. The resultant process is applied in a train-centric control development as a case study.
4,000원
16.
2016.09
구독 인증기관 무료, 개인회원 유료
This study proposes a methodology to analyse social networks among participating design engineers during product development projects. The proposed methodology enables product development managers or the participating design engineers to make a proper decision on product development considering the performance of participating design engineers. It considers a product development environment where an integrated product data management (PDM) system manages the product development data and associated product development processes consistently in its database, and all the design engineers share the product development data in the PDM database for their activities in the product development project. It provides a novel approach to build social networks among design engineers from an operational product development data in the PDM database without surveys or monitoring participating engineers. It automatically generates social networks among the design engineers from the product data and relationships specified by the participants during the design activities. It allows analysts to gather operational data for their analysis without additional efforts for understanding complex and unstructured product development processes. This study also provides a set of measures to evaluate the social networks. It will show the role and efficiency of each design engineers in the social network. To show the feasibility of the approach, it suggests an architecture of social network analysis (SNA) system and implemented it with a research-purpose PDM system and R, a statistical software system. A product configuration management process with synthetical example data is applied to the SNA system and it shows that the approach enables analysts to evaluate current position of design engineers in their social networks.
4,000원
17.
2016.09
구독 인증기관 무료, 개인회원 유료
Industry 4.0’s goal is the ‘Smart Factory’ that integrates and controls production process, procurement, distribution and service based on the fundamental technology such as internet of the things, cyber physical system, sensor, etc. Basic requirement for successful promotion of this Industry 4.0 is the large supply of semiconductor. However, company I who produces dicing blades has difficulty to meet the increasing demand and has hard time to increase revenue because its raw material includes high price diamond, and requires very complex and sensitive process for production.
Therefore, this study is focused on understanding the problems and presenting optimal plan to increase productivity of dicing blade manufacturing processes. We carried out a study as follows to accomplish the above purposes. First, previous researches were investigated. Second, the bottlenecks in manufacturing processes were identified using simulation tool (Arena 14.3). Third, we calculate investment amount according to added equipments purchase and perform economic analysis according to cost and sales increase. Finally, we derive optimum plan for productivity improvement and analyze its expected effect.
To summarize these results as follows : First, daily average blade production volume can be increased two times from 60 ea. to 120 ea. by performing mixing job in the day before. Second, work flow can be smoother due to reduced waiting time if more machines are added to improve setting process. It was found that average waiting time of 23 minutes can be reduced to around 9 minutes from current process. Third, it was found through simulation that the whole processing line can compose smoother production line by performing mixing process in advance, and add setting and sintering machines. In the course of this study, it was found that adding more machines to reduce waiting time is not the best alternative.
4,000원
18.
2016.09
구독 인증기관 무료, 개인회원 유료
The objective of this study is to investigate patent trends of Daegu city which tries to introduce environment friendly energy and to develop new technology or new industry sprung from technology convergence on smart decentralized energy technology and other technologies. After applying network analysis to corresponding groups of technology or industry convergence, strategy for future energy convergence industry is provided. Patent data applied in Daegu city area are used to obtain research goal. The technology which contains several IPC codes (IPC Co-occurrence) is considered as a convergence technology. Path finder network analysis is used for visualizing and grouping by using IPC codes.
The analysis results categorized 13 groups in energy convergence industry and reclassified them into 3 cluster groups (Smart Energy Product Production Technology Group, Smart Energy Convergence Supply Technology Group, Smart Energy Indirect Application Technology Group) considering the technical characteristics and policy direction. Also, energy industry has evolved rapidly by technological convergence with other industries. Especially, it has been converged with IT industry, and there is a trend that energy industry will be converged with service industry and manufacturing industry such as textile, automobile parts, mechanics, and logistics by employing infrastructure as well as network.
Based on the research results on core patent technology, convergence technology and inter-industry analysis, the direction of core technology research and development as well as evolution on decentralized energy industry is identified. By using research design and methodology in this study, the trend of convergence technology is investigated based on objective data (patent data). Above all, we can easily confirm the core technology in the local industry by analyzing the industrial competitiveness in the macro level. Based on this, we can identify convergence industry and technology by performing the technological convergence analysis in the micro level. 1
4,600원
19.
2016.09
구독 인증기관 무료, 개인회원 유료
In this paper we have tackled the outstanding inventory planning problems over new product launching period in a more holistic manner by addressing first the definition of efficient business rules to effectively control and reduce the inventory risks followed by the rigorous explanations on the implementation guide on suggested inventory planning rules. It is not unusual for many companies in the consumer electronics market to make a great effort to reduce the time to launch a new product because the ability to bring out higher performing products in such a short time period greatly increases the probability for them to remain competitive in the high tech market. Among so many newly developed products, those products with new features and technologies appeal to many potential customers while products which fail to win customers by design and prices rapidly disappear in the market. To adapt to this business environment, those companies have been trying to find the answer to minimize the inventory of old products so they can move to next generation products quickly with less obsolete material . In the experimental implementation of our rule-based inventory planning, Company ‘S’ reduced the inventory cost for the outgoing products as low as 49% of its peak level of its preceding product version in just 5 month after the adoption of rule-based inventory planning process and system. This paper concluded the subject with a suggestion that the best performance of rule-based inventory planning is guaranteed not from one-time campaign of process improvement along with system development but the decision maker’s continuing support and attention even without seeing any upcoming business crisis.
4,000원
20.
2016.09
구독 인증기관 무료, 개인회원 유료
Optimizing energy usage for maximum efficiency is an essential goal for manufacturing plants in every industrial manufacturing sector. The generation and distribution of purifying compressed air is a large expense incurred in practically all manufacturing processes. Not only is the generation and treatment expensive equipment of compressed air, but frequent maintenance and effective operation is also required. As a plant’s compressed air system is often an integral part of the production process, it needs to be reliable, efficient, and easy to be maintain. In this paper, we study to find operating method to save energy from the adsorption dryer in the process of purifying compressed air, which is required for a clean room production site in “A” company.
The compressed air passes through a pressure vessel with two “towers” filled with a material such as activated alumina, silica gel, molecular sieve or other desiccant material. This desiccant material attracts the water from the compressed air via adsorption. As the water clings to the desiccant, the desiccant particle becomes saturated. Therefore, Adsorption dryer is an extremely significant facility which removes the moisture in the air 70℃ below the dew point temperature while using a lot of energy. Also, the energy consumption of the adsorption dryer can be varied by various operating conditions (time, pressure, temperature, etc). Therefore, based on existing operating experiments, we have searched operating condition to maximize energy saving by changing operating conditions of the facility. However, due to a short experiment period (from September to October), further research will be focused on considering seasonality.
4,300원
1
2
