표고버섯은 톱밥배지 재배기술의 발달로 세계적으로 가장 많이 생산되고 식용되는 버섯이며, 톱밥배지를 이용하여 재배된 표고버섯의 생산량이 늘고 있다. 본 연구에서는 톱밥재배 표고버섯의 품종별 식품학적 차이를 비교하고자 동일 조건에서 재배된 산조701호, 산조707호, 산조715호, 참아람, L808 총 5품종 표고버섯의 일반성분, 영양성분 및 항산화 활성을 분석하였다. 동결건조된 표고버섯의 일반성분 함량은 회분 4.06~5.92 g/100 g, 조지방 0.75~1.02 g/100 g으로 품종별 차이가 크지 않았으나 조단백질은 21.24~29.15 g/100 g으로 품종간의 유의적 차이를 보였다. Trehalose는 산조701호에서 9.60±0.08 g/100 g 으로 가장 높은 함량으로 확인되었다. 총 아미노산 조성은 glutamic acid>aspartic acid>leucine 순으로 높은 분포를 보였으며, 유의적 차이를 보인 아미노산은 glycine, alanine, valine, isoleucine, leucine, phenylalanine이었으며 산조707 호, 산조715호, 산조701호, 참아람, L808 순으로 높은 함량을 보였다. 물 추출물의 총 폴리페놀 함량과 총 플라보노이드 함량은 산조715호가 3.49±0.04 mg GAE/g, 1.33±0.03 mg QE/g으로 가장 높게 나타났으며 다른 품종 들과 유의적 차이를 나타내었다. 같은 톱밥배지와 환경에 서 재배된 표고버섯 5 품종간의 유의적 차이가 확인된 성분은 조단백질, trehalose, 6종의 아미노산이었다. 하지만 한 곳의 임가에서 재배된 표고버섯 품종간의 비교 결과로, 품종별 시료 수를 확대한 추가실험을 통하여 품종 간의 구별 가능성을 더욱 세부적으로 검토할 필요가 있다.

In this study, a drifting test using a experimental vessel (2,966 tons) in the northern waters of Jeju was carried out for the first time in order to obtain the fundamental data for drift. During the test, it was shown that the average leeway speed and direction by GPS position were 0.362 m/s and 155.54° respectively and the leeway rate for wind speed was 8.80%. The analysis of linear regression modes about leeway speed and direction of the experimental vessel indicated that wind or current (i.e. explanatory variable) had a greater influence upon response variable (e.g. leeway speed or direction) with the speed of the wind and current rather than their directions. On the other hand, the result of multiple regression model analysis was able to predict that the direction was negative, and it was demonstrated that predicted values of leeway speed and direction using an experimental vessel is to be more influential by current than wind while the leeway speed through variance and covariance was positive. In terms of the leeway direction of the experimental vessel, the same result of the leeway speed appeared except for a possibility of the existence of multi-collinearity. Then, it can be interpreted that the explanatory variables were less descriptive in the predicted values of the leeway direction. As a result, the prediction of leeway speed and direction can be demonstrated as following equations. However, many drift tests using actual vessels and various drifting objects will provide reasonable estimations, so that they can help search and rescue fishing gears as well.

한국산업규격(KS)에서 오징어젓은 오징어 배합비율이 75% 이상으로 정하고 있다. 본 연구는 저염 젓갈을 제조하기 위한 기초연구로 유산균 첨가에 따른 영향을 실험한 결과이다. 면역활성이 있는 기능성 유산균을 오징어젓 및 어리굴젓에 각각 첨가한 후, 냉장 또는 실온에서 45일간 보존하면서 미생물학적, 관능적 품질을 평가하였다. 오징어젓은 실온에서 보관한 경우, 보존기간이 경과하면서 유산균 수는 대체로 증가하였다. 어리굴젓의 경우에도 유산균 첨가 시료에서 실온에 2주간 노출한 경우, 생균수가 약 100배 증가하였다. 한편, 일반세균의 경우에는 유산균 첨가 및 비첨가 대조구 모두 현저한 변화가 없이 일정수준으로 유지되는 것으로 나타났다. 미생물 학적 변화를 바탕으로 판단할 경우 본 시험에 공시된 오징어젓 및 어리굴젓은 유산균 첨가에 의한 현저한 미생물의 증식이나 감소는 수반되지 않으며, 소비자가 통상적으로 섭취하는 기간동안 유산균의 빠른 증식은 물론, 일반세균의 증식억제효과는 기대하기 어려울 것으로 판단된다. 그러나 저염화와 더불어 관능적 품질 향상이 뚜렷하게 나타났으며, 기호성이 우수한 제품의 개발이 가능하다고 판단된다.

This study was conducted to determine whether the layout of wheelhouse and work environment of coastal improved stow net fishing boats affect the physical abnormalities of wheelhouse workers through a survey and to use it as basic data to improve the wheelhouse work environment. The analysis results are as follows. The result of factor analysis on the wheelhouse work environment was classified into three factors: suitability of work environment, suitability of work space arrangement, and layout of navigational and fishing equipment. The result of factor analysis on physical abnormalities was divided into two factors: physical pain and fatigue. The results of regression model analysis showing factors affecting physical pain showed that the t-value in the regression model was 3.625 (p < 0.05), indicating that the work environment suitability had an effect on the physical pain. Work environment suitability had a significantly positive effect on the physical pain. As work environment suitability increased by 1, the physical pain increased by 0.371 (p < 0.05). The results of regression model analysis showing the influencing factors on fatigue were found to have a t-value of 3.009 (p < 0.05) in the regression model, indicating that the work environment suitability had a significantly positive effect on the feeling of fatigue. It was found that fatigue increased by 0.324 (p < 0.05) as the work environment suitability increased by 1. In addition, the manageability of task suitability was found to be t = –2.521 (p > 0.05). As the manageability of task suitability increased, the skipper’s fatigue level decreased. From these results, it is inferred that the wheelhouse of the current coastal improved stow net fishing boats causes physical pain and fatigue for the skippers. In order to reduce such physical pain and fatigue, and to improve safe fishing operation and job satisfaction, it is necessary to provide a wheelhouse to fishermen on coastal improved stow net fishing boats in consideration of the characteristics of the wheelhouse work of fishing boats and in consideration of users.

The noise environment was evaluated using the ISO recommended NR evaluation curve and PSIL (Preferred Sound Interference Level) in order to investigate the onboard educational environment according to the noise in the Motor Vessel Saehaerim, a fishing training ship under making way. As a result, NRNs were measured at 37-61 dB in accommodation areas, 44-56 dB in work areas, 37-57 dB in educational and conference areas, 83-103 dB in engine areas and 65.3 dB and 51.2 dB in the work and education areas respectively based on PSIL. The NRNs, which evaluated the cabin of the experimental ship according to the purpose, exceeded all of the indoor standard noise recommended by the ISO, and the PSIL had a generally short conversational distance within 0.25-2.3 m and 0.75-1.3 m for teaching and work areas.

In order to collect basic data for the improvement of fishing systems in coastal improved stow net fishery, a questionnaire survey and on-site hearing were conducted from May 10 to June 11, 2019 on the basic items of coastal improved stow net fishery and safety accidents that occurred during fishing operation. The questionnaire for the survey on the actual conditions of coastal improved stow net fishery consisted of a survey on basic matters (six questions) and a questionnaire (six questions) on safety accidents occurring during fishing operation. The results of the survey on basic items were analyzed by region (Incheon, Seocheon, Gunsan and Mokpo), by the captain’s age (less than 50 years of age, 50 to 60 years and more than 60 years of age), by the captain’s career (less than 20 years, 20 to 30 years, 30 to 40 years and more than 40 years) and by the age of fishing vessel (less than 10 years, 10 to 20 years and more than 20 years). According to the survey on basic items of coastal improved stow net fishery such as the captain’s age, the captain’s career, the age of fishing vessel, the fishing nets in use, the crews on board and the operation days per voyage by region, the average captain’s age was 55.7 years, the average captain’s career was 20.5 years, the average age of fishing vessels was 9.0 years, the average numbers of nets used by fishing boats was 14.0 sets, the average numbers of crew on board a fishing boat was 4.4 persons and the average numbers of operation days per voyage was 4.9 days (p < 0.05). As a result of the survey on safety factors during fishing operations, such as experience of ship accidents, major causes of ship accidents experienced, causes of ship accidents (first priority), experience of human accidents, major causes of human accidents, and causes of human accidents (first priority), more than 96% of the respondents experienced ship accidents including collisions with other vessels or fishing gear during fishing operations. The most significant cause of the accident was the other’s fishing gear installed in the fishing grounds. The first possible causes of ship accidents during fishing operations were found to be other fishing gear installed in fishing grounds, steering or engine failure, and inability to avoid accidents during casting and hauling nets. The survey of the experience of human accidents, such as injuries or sea falls, showed that more than 90% of the respondents experienced human accidents during fishing operations. The most important cause of accidents experienced during fishing operations was stucked in a fishing gear during casting and hauling nets. The first important causes of accidents during fishing operations were movement of the fishing gear during casting and hauling nets, damage of the fishing gear such as rope cutting. The results are expected to be provided as a basic data to prevent safety accidents occurring during fishing operation and improve the fishing system in the coastal improved stow net fishery.

In order to offer specific information needed to assist in operation of a ship with same type rudder through evaluating the maneuverability of training ship A-Ra with flapped rudder, sea trials based full scale for turning test, zig-zag test with rudder angle 10° and 20°, and spiral test at service condition were carried out on starboard and port sides around Jeju Island according to the standards of maneuverability of IMO. As a result, the angular velocity of port turn was higher than that of starboard turn. Therefore, the size of turning circle was longer on the starboard side. In addition, variation of the transfer due to various factors was more stable than those of the others. In the Z-test results, the mean of 1st and 2nd overshoot angles were 9.8°, 6.3° and 15.3°, 9.2° respectively when the port and starboard was 10°; the 1st overshoot angle were 18°, 13.7° when using 20°. Her maneuverability index Tˊ and Kˊ can be easily determined by using a computer with the data obtained from Z-test where Kˊ and Tˊ are dimensionless constants representing turning ability and responsiveness to the helm, respectively. In the Z-test under flap rudder angle 10°, the obtained Kˊ value covered the range of 2.37-2.87 and Tˊ was 1.74-3.45. Under the flap rudder angle 20°, Kˊ and Tˊ value showed 1.43-1.63, 1.0-1.73, respectively. In the spiral test, the loop width was unstable at +0.3° and –0.5°-0.9° around the midship of flap rudder. As a result, course stability was comparatively good. From the sea trial results, training ship ARA met the present criterion in the standards of maneuverability of IMO.

Engaged in trawling in limited fishing grounds with a number of fish schools could cause collisions between fishing vessels. Therefore, providing accurate maneuver information according to the situation could be regarded as essential for improving seafarers safety and fishing efficiency as well as safety of navigation. It is difficult to obtain all maneuver information through sea trial tests only, so a method through empirical formula is necessary. Since most empirical formulas are developed for merchant ship types, especially the characteristics of hull shape parameter like CbB/L and dCb/B etc. are clearly different between fishing vessels and merchant ships, this could occur estimation errors. Therefore, in this study, the authors have selected target fishing vessels and merchant ships and analyzed the characteristics of hull shape parameter according to the ship types. Based on this analysis, the empirical formula developed for the merchant ship type has applied to the target fishing vessels; it has verified through the turning motion simulation that the estimation error could be generated. In conclusion, it is necessary to include the characteristics of the hull shape parameter of fishing vessels in the empirical formula in order to apply the empirical formula has developed for merchant ship types to fishing vessel types.

This study collected and analyzed the fishing process of existing fishing boat and newly built fishing boat by using the video observation methods to understand the improvement of fishing operation efficiency and safety according to the scale change of coastal composite fishing boat. The fishing operation efficiency was calculated by analyzing the frequency of movement, the movement distance and the moving time per basket used in the fishing process to derive the improvement of the newly built fishing boat compared to the existing fishing boat. It was confirmed that the mean frequency of movements decreased to 13.9%, the average moving time decreased to 21.8%, the mean movement distance increased to 20.5% and the movement through the top of gunwale did not occur. Movement of frequency, increased and time according to the fishing operation were directly affected by the width of side passages and the presence or absence of walking obstruction such as bulwark stay, hatch coaming and fishing gears on deck. The results of this study are expected to be used as basic data for redesigning into a safe and efficient coastal composite fishing boat in the future.

This research carried out a study on the job characteristics of the skipper of the coastal composite fishing vessels in order to find a way to prevent the ship collision caused by the highest human error among the marine casualty of fishing boats. Video observation was used as the research method in which six CCD cameras were installed on the vessel to collect image data and data extracted from the image were analyzed to derive the results of the functional activity of skipper according to the fishing operation process of experimental fishing vessel. The results are as follows. The working process of the experimental fishing vessel consisted of navigation for fishing ground, setting line, waiting for hauling line, hauling line and navigation to homeport. In these processes, the skipper was performing watchkeeping in the wheelhouse in which he carried out a single task, a dual task that performed two tasks simultaneously, and a triple task that performed two or more tasks simultaneously. In addition, one of the risk factors causing the collision was a no watchkeeping in the wheelhouse for navigating for fishing ground, waiting for hauling line, and hauling line at 25.4%, 64.6% and 0.3%, respectively among the marine casualty while drowsiness caused 1.2% of the marine casualty in navigating for fishing ground. Concurrent tasks that simultaneously perform two or more tasks that can overlook any other important duties while carrying out watchkeeping in the wheelhouse include 51.3% of navigation for fishing ground, 81.9% of setting line, 19.0% of waiting for hauling line, 87.9% of hauling, and 88.7% of navigation to homeport. The above concurrent tasks yielded an average of 66.1%. Experimental fishing vessels are required to focus on ship handling operations related to fishery operations, and the skipper is assigned more activities and attention to fishery related tasks. Therefore, it is considered desirable to build a collision prevention system that is appropriate to the characteristics of the skipper’s work, escaping from transferring the responsibility of ship collision to the skipper completely.

서론 재료 및 방법 결과 및 고찰 참고문헌

We conducted a questionnaire survey to analyze the current status of the coastal composite fisheries, as well as the improvement point in designing a new type coastal composite fishing boat suitable for Korean fishing environments from April to August 2017. The questionnaire composed of 20 questions about the features of the coastal composite fishing boat and fishing work. The survey sites were selected to cover all parts of the country by considering the geographical position. The significance testing for the response results was accessed by  test and ANOVA. The results revealed that more than half (59.1%) of the fishermen operated one day per voyage and operating alone topped with 22.5% in the number of crews, followed by 2 persons (20.3%) and 5 persons (22.1%). The navigation devices had a high rate of installation and GPS plotter ranked first in the devices. In addition, fish finder ranked first in fishing equipment, followed by net hauler. The most inconvenient work that they felt during the fishing operation was fish handing at 49.8% and other general fishing works like setting and hauling line, deck cleaning accounted for about 25%. The hardest work was the accident by ropes wrapped around propeller and the engine trouble came in second. The most inconvenient facilities to the present design of fishing boat was wheelhouse (76.7%), followed by fish hold (38.5%), and deck (35.1%). Furthermore, inconvenient points related to the movement of fishing gear, noise and vibration of engine, slippery deck and small fish hold exceeded 50%.