Over the past decade, in-feed native advertising has become one of the most popular forms of online advertising, attracting attention from both academia and industry. Compared to traditional online ads, in-feed native ads are less intrusive and have more engaging content, effectively reducing users' tendency to avoid ads and improving advertising effectiveness. Despite existing review studies, most of them focus on specific aspects of in-feed native advertising, such as ad identification, disclosure, or regulation, and lack an overview of the relevant literature. Moreover, with the diversified development of digital media forms, the widespread application of AI technologies, and the improvement of consumers' ad literacy, in-feed native ad research faces new issues and practical challenges. Thus, a systematic review of existing research is necessary to identify valuable future research directions.

From 2020, Korean Animal and Plant Quarantine Agency has reset the withdrawal time (WT) for veterinary drugs typically used in livestock in preparation for the introduction of positive list system (PLS) program in 2024. This study was conducted to reset the MRL for amprolium (APL) in broiler chickens as a part of PLS program introduction. Forty-eight healthy Ross broiler chickens were orally administered with APL at the concentration of 60 mg/L (APL-1, n=24) for 14 days and 240 mg/L (APL-2, n=24) for 7 days through drinking water, respectively. After the drug treatment, tissue samples were collected from six broiler chickens at 0, 1, 3 and 5 days, respectively. Residual APL concentrations in poultry tissues were determined using LC-MS/MS. Correlation coefficient (0.99 >), the limits quantification (LOQ, 0.3~5.0 μg/kg), recoveries (81.5~112.4%), and coefficient of variations (<15.5%) were satisfied the validation criteria of Korean Ministry of Food and Drug Safety. In APL-1, APL in all tissues except for kidney was detected less than LOQ at 3 days after drug treatment. In APL-2, APL in liver and kidney was detected more than LOQ at 5 days after treatment. According to the European Medicines Agency’s guideline on determination of withdrawal periods, withdrawal periods of APL-1 and APL-2 in poultry tissues were established to 3 and 2 days, respectively. In conclusion, the developed analytical method is sensitive and reliable for detecting APL in poultry tissues. The estimated WT of APL in poultry tissues is longer than the current WT recommendation of 2 days for APL in broiler chickens.

본 연구는 신생아 검사 중 포수클로랄(chloral hydrate)을 투여 후 진행되는 신생아 진정 검사 대비 진정 대체 방식 중 하나인 피드 및 랩(feed and wrap) 방식의 유용성을 평가한 연구이다. 본 연구에선 진정으로 진행한 신생아의 두뇌 T2 축면 영상과 피드 및 랩 방식으로 진행한 같은 영상 각 30개의 운동 허상(motion artifact)과 백질과 회백질의 구분 정도를 두 명의 영상의학과 전문의가 정성적으로 평가하였고, 운동 허상을 측정하기 위해서 위상부호화(phase encoding) 방향의 배경 영역(background area)의 평균 신호 강도(mean signal intensity)를 구하여서 정량적 방식으로 평가하였다. 또한 총검사 시간을 정리한 뒤 정량적 방식으로 평가하였고 투약 기록의 여부와 간호일지를 토대로 피드 및 랩 방식의 총 39건의 검사 건수 대비 성공률을 측정하였다. 운동 허상의 정량적 평가와 영상 품질의 정성적 평가 모두에서 두 집단은 유의미한 차이가 없었으나, 검사 시간의 정량적 평가에선 p값이 0.001로 유의한 차이가 있었다. 피드 및 랩 방식의 총검사 건수 대비 성공률은 100%였다. 결론적으로 본 논문에선 피드 및 랩 방식과 진정 방식의 영상 품질이 유의한 차이가 없고 성공률이 높기에 유용하다고 판단하였으나, 검사 시간이 더 지연되는 한계가 있다는 사실을 확인하였다.

Porous carbons are considered promising for CO2 capture due to their high-pressure capture performance, high chemical/ thermal stability, and low humidity sensitivity. But, their low-pressure capture performance, selectivity toward CO2 over N2, and adsorption kinetics need further improvement for practical applications. Herein, we report a novel dual-templating strategy based on molten salts (LiBr/KBr) and hydrogen-bonded triazine molecules (melamine–cyanuric acid complex, MCA) to prepare high-performance porous carbon adsorbents for low-pressure CO2. The comprehensive investigations of pore structure, microstructure, and chemical structure, as well as their correlation with CO2 capture performance, reveal that the dual template plays the role of porogen for multi-hierarchical porous structure based on supermicro-/micro-/meso-/ macro-pores and reactant for high N/O insertion into the carbon framework. Furthermore, they exert a synergistic but independent effect on the carbonization procedure of glucose, avoiding the counter-balance between porous structure and hetero-atom insertion. This enables the preferred formation of pyrrolic N/carboxylic acid functional groups and supermicropores of ~ 0.8 nm, while retaining the micro-/meso-/macro-pores (> 1 nm) more than 60% of the total pore volume. As a result, the dual-templated porous carbon adsorbent (MG-Br-600) simultaneously achieves a high CO2 capture capacity of 3.95 mmol g− 1 at 850 Torr and 0 °C, a CO2/ N2 (15:85) selectivity factor of 31 at 0 °C, and a high intra-particle diffusivity of 0.23 mmol g− 1 min− 0.5 without performance degradation over repeated use. With the molecular scale structure tunability and the large-scale production capability, the dual-templating strategy will offer versatile tools for designing high-performance carbon-based adsorbents for CO2 capture.

Some consumer goods containing radioactive substances are in circulation and used in everyday life. In accordance with the Nuclear Safety Act, consumer goods with radioactivity are regulated. However, since most consumer goods distributed in Korea have no information that can confirm the amount of radiation, it is necessary to analyze the radiation for safety regulation. Among these consumer goods, GTLS (Gaseous Tritium Light Source) contains gaseous tritium (tritium, written as 3H or T), which is a radioactive material. The gaseous composition ratio in GTLS was analyzed using a precision gas mass spectrometer (Thermo Fisher, model MAT 271). As a result of GTLS analysis, the H2, HD or H3 +(T) or 3He, HT or D2 or He, DT, and T2, which correspond to the mass-to-charge ratio (m/z) 2 to 6 and the air components were detected. In addition, substances corresponding to m/z=24 and m/z=21 were also detected. These were compared with pure CH4 and those fragmentation patterns. The ratios of CT4 (m/z = 24) to CT3 (m/z = 21) and CH4 (m/z = 16) to CH3 (m/z = 15) were compared and they agree within the measurement uncertainty. We also performed additional experiments to separate the water component in the GTLS samples, considering the possibility that the m/z = 21 to m/z = 24 region is tritium compounds based on H2O. Despite the removal of the water components, peaks were detected at m/z=21 and m/z=24. Therefore, we confirmed that the component of m/z = 24 in the GTLS sample was CT4.

The 2007 Recommendation of the International Commission on Radiological Protection recommended the application of dose constraints to optimize radiation protection to resolve the inequity of exposure among radiation workers. The average annual occupational doses in Korean nuclear power plants (NPPs) are 0.3-0.8 mSv. These doses are much lower than the annual effective dose limit of 50 mSv for radiation workers stipulated by the Nuclear Safety Act. In addition, most NPP workers received less than 0.1 mSv per year. These doses are lower than the average annual occupational doses of 0.3- 0.8 mSv. Korean regulatory body conducted the study to legislate the dose constraints in the Korean regulatory system and determine dose constraints (draft) for radiation workers. The legislation of dose constraints would not greatly affect the radiation protection programs in Korean NPPs because most workers received very low doses. However, some workers received relatively higher doses than others. This study analyzed the occupational exposure conditions, such as exposure type and situation, in Korean NPPs. This study investigated the internal and external radiation doses and the radiation doses depending on the NPP operating conditions, including normal operation, planned maintenance, and intermediate maintenance, for the last ten years (2012-2021). As a result, most NPP workers received external exposure rather than internal exposure. Furthermore, most radiation exposures occurred during the planned maintenance period. The results of this study can be used for optimizing occupational doses in Korean NPPs.

The site used for a nuclear facility can be released after decommissioning if the results of dose estimation meet the regulatory requirements and the site release is approved by the regulatory body. RESRAD-ONSITE, developed by the Argonne National Laboratory, is a computer code used to estimate the dose to the residents on radiologically contaminated sites. The dose estimation for site release should consider various exposure pathways, including inhalation, ingestion, and external exposure. This study used RESRAD-ONSITE to evaluate the internal exposure dose and identify radionuclides due to the intake of food produced on radiologically contaminated sites. The upper limit of the clearance level of radionuclides expected to remain at the site was used as the source terms for the dose evaluation. In addition, the amount of food intake per capita was obtained from eight countries using nuclear power generation as of 2020. The default values of RESRAD were used for other parameters except for intake by type of food and source terms. As a result of the dose evaluation, the contaminated water and vegetables showed a great contribution to the exposure dose. The dose due to tritium in drinking water was highest in the third year. In addition, regarding the intake of vegetables, the internal exposure due to 90Sr was the highest in the first year.

As of 2023, there are a total of 24 nuclear power plants (NPPs) in operation in Korea, with 21 pressurized water reactors (PWRs) and three pressurized heavy water reactors (PHWRs). Korean NPPs discharge radioactive effluents into the environment every year. Radioactive effluents from NPPs contain various radionuclides and materials, including 3H, 14C, Noble gas, particulates, and iodine Among the radioactive effluents discharged from Korean NPPs, 14C is a pure beta emitter with a half-life of 5,730 years. The human body can inhale and ingest 14C to cause internal exposure. In addition, the amount of 14C present in the environment is decreasing, but the amount of 14C discharged from NPPs is increasing. 14C discharged to the environment can be inhaled and ingested by the public around NPPs through various pathways. For this reason, it is very important to monitor and manage 14C because it affects the dose of the public around NPPs. Therefore, this study compared and analyzed the average emissions of 14C discharged from PWRs and PHWRs during the recent 10 years (2012-2021). An average of the public dose due to 14C released from NPPs depending on the reactor types from 2012 to 2021 was also compared. It is inevitable to discharge radioactive effluents while operating NPPs. Korea Hydro & Nuclear Power (KHNP) manages and monitors radioactive effluents released into the environment. According to a survey and analysis of 14C discharged from PWRs and PHWRs and the average dose of the public over the recent 10-year (2012-2021) around Korean NPPs, 14C released from PWR accounted for 3.1% of the total discharge but accounted for more than 93.67% of the total public dose. In addition, 14C discharged from PHWRs accounted for 1.12% of the total discharge, but its resulting dose to the public accounted for more than 83.87% of the total public dose. As a result of analyzing the public dose due to 14C from 2012 to 2021, it was gradually increasing every year. Based on these results, monitoring and managing 14C discharge and its resulting doses to the public are important in the future.

After the Fukushima nuclear accident in Japan in March 2011, many Koreans were concerned that products exposed to radioactive materials released from the nuclear power plant would be imported into Korea. Systematic radiation monitoring was required for food and daily necessities imported from the nuclear accident area. The need for a legal system to support systematic radiation monitoring was also demanded. The Act on Protective Action Guidelines against Radiation in the Natural Environment was enacted to resolve concerns regarding environmental radiation in Korea in July 2011. According to this law, radiation monitoring equipment has been installed and operated at major airports and ports nationwide. This paper aims to review the radiation monitoring system of the Korean government comprehensively. The legal system and the legal basis for radiation monitoring of imported cargo conducted by each department were investigated by analyzing the laws and regulations of radiation monitoring for the relevant cargo items. In addition, the current status of radiation monitoring by the government departments was examined to determine how radiation monitoring for imported cargo is performed within the legal system. The investigation of the current radiation monitoring system for imported cargo in Korea confirmed that radiation monitoring is conducted by classifying cargo items under the jurisdiction of each government department for all imported cargo. However, the reduction in efficiency of radiation monitoring of imported cargoes, unclear legal grounds for radiation monitoring of imported cargo by some departments, the occurrence of overlapping inspections by departments, and the difficult process of issuing the radiation test certificate required for customs clearance by the Korea Customs Service were also identified. As a result of the analysis, it was found that the current radiation monitoring system for imported cargo in Korea ought to be improved, taking into account efficiency, overlapping inspection, legal background, and the difficult process of issuing the certificates.

According to IAEA PRIS, there is no record of dismantling commercial heavy water reactors among 57 heavy water reactors around the world. In Canada, which has the largest number of heavy water reactors, three of the 22 commercial heavy water reactors with more than 500 MW are permanently suspended, Gentilly unit 2 (2012), Pickering unit 2 (2007), and Pickering unit 3 (2008), all of which chose a delayed decommissioning strategy. On the other hand, Wolsong unit 1, which will be the world’s first heavy water reactor to be dismantled commercially, will be immediately carried out as a decommissioning strategy. KHNP has established various cooperation systems with advanced companies and international organizations related to overseas NPP decommission and is actively exchanging technologies. Among them, the most important focus is on research cooperation related to COG (CANDU owners Group). The first case is a joint study on Conceptual Calandria Segmentation. Four areas of process, waste management, ALARA, and cost for decommissioning reactors to be submitted to Canadian regulators for approval of Pickering and Gentilly-2’s preliminary decommissioning plan have been evaluated, and research on Wolsong unit 1 is currently underway. The second case is Decommissioning and long-term waste management R&D. Although the technical maturity is low, it studies the common interests of member companies in the decommissioning of heavy water reactor power generation companies and long-term waste management. Robotics for dismantling high-radiation structures, C- 14, H-3 measurement and removal methods, and concrete decontamination technology, which are characterized by heavy water, are being actively studied. KHNP is strengthening international cooperation with COG to prepare for the successful decommissioning of Wolsong unit 1. Based on previous studies by Pickering and Gentilly-2, an evaluation of the decommissioning of Wolsong unit 1 reactor is being conducted. In addition, it is preparing for decommissioning through experience analysis of the pressure tube replacement project.

KHNP is carrying out international technical cooperation and joint research projects to decommission Wolsong unit 1 reactor. Construction data of the reactor structures, experience data on the pressure tube replacement projects, and the operation history were reviewed, and the amount of dismantled waste was calculated and waste was classified through activation analysis. By reviewing COG (CANDU owners Group) technical cooperation and experience in refurbishment projects, KHNP’s unique Wolsong unit 1 reactor decommissioning process was established, and basic design of a number of decommissioning equipment was carried out. Based on this, a study is being conducted to estimate the worker dose of dismantling workers. In order to evaluate the dose of external exposure of dismantling workers, detailed preparation and dismantling processes and radiation field evaluation of activated structures are required. The preparation process can be divided into dismantlement of existing facilities that interfere with the reactor dismantling work and construction of various facilities for the dismantlement process. Through process details, the work time, manpower, and location required for each process will be calculated. Radiation field evaluation takes into account changes in the shape of structures by process and calculates millions of areas by process, so integrated scripts are developed and utilized to integrate input text data. If the radiation field evaluation confirms that the radiation risk of workers is high, mutual feedback will be exchanged so that the process can be improved, such as the installation of temporary shields. The results of this study will be used as basic data for the final decommissioning plan for Wolsong unit 1. By reasonably estimating the dose of workers through computer analysis, safety will be the top priority when decommissioning.

Metal waste generated during the dismantling of a nuclear power plant can be contaminated with radionuclides. In general, the internal structure is very complex. Thus, metal waste requires various cutting processes. When metal waste is cut, aerosols are generated. Aerosols are generally various particles of very small size suspended in the working area and remain for a considerable period. This may cause internal exposure of workers due to inhalation of radioactive aerosols generated when cutting radioactive metal waste. This study investigated various cutting processes and the size distribution of aerosols generated during the cutting process. The cutting process is normally classified into thermal cutting, mechanical cutting, and laser cutting. Thermal cutting includes plasma, flame, and oxygen cutting. Mechanical cutting includes mechanical saws, cutters, nibblers, and abrasive water jets. Stainless steel, carbon steel, aluminum, and copper are commonly used as cutting materials in nuclear power plants. The size of the aerosol generated from cutting showed a very diverse distribution depending on the cutting methods and cutting materials. In general, aerosol size is distributed within 0.1-1 μm. This size distribution is different from the 5 μm aerosol size suggested by the ICRP Publication 66 Lung model. These results show that it is necessary to conduct further studies on the size of aerosols generated when decommissioning nuclear power plants.

Currently, there are 25 nuclear power plants (NPPs) in operation in Korea, including 22 pressurized water reactors (PWRs) and three pressurized heavy water reactors (PHWRs). Two NPPs, including Kori Unit 1 and Wolsong Unit 1, are permanently shut down and awaiting decommissioning. If Kori Unit 2, which is expected to be permanently shut down soon, is included, the number of decommissioning NPPs will be increased to three. Spent fuels (SFs) are continuously generated during the NPP operation, which are stored in an SF storage pool in NPPs to cool down the decay heat emitted from SFs. For safe NPP operation, SFs must be regarded as waste, and a disposal site must be selected to isolate SFs. However, an appropriate site has yet to be selected in Korea. SFs contain long-lived nuclides with a high specific activity. For disposal, it is important to characterize the nuclides in the fuels and delay the migration of the nuclides to the environment when SFs are placed in a future disposal facility. If the disposal container is broken, the nuclides in the fuels escape from the filling material, such as bentonite. These escaped nuclides are dissolved in groundwater and migrate to the surface of the earth. Thus, it is possible to assess the radiological impact, such as the exposure dose during and after the disposal, if the types and characteristics of nuclides in SFs are known. This study investigated the nuclides in SFs and identified exposure scenarios that may occur in the disposal process of SFs and migration characteristics when the nuclides leak into groundwater to propose a dose assessment methodology for workers and the public.

Bentonite has been considered as a potential buffer material in the engineering barriers of highlevel radioactive waste disposal systems. The intrusion of groundwater and heat from the waste change the temperature of the bentonite, which can alter the hydraulic properties of the bentonite. In this study, temperature effects on permeability were observed in two Ca-type bentonites. Laboratory tests were conducted on two types of block that were compacted using Korean Gyeongju bentonite and bentonil-WRK at different dry densities. Permeability tests were conducted at three different temperatures, namely 30°C, 60°C, and 90°C, using deionized water. Moreover, comparison between two Ca-type bentonites is carried out.

The domestic representative nuclear fuel cycle facilities are post-irradiation examination facility (PIEF) and Irradiated Examination Facility (IMEF) at KAERI. They have regularly operated since 1991 and 1993, respectively. Due to the long period of use, the facilities are ageing, and maintenance costs are increasing every year. The maintenance methods have mainly been breakdown maintenance (BM) and partially preventive maintenance (PM). They involve replacing components that have problems through periodic inspections by on-site inspectors. However, these methods are not only uncertain in terms of replacement cycles due to worker’s deviation on the inspection results, but also make it difficult to respond accidents developed through failures on the critical equipment that confines radioactive material. Therefore, an advanced operation and maintenance studied in 2022 through all of nuclear facilities operated at KAERI. Advancement strategy in four categories (safety, sustainability, performance, innovativeness) was analyzed and their priorities according to a facility environment were determined so a roadmap for advanced operation and maintenance could be developed. The safety and sustainability are higher importance than the performance and innovativeness because facilities at KAERI has an emphasis on research and development rather than industrial production. Thus, strategy for advancement has focused even more on strengthening the safety and sustainability. To enhance safety, it has been identified that immediate improvement of aged structures, systems, and components (SSCs) through large-scale replacement is necessary, while consideration of implementing an ageing management program (AMP) in the medium to long term is also required. Facility sustainability requires strengthening operation expertise through training, education, and cultivation of specialized personnel for each system, and addressing outstanding regulatory issues such as approval of radiation environment report on the nuclear fuel processing facilities and improvement work according to fire hazard analysis. One of the safety enhancement methods, AMP, is a new maintenance approach that has not been previously applied, so it had to be thoroughly examined. In this study, an analysis was conducted on the procedure and method for introducing an AMP. An AMP for nuclear fuel cycle facilities was developed by analyzing the AMP applied to the BR2 research reactor in Belgium and modifying it for application to nuclear fuel cycle facilities. The ageing management for BR2 has the objective to maintain safety, availability and cost efficiency and three-step process. The first step is the classification of SSCs into four classes to apply graded approach. Secondly, ageing risk is assessed to identify critical failure modes, their frequency and precursors. Final step involves defining measures to reduce the ageing risk to an acceptable level in order to integrate the physical and economic aspects of ageing into a strategy for inspection, repair, and replacement. Similar approach was applied to the nuclear fuel cycle facility. Firstly, the SSCs of nuclear fuel cycle facilities have been classified according to their safety and quality classifications, as well as whether they are part of the confinement boundary. The SSCs involved in the confinement boundary were given more weight in the classification process, even if they are not classified as safety-class. A risk index for ageing was introduced to determine which prevention and mitigation measure should be chosen. By multiplying the health index and the impact index, the ageing risk matrix provides a numerical score that represents guidance on the prevention and mitigation of ageing effect. The health index is determined by combining the likelihood of failure and engineering evaluation of the current condition of SSCs, whereas the impact index is calculated by taking into account the severity of consequences and the duration of downtime resulting from a failure. This ageing management has to be thoroughly reviewed and modified to suit each facility before being applied to nuclear fuel cycle facilities.