Hydride analysis is required to assess the mechanical integrity of spent nuclear fuel cladding. Image segmentation, which is a hydride analysis method, is a technique that can analyze the orientation and distribution of hydrides in cladding images of spent nuclear fuels. However, the segmentation results varied according to the image preprocessing. Inaccurate segmentation results can make hydride difficult to analyze. This study aims to analyze the segmentation performance of the Otsu algorithm according to the morphological operations of cladding images. Morphological operations were applied to four different cladding images, and segmentation performance was quantitatively compared using a histogram, betweenclass variance, and radial hydride fraction. As a result, this study found that morphological operations can induce errors in cladding images and that appropriate combinations of morphological operations can maximize segmentation performance. This study emphasizes the importance of image preprocessing methods, suggesting that they can enhance the accuracy of hydride analysis. These findings are expected to contribute to the advancements in integrity assessment of spent nuclear fuel cladding.

The Yeongsan River is a prominent inland waterway, alongside the Han River, Nakdong River, and Geum River in South Korea. Numerous bacterial strains were isolated from the Yeongsan River basin for a comprehensive investigation into indigenous prokaryotic species conducted between 2020 and 2023. These bacterial strains were identified using 16S rRNA gene sequencing, wherein 45 bacterial strains shared >98.7% sequence similarities with bacterial species not recorded in Korea thus far. Therefore, this study aimed to catalogue aforementioned unrecorded species and characterize them contingent upon their Gram nature, colony and cell morphologies, biochemical properties, and phylogenetic positions. These bacterial species were determined to be phylogenetically diverse. They were categorized into nine classes, 18 orders, and 25 families. These previously unrecorded species were classified into the following genera and classes: Chitinophaga (class Chitinophagia); Flavobacterium (class Flavobacteriia); Rhodopseudomonas, Gemmobacter, Paracoccus, Azospirillum, Sphingomonas, Novosphingobium, Sphingorhabdus, and Erythrobacter (class Alphaproteobacteria); Bordetella, Pararobbsia, Polynucleobacter, Rhodoferax, Aquabacterium, Malikia, Comamonas, Ideonella, Paucibacter, Undibacterium, Cupriavidus, and Thauera (class Betaproteobacteria); Pectobacterium, Arenimonas, Lysobacter, and Luteimonas (class Gammaproteobacteria); Luteolibacter (class Verrucomicrobiia); Mycolicibacterium, Angustibacter, Ornithinibacter, Janibacter, Schumannella, Aurantimicrobium, Luedemannella, Nocardioides, and Propionicimonas (class Actinomycetes); Geothrix (class Holophagae); and Lactococcus (class Bacilli).

High-entropy alloys (HEAs) have been reported to have better properties than conventional materials; however, they are more expensive due to the high cost of their main components. Therefore, research is needed to reduce manufacturing costs. In this study, CoCrFeMnNi HEAs were prepared using metal injection molding (MIM), which is a powder metallurgy process that involves less material waste than machining process. Although the MIM-processed samples were in the face-centered cubic (FCC) phase, porosity remained after sintering at 1200°C, 1250°C, and 1275°C. In this study, the hot isostatic pressing (HIP) process, which considers both temperature (1150°C) and pressure (150 MPa), was adopted to improve the quality of the MIM samples. Although the hardness of the HIP-treated samples decreased slightly and the Mn composition was significantly reduced, the process effectively eliminated many pores that remained after the 1275°C MIM process. The HIP process can improve the quality of the alloy.

Metarhizium은 대표적인 곤충병원성 진균 중 하나로, 종에 따라 매우 다양한 곤충에게 병원성을 일으키는 폭 넓은 기주범위를 형성한다. 이들이 주로 생성하는 것으로 알려진 destruxins (DTXs)이라는 2차 대사산물은 살충 활성 뿐만 아니라 항바이러스, 항증식, 항암 등 다양한 분야에서 효능이 연구되고 있어, 해당 물질에 대한 관심이 집중되고 있다. 살충 물질로서의 DTXs는 여러 곤충에 있어 병원성을 나타내는 것이 확인되었으나, 해충 으로서 전 세계적으로 심각한 경제적 피해를 일으킴과 동시에, 화학 살충제 저항성 문제가 야기되고 있는 목화진 딧물에 대해서는 아직 DTXs의 역할이 연구되지 않고 있는 실정이다. 본 연구에서는 목화진딧물에 대해 곤충병원 성 진균 Metarhizium spp.의 병원성 발현에 DTXs가 미치는 역할을 간접적으로 확인하기 위해, qPCR을 활용하여 진균 처리 후 목화진딧물 사망 시간과 관련하여 충체 내 DTX 합성효소의 발현을 비교 분석하였다.

Mycoviruses are a group of viruses that infect filamentous fungi. While most hosts infected with mycoviruses do not show any symptoms. In some cases, mycoviruses induce various phenotypic changes include alterations in morphology, drug resistance, pathogenicity, virulence, sporulation, and growth. Entomopathogenic fungi are one of the integrated pest management agents as an alternative to conventional insecticides. Mycoviruses have the potential as supportive agents, enhancing the efficiency of the insecticidal activity of the fungi. Studies about mycoviruses themselves and their interaction with their hosts, especially entomopathogenic fungi, are needed to realize their full potential. In this work, the sequence of the dsRNA element isolated from the entomopathogenic fungus Metarhizium pinghaense 4-2 strain was determined. Through this study, we report the sequence of a dsRNA virus isolated from the Metarhizium pinghaense for the first time. In further studies, the ORF of the mycovirus that induces a phenotype change in the host will be researched.

마이코바이러스는 곰팡이를 감염시키는 바이러스로 자낭균류, 담자균류 및 난균류에서 주로 발견되며 일부 의 경우 곰팡이의 표현형에 영향을 끼치는 것으로 알려져 있다. 이번 연구에서는 대한민국 토양 샘플에서 분리된 65개의 자낭균류 및 접합균류 균주의 전체 핵산을 추출하고, 전기영동을 통해 바이러스 특이적 밴드를 스크리닝 하였다. 스크리닝 결과 65개의 균주 중에서 Tolypocladium spp. 균주 2개와 Marquandomyces marquandii 균주 1개에서 바이러스 특이적 밴드를 발견하였다. 그 후, Cellulose Chromatography를 이용하여 double-stranded RNA 를 분리하고 DNase I 및 S1 Nuclease 처리를 통해 DNA와 single-stranded RNA를 제거하여, Tolypocladium sp. 균주 1개와 Marquandomyces marquandii 균주에서 발견한 특이적 밴드가 dsRNA임을 확인하였다. 추후 virus-free isogenic line을 확보하여 virus 유무에 따른 표현형 변화를 확인하고, 마이코바이러스와 곰팡이 간의 상호작용에 관해 연구할 계획이다.

Aphids are well-known insect pests that, due to their feeding habits, affect various crops' productivity and marketability. Additionally, they cause significant damage worldwide as vectors of viruses. Chemical pesticides are widely used to control these agricultural pests. However, due to resistance to various chemical pesticides, pest control is becoming difficult in agricultural environments. Entomopathogenic fungi such as the genus Metarhizium and Beauveria are being extensively researched as alternatives to these chemical pesticides. In this study, the mycological properties of isolated from soil Metarhizium pemphigi IPBL-H and the insecticidal activity of this strain against Myzus persicae and Aphis gossypii were evaluated for potential of development as a biopesticide.

In this study, we introduce a novel TiN/Ag embedded TiO2/FTO resistive random-access memory (RRAM) device. This distinctive device was fabricated using an environmentally sustainable, solution-based thin film manufacturing process. Utilizing the peroxo titanium complex (PTC) method, we successfully incorporated Ag precursors into the device architecture, markedly enhancing its performance. This innovative approach effectively mitigates the random filament formation typically observed in RRAM devices, and leverages the seed effect to guide filament growth. As a result, the device demonstrates switching behavior at substantially reduced voltage and current levels, heralding a new era of low-power RRAM operation. The changes occurring within the insulator depending on Ag contents were confirmed by X-ray photoelectron spectroscopy (XPS) analysis. Additionally, we confirmed the correlation between Ag and oxygen vacancies (Vo). The current-voltage (I-V ) curves obtained suggest that as the Ag content increases there is a change in the operating mechanism, from the space charge limited conduction (SCLC) model to ionic conduction mechanism. We propose a new filament model based on changes in filament configuration and the change in conduction mechanisms. Further, we propose a novel filament model that encapsulates this shift in conduction behavior. This model illustrates how introducing Ag alters the filament configuration within the device, leading to a more efficient and controlled resistive switching process.

Neoporphyra kitoi Ma. Abe, N. Kikuchi, Tamaki, Tom. Sato, Murase, Fujiyoshi & Mas. Kobayashi has been known as an endemic species in Japan. Its high temperature tolerance suggests that it could be advantageous for cultivation. In this study, we collected it from the Ulleungdo island, Korea and transferred it into Pyropia for a new combination, identified as Pyropia kitoi (Ma. Abe, N. Kikuchi, Tamaki, Tom. Sato, Murase, Fujiyoshi & Mas. Kobayashi) D.J. Kim, T.O. Cho & B.Y. Won comb. nov. based on morphological and molecular analyses. Pyropia kitoi is also reported as a new record species in the list of Korean macroalgal flora. Although we didn’t observe the emergence of new blades from the rhizoidal cells, which is a key character for this species, our molecular analysis of rbcL revealed that our samples from Korea were congruent with “Neoporphyra kitoi” from Japan and were nested within the clade of Pyropia. The gene sequence divergence between the Korean and Japanese samples was 0-0.2%.

As an initial part of Kori-1 & Wolsung-1 Unit decommissioning planning, a characterization plan is developed to define the nature, extent and location of contaminants, determine sampling locations and protocols, determine quality assurance objectives for characterization, and define documentation requirements. The actual characterization of a facility is an iterative process that involves initial sampling according to the characterization plan, field management (such as labeling, packaging, storing, and transport) of the samples, laboratory analysis, conformance to the data quality objectives (DQOs), and then identifying any additional sampling required, refining the DQOs, and modifying the characterization plan accordingly. The final product of the facility characterization is a document that describes the type, amount, and location of contaminants that will require consideration and removal during the decommissioning operations sufficient to prepare a decommissioning plan. In this study, implementing a characterization plan, developed in accordance with this standard, will result in obtaining or deriving the above information.

Kori Nuclear Power Plant Unit 1, which began operating in 1978, is Korea’s oldest commercial nuclear reactor. The reactor was permanently shut down in June 2017, and now the decommissioning process has begun. The decommissioning process will generate a significant amount of waste that requires appropriate management to minimize the impact on the environment and human health. And the waste routing, i.e. the activities and logistics for managing the material generated, is a key point in a decommissioning project. It determines the routes from the material inventory to the envisaged material end states. In this study, we review on several factors for the selection of the waste routes in a decommissioning project. In terms of sustainability, the ‘waste hierarchy’ should be applied to routing materials from nuclear facilities. According to the waste hierarchy, the preferred end state is reuse or recycling of the waste as material or, more preferably, the avoidance of waste generation. In addition, treatments (such as decontamination and thermal treatment) that can reduce the volumes requiring disposal as radioactive waste should be considered. Another important parameter is the need to secure availability and capacity of waste routes. Short-term bottlenecks or any delay in the removal of the waste from the site often has an impact on other site activities. If possible, at least two alternative waste routes should be identified for the main categories of waste and kept available throughout the decommissioning project. All routes should be direct to the material end state if possible, but it is more important that waste is removed from the site so that other site operations are not impeded.

High-entropy alloys (HEAs) are attracting attention because of their excellent properties and functions; however, they are relatively expensive compared with commercial alloys. Therefore, various efforts have been made to reduce the cost of raw materials. In this study, MIM is attempted using coarse equiatomic CoCrFeMnNi HEA powders. The mixing ratio (powder:binder) for HEA feedstock preparation is explored using torque rheometer. The block-shaped green parts are fabricated through a metal injection molding process using feedstock. The thermal debinding conditions are explored by thermogravimetric analysis, and solvent and thermal debinding are performed. It is densified under various sintering conditions considering the melting point of the HEA. The final product, which contains a small amount of non-FCC phase, is manufactured at a sintering temperature of 1250oC.