검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 1,153

        201.
        2019.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES: The objective of this study is to analyze the effect of superelevation on the existing local freeway ramps where occurrence of traffic incidents are concentrated in order to improve the safety of ramp curves. Using a superelevation slope test conducted on Cheong-ju interchange as a case study, operating speed and lateral friction coefficients are measured, and the safety before and after increasing the superelevation is analyzed. METHODS: First, the actual operating speed of freeway ramps is measured for analysis and the 85th-percentile speed is calculated. This is followed by a measurement change in the lateral friction coefficient because of an increase in superelevation slope from 6% to 10%. Based on the change in lateral friction coefficient, an evaluation of the safety of driving mechanics is carried out and suggestions for the most appropriate superelevation slopes are presented. RESULTS: The operating speed (V85) of the loop ramp increases by up to 5.6 km/h after increasing the superelevation slope, and the operating speed (V85) of reverse ramp curve increases by up to 6.1 km/h. However, the standard deviation of the speed between each section has decreased, making it easier to drive smoothly. Although some sections of the loop ramp show poor safety due to the difference between actual and design friction coefficients in the safety evaluation before the increase of superelevation slope, the lateral force decreases after the increase of superelevation slope, improving the safety of the road. CONCLUSIONS : Currently, Korea’s freeway ramps pose a safety risk to vehicles traveling at speeds higher than the design speed. To improve the safety of freeway ramps, analysis on the effect of increase in superelevation slope found that the lateral friction coefficient decreases, which in turn improves the safety of freeway ramps.
        4,000원
        202.
        2019.06 KCI 등재 구독 인증기관·개인회원 무료
        민법 제812조 제1항은 “혼인은 「가족관계의 등록 등에 관한 법률」에 정한 바에 의하여 신고함으로써 그 효력이 생긴다.”고 규정하여 법률 혼주의를 채택하고 있다. 이에 따라 혼인에 관한 규정은 혼인신고를 한 법률상 부부에게 적용이 되며 혼인신고를 마치지 않은 사실혼은 원칙적으로 인정되지 않는다. 다만 사실혼을 보호할 필요성이 있는 경우 혼인 신고를 전제로 한 효과를 제외한 나머지 법률혼의 효과를 인정한다. 판례에 따르면 중혼적 사실혼도 사실관계에 따라 전혼인 법률혼이 사실상 이혼상태에 놓여있는 특별한 사정이 있다면 중혼적 사실혼도 보호할 수 있다. 그러나 판례에서 언급하고 있는 사실상 이혼은 민법 규정에 정한 바 없고, 이제까지 사실상 이혼의 성립요건 및 그 효과에 대하여 논의하고 있는 문헌도 많지 않다. 사실상 이혼을 인정하려면 어떠한 요건을 갖추어야 하고, 어떠한 법률효과가 발생 또는 제한이 되는지에 대하여 연구할 필요성이 있다. 사실상 이혼의 성립에서 살펴보아야 할 것은 부부가 장기간의 별거로 인하여 혼인관계의 실질이 존재하지 않는 경우에 이혼의사의 합치가 있었는가에 따라 다르게 볼 것인가이다. 이와 관련하여 우리 민법상 법률 혼주의와 유책주의 이혼법을 근거로 검토해 보았다.
        206.
        2019.05 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Hole carrier selective MoOx film is obtained by atomic layer deposition(ALD) using molybdenum hexacarbonyl[Mo(CO)6] as precursor and ozone(O3) oxidant. The growth rate is about 0.036 nm/cycle at 200 g/Nm of ozone concentration and the thickness of interfacial oxide is about 2 nm. The measured band gap and work function of the MoOx film grown by ALD are 3.25 eV and 8 eV, respectively. X-ray photoelectron spectroscopy(XPS) result shows that the Mo6+ state is dominant in the MoOx thin film. In the case of ALD-MoOx grown on Si wafer, the ozone concentration does not affect the passivation performance in the as-deposited state. But, the implied open-circuit voltage increases from 576 oC to 620 oC at 250 g/Nm after post-deposition annealing at 350 oC in a forming gas ambient. Instead of using a p-type amorphous silicon layer, high work function MoOx films as hole selective contact are applied for heterojunction silicon solar cells and the best efficiency yet recorded (21 %) is obtained.
        4,000원
        207.
        2019.05 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The characteristics of extracts and precipitates after extraction at different water temperature (25, 50, 75, 95oC), ethanol ratio (25, 50, 75, 100%), and extraction method (stir, soak, autoclave) of yam powder and raw yam were investigated. The total polyphenol content was the highest in the 50% ethanol extract of yam powder. The DPPH radical scavenging activity was the highest in the 75% ethanol extraction and the crude saponin content was the highest in the 95oC water extraction. Tyrosinase inhibitory activity was the highest in 95oC water extraction, low concentration of ethanol extraction, and autoclave extraction. The peak viscosity, trough, and final viscosity of the precipitates increased after ethanol extraction, whereas decreased after the 95oC water extraction and the autoclave, indicating the destruction of starch granules. This was confirmed by observing the starch granules broken using the SEM. The significance of this study was to investigate the possibility of the use of yam resources as a material, processing product development, skin beauty functional food and cosmetic material.
        4,000원
        208.
        2019.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In the present work, a new hydrogen added argon heat treatment process that prevents the formation of hydrides and eliminates the dehydrogenation step, is developed. Dissolved hydrogen has a good effect on sintering properties such as oxidation resistance and density of greens. This process can also reduce costs and processing time. In the experiment, commercially available Ti-6Al-4V powders are used. The powders are annealed using tube furnace in an argon atmosphere at 700oC and 900oC for 120 min. Hydrogen was injected temporarily during argon annealing to dissolve hydrogen, and a dehydrogenation process was performed simultaneously under an argon-only atmosphere. Without hydride formation, hydrogen was dissolved in the Ti-6Al-4V powder by X-ray diffraction and gas analysis. Hydrogen is first solubilized on the beta phase and expanded the beta phases’ cell volume. TGA analysis was carried out to evaluate the oxidation resistance, and it is confirmed that hydrogen-dissolved Ti-6Al-4V powders improves oxidation resistance more than raw materials.
        4,000원
        209.
        2019.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The Sacheonwangsa temple in Silla was completed in 679, just after the unification of the Three Kingdoms. In recent years, we have been critically considering the history of the chronology based on the existence of ‘Geumdang of the previous generation’, which has emerged through the research report of the Sacheonwangsa temple. It is the one to reconsider the construction process of the Sacheonwangsa temple centering on the re-interpretation of the construction time and the character of the first stage of the foundation which was confirmed from within the Geumdang site. The results of this study are as follows : 1)The “Chang(創) of Sacheonwangsa temple” in [Three Affairs that Queen Seondeok had already known] that it is presumed that the construction of the Sacheonwangsa temple, which was designed by Anham before 640 years ago, will convey the fact that the first of the King Munmu's reign (661∼) has been finalized after the initial discussion. 2)Although the theories after excavations are predicated on the existence of ‘Geumdang of the previous generation’, there is no reason to believe that a lasting predecessor building with roof and pillar walls on predecessor buildings is considered to have been built. The foundation was associated with the “build a temple out of coloured silk(以彩 帛營寺)” i.e. ‘Jochang(祖創)’ in 670 years before the construction plan was formally finalized. However, it is presumed that the remains of the platform construction on the premise that it will be used on the construction of Geumdang. 3)The decision to ‘rebuilding(攺刱)’ based on a formal construction plan is determined to be from 670 to 672 years. The maintaining of the original cathedral axis line, to the north on the boundary of the southern limit of the foundation flat portion, the result of developing and embodied the relative position of the Geumdang in the newly determined cathedral unfold and embody, the center of the building base and Geumdang, it is presumed that the centers of them are divided into North and south. 4)The completion of the Sacheonwangsa temple in 679 is understood as the conclusion of ‘rebuilding’ to “build a temple out of coloured silk” i.e. ‘Jochang’ in 670 years. The pent roof of the Geumdang was initially considered not to be in the plan, but it is judged to be before the completion of the Sacheonwangsa temple.
        4,600원
        210.
        2019.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구의 목적은 양돈 농장 관련 차량 이동 데이터를 활용해 농장과 도축장 간 네트워크 분석을 수행하는 데 있다. 구제역과 같은 확산 속도가 빠른 질병에 효과적으로 대응하기 위해서는 초동대응 및 선제적 차단방역이 중요하다. 이러한 방안을 마련하기 위해서는 질병 전파의 주요 매개체인 차량 이동 분석 및 질병이 확산되는 장소인 도축장과 양돈농장의 연계 관계에 대한 분석이 요구된다. 본 연구에서는 KAHIS(국가가축방역통합시스템, Korea Animal Health Integrated System)가 관리하는 차량 이동 데이 터를 기반으로 농장과 도축장 간 바이너리 매트릭스를 생성해 농장과 도축장 간 네트워크 분석을 실시하였다. Rasch model 및 Latent Class Analysis(LCA) 방법을 활용해 농장과 도축장의 위험도를 산출하고, 농장을 군집화하였다. Rasch model 분석 결과, 전라북도와 경기도 농장이 높은 위험도를 보였으며, 이는 질병 전파의 위험도가 높은 것으로도 해석 가능하다. LCA를 활용한 군집 분석 결과, 총 7개의 군집으로 분류되었다. 특히, Rasch model에서 추정된 위험도의 고려했을 때, 4번 군집이 중점적으로 관리되어야 할 대상인 것으로 나타났다. 그 다음으로는 위험도가 0.02수준인 1, 3, 5, 6번 군집이 주의해야 할 대상으로 나타났다. 위험도가 상대적으로 낮은 2, 7번 군집의 경우, 도축장을 통한 질병 전파 위험도는 낮은 수준인 것으로 해석 가능하므로 군집 단위의 관리보다는 개별 농장 단위의 모니터링 관리를 고려해볼 수 있다. 본 연구 결과에서의 양돈 농장과 도축장 간 군집 분석 결과를 고려한다면 김제, 고창과 인접한 정읍, 부안, 익산을 이어서 논산과 공주까지의 전북, 충남의 일부 지역에 대해서만 이동제한을 연장하는 세밀한 방역조치를 생각해볼 수 있었을 것이다.
        4,200원
        218.
        2019.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        목적 : 본 연구의 목적은 얼굴-이름 연상학습을 통해 오차배제훈련이 경도 치매노인의 얼굴-이름기억과 기억 효능감의 향상에 효과가 있는지 알아보기 위함이다. 연구방법 : 연구 대상은 3명의 치매로 진단받은 노인이었고, 연구 설계는 개별사례 실험 연구(single subject experimental research design)중 ABA’ 설계를 사용하였다. 독립변수는 얼굴-이름 연상 학습에 시간차회상 훈련(Spaced Retrieval; SR)을 병행한 오차배제훈련(Errorless Learning; EL)이었다. 종속변수는 얼굴-이름 회상성공률과 실생활에서 얼굴-이름 기억 수준, 한국판 기억평가검사(Korean version of Memory Assessment Scale; K-MAS)의 얼굴즉각 기억과 얼굴지연 기억, 기억 효능감을 측정하였다. 결과 : 오차배제훈련 후 모든 대상자의 얼굴-이름 회상성공률과 실생활에서 얼굴-이름 기억 수준, 얼굴지연 기억, 기억 효능감이 향상되었다. 재기초선 종료 4주 후 치료유지 효과를 측정한 결과 모든 대상자의 향상된 얼굴-이름 회상성공률과 실생활에서 얼굴-이름 기억 수준, 기억 효능감은 유지되었다. 결론 : 본 연구결과를 기반하여 오차배제훈련이 경도 치매 노인의 얼굴-이름기억과 기억 효능감에 효과적인 중재임을 알 수 있었다.
        4,300원
        220.
        2019.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        제조업이 국가경제에서 차지하는 중요성에도 불구하고 고용비중의 급격한 감소는 한국을 포함한 선진국이 당면한 공통의 문제이다. 그 중에서도 과학기술 일자리는 고용의 질과 산업경쟁력에 직결되기 때문에 정책적 차원에서 중요성하나 이에 대한 선행연구는 미진 한 편이다. 본 연구에서는 제조업을 기술체제에 따라 세분화하고 신제품 개발, 신공정 개발, 개 방형 혁신, 정부 R&D지원이 과학기술 일자리 창출에 미치는 영향을 분석하였다. 분석결과 신제품 개발은 과학기술 일자리 확대에 기여하나 신공정 개발은 과학기술 일자리를 감소시키는 것으로 확인되었다. 또한 개방형 혁신은 연구개발 기능의 아웃소싱으로 인해 과학기술 일자리를 감소시키는 효과가 있으며, 정부 R&D 지원은 기술혁신에 대한 수요가 낮은 전통산업의 과학기술 일자리 창출에 기여하는 것으로 나타났다.
        5,800원