This experiment was conducted to a comparison of the productivity according to variety and forage quality by plant parts of imported silage corn (Zea mays, L) in Pyeongchang. The corns evaluated in this experiment were 8 varieties (P1184, P1151, P1194, P1543, P1345, P1429, P1443, and P2105) introduced from the United States, Pioneer Hybrid Co. The harvested corn was divided into 5 plant parts (leaf, stem, cob, husk, and grain), and the ratio of each part was calculated using dry weight and the feed value was analyzed. The emergence rate of corn was generally good except for the P1151 and P2105 varieties. The average tasseling date was July 24th and the silking date was July 27th, but the P2105 variety was late to July 28th and August 1st, and the remaining varieties were similar. P1345 was the highest (289 and 123 cm), and P1151 varieties were the lowest (267 and 101 cm) in the plant and ear height. Disease resistance was low in P1184, P1443 and P1429, and P1197 and P1345 were high. In the case of stover, the dry matter (DM) content was the lowest at 19.6% in the P1151 and the highest at 24.9% in the P1429. DM content of ear was the highest in the P2105 (55.5%), and P1184 (54.2%) and P1345 (54.3%) were also significantly higher (p<0.05). The DM yield of stover of P2105, P1429 and P1194 varieties was significantly higher (p<0.05), and ear yield of P2105, P1345 and P1443 was higher. The proportions of each part of plants (leaf, stem, cob, husk, and grain) divided by 5 was high, with 50-60% of the ear(grain+cob) ratio. The ratio of husk and cob was roughly similar, and the leaf and stem part showed a ratio of about 20%. The crude protein (CP) content was highest in leaf, followed by grain. The CP content of the stem was the lowest, and the husk was not significantly different among the varieties (p>0.05). The acid detergent fiber (ADF) content was similar to the rest parts except grain, but the leaf part tended to be lower, and other parts except the stem and leaf showed no significant difference between varieties (p>0.05). There was no significant difference in NDF (neutral detergent fiber) content in husk, but there was a difference between varieties in other parts (p<0.05). In addition, there was a special difference by plant parts for each variety, P2015 on the stem, P1197 on the leaf, P1151 on the cob, P1197 on the husk, and P1197 on the grains with high NDF content. IVDMD (in vitro dry matter digestibility) was not significantly different between stems and grains, but there was a difference between varieties in cobs and husks. According to the results, DM yield of P2105 variety was the best in the experiment, and the ratio of grain was excellent in P1543 and P1345. In addition, it was found that the feed value was higher in the leaves and grains, and the leaf and stem had higher feed values than husk or cob.

This study was conducted to compare the agronomic characteristics and productivity according to the species and varieties of winter forage crops in reclaimed land. Winter forage crops used in this study were developed in National Institute of Crop Science, RDA. Oats (‘Samhan’, ‘Jopung’, ‘Taehan’, ‘Dakyung’ and ‘Hi-early’), forage barley (‘Yeongyang’, ‘Yuyeon’, ‘Yujin’, ‘Dacheng’ and ‘Yeonho’), rye (‘Gogu’, ‘Jogreen’ and ‘Daegokgreen’) and triticale (‘Shinyoung’, ‘Saeyoung’, ‘Choyoung’, ‘Sinseong’, ‘Minpung’ and ‘Gwangyoung’) were planted in the reclaimed land of Sihwa district in Hwaseong, Gyeonggi-do in the autumn of 2018 and cultivated using each standard cultivation method, and harvested in May 2019(oat and rye: 8 May, barley and triticale: 20 May.) The emergency rate was the lowest in rye (84.4%), and forage barley, oat and triticale were in similar levels (92.8 to 98.8%). Triticale was the lowest (416 tiller/㎡) and oat was the highest (603 tiller/㎡) in tiller number. Rye was the earliest in the heading date (April 21), triticale was April 26, and oat and forage barley were in early May (May 2 and May 5). The plant height was the highest in rye (95.6 cm), and triticale and forage barley was similar (76.3 and 68.3cm) and oat was the lowest (54.2 cm). Dry matter(DM) content of rye was the highest in the average of 46.04% and the others were similar at 35.09∼37.54%. Productivity was different among species and varieties, with the highest dry matter yield of forage barley (4,344 kg/ha), oat was similar to barley, and rye and triticale were lowest. ‘Dakyoung’ and ‘Hi-early’ were higher in DM yield (4,283 and 5,490 kg/ha), and forage barley were higher in ‘Yeonho’, ‘Yujin’ and ‘Dacheng’ varieties (4,888, 5,433 and 5,582 kg/ha). Crude protein content of oat (6.58%) tended to be the highest, and TDN(total digectible nutrient) content (63.61%) was higher than other varieties. In the RFV(relative feed value), oats averaged 119, while the other three species averaged 92∼ 105. The weight of 1,000 grain was the highest in triticale (43.03 g) and the lowest in rye (31.61 g). In the evaluation of germination rate according to the salt concentration (salinity), the germination rate was maintained at about 80% from 0.2 to 0.4% salinity. The correlation coefficient between germination and salt concentration was high in oat and barley (-0.91 and -0.92) and lowest in rye (-0.66). In conclusion, forage barley and oats showed good productivity in reclaimed land. Adaptability is also different among varieties of forage crops. When growing forage crops in reclaimed land, the selection of highly adaptable species and varieties was recommended.

This study was conducted to investigate the effect of whole crop rice based TMR on the meat quality of Korean Native Cattle (Hanwoo). Sixteen Hanwoo steers (average 8 months old) were divided into the control group (commercially marketed TMR) and the WCR-TMR group (whole crop rice based TMR). Feeding trials were carried out up to 30 months of age, and after slaughter, the strip loin were collected and analyzed for meat quality. There were no significant differences in proximate compositions of Hanwoo (P>0.05), and crude protein, crude fat and crude ash were 19.51∼20.23 %, 11.53∼11.35 % and 1.10∼1.12 %, respectively. There was no significant difference in water holding capacity and cooking loss between treatments (P>0.05), but it was slightly lower in the control group. Among the various functional components in meat, β-carotene was not detected, but α-tocopherol was significantly higher in WCR-TMR group and vitamin A content in control (P<0.05). The a*-value in the meat color index decreased significantly with longer storage period in the control group, whereas the WCR-TMR fed group showed no significant difference (P>0.05) according to the storage period. There were no difference between the treatments in the TBARS (2-Thiobarbituric acid reactive substances) value used as an indicator of lipid oxidation and in fatty acid content. But the control group had high myristic acid content, whereas the WCR-TMR supplemented group showed higher oleic acid and linoleic acid content. In conclusion, feeding of WCR based-TMR increased the α-tocopherol content, which is a functional ingredient in meat, and the other components were not significantly different from the control. Therefore, it was judged that there was no significant difference between WCR based and conventional TMR in meat quality characteristics.

Hay-making is one of the most common way for forage preservation in livestock industry. The quality and production of hay could be affected by various factors. This experiment was conducted to investigate the effect of tedding time and frequency on drying rate and feed value of forage rye (Secale cereale L.) hay. Rye was harvested on heading stage using mower conditioner. Hay was tedded at each set hour(09:00, 13:00 and 17:00) and sampled at each set hour to determine dry matter (DM) content. After two months’ preservation, CP (crude protein), ADF (acid detergent fiber), NDF (neutral detergent fiber), IVDMD (in vitro dry matter digestibility), TDN (total digestible nutrient), RFV (relative feed value), DM loss, visual scores and total fungi count were determined for estimation of hay quality. Tedding was necessary for both speeding up drying rate and improving forage quality. Tedding at 17:00 showed lower NDF content (p<0.05), and also higher RFV value was found compared with tedding at 9:00 and 13:00 (p<0.05). On the other hand, it was observed that more DM losses would be found when tedding later (p<0.05). Tedding in 1~3 times per day were lower in ADF and NDF content (p<0.05), increased CP, TDN and RFV (p<0.05), got less DM loss (p<0.05), and contained less fungi during conservation compared with no tedding (p<0.05). On the other hand, tedding too frequent caused more DM loss (p<0.05). In conclusion, for shorter drying process and higher quality of forage rye hay, tedding at 13:00∼17:00 for 1∼2 times per day was recommended in this study.

This experiment was conducted to investigate the effect of whole crop rice (WCR) based TMR on growth performance and carcass characteristics of Hanwoo steers. WCR “Yeongwoo”was harvested at yellow ripen stage and ensiled for 60 days. The crude protein (CP), acid detergent fiber (ADF), neutral detergent fiber (NDF), in vitro dry matter digestibility (IVDMD) and total digestible nutrient (TDN) content was 8.4 %, 28.0 %, 53.8 %, 72.4 % and 66.8 %, respectively. For silage quality, pH was 4.37 and lactic and butyric acid content were 2.84 and 0.04 % in DM. Sixteen Hanwoo steers (8-mon-old) were allocated into either a control (commercial TMR) and WCR-TMR (WCR-based TMR) group. The TMR were fed according to the feeding stage phase: growing (Initiate∼14 month), early fattening (15 month∼21 month) and late fattening (22 month∼30 month). The body weight of control group increased (P<0.05) until early fattening stage, but late growing stage of WCR-TMR group was higher than that of control (P<0.05). Average daily gain (ADG) was significantly greater (P<0.05) in WCR-TMR group (total 0.78 kg/head) compared to control (total 0.66 kg/head) except for late fattening stage. The marketing weight and carcass weight were higher in WCR-TMR group (726 vs 765 kg; 417.8 vs 450.4 kg). The back fat thickness (11.75 vs 13.00 mm), Longissimus dorsi area (88.00 vs 89.88 ㎠) and yield index (65.87 vs 64.30) were not different between the two groups (P>0.05) and also no difference in meat yield grade (A : B : C = 2 : 4 : 2). Marbling score (4.00 vs 4.13), meat color (4.75 vs 4.75), fat color (3.13 vs 2.88), texture (1.25 vs 1.50) and maturity (2.00 vs 2.00) were not significant difference between the two groups and meat quality grade (1++:1+:1:2:3=0:2:4:2:0) was also not different. In conclusion, TMR feeding based on WCR silage showed superiority in carcass yield and ADG compared to control TMR. It is considered that the use of WCR for feed is a necessary option for the substitution of the imported forages and the government's policy for rice production adjustment.

This experiment was carried out to study the change of productivity and feed value in different types of hilly pasture. The pasture utilized in the experiment was placed on the experimental farm of Pyeongchang Campus of Seoul National University. Forage production type(FP; Orchardgrass 18 + Tall Fescue 12 + Timothy 5 + White clover 5 kg/ha) and Public farm type(PF: Orchardgrass 12 + Tall Fescue 18 + Timothy 5 + White clover 5 kg/ha) pasture were established in September 3, 2014 and utilized (cutting or grazing) four times every year. Growth characteristics, yield and forage quality were investigated for two years. Plant height of grasses was the highest in the 1st cutting and legumes was in the 2nd cutting. Dry matter (DM) content was highest at every the 1st cut grasses significantly lower at the 2nd harvest (p<0.05). However, there was no significant difference in the 2nd, 3rd and 4th harvest in 2016. In the botanical composition change, the portion of legume was gradually increased after pasture establishment and the ratio of weed and bare land was higher at 2nd and 3rd cutting, but it was decreased at 4th harvest. There was no significant difference in 2016 of fresh yield between two farm types (p>0.05). The yield of dry matter showed similar trend of fresh yield and forage production type was higher than that of public farm type (p<0.05). The forage intake by livestock was 1,452 kg/ha in 2015 and 1,743 kg/ha in 2016. Pasture utilization ratio of public farm type pasture was highest in the 3rd grazing time. Forage quality of pasture in relation to management type had not significant difference, but there was difference in harvest times. Crude protein (CP) was the lowest in the 1st harvest and total digestible nutrient (TDN) was highest in the 1st harvest and lowest in the 4th harvest. Based on the above results, it is found that the establishment of pasture suitable for farm’s situation is important for set up of Korean model of hilly pasture. Although the forage production type is superior on forage productivity, it is recommended that the results will be provided as basic data for management of public farm type in the future.

본 연구는 평창지역의 산지에서 목초 파종시기가 초지의 연차별 식생 및 생산성에 미치는 영향을 구명하고 평창지역의 산지초지 조성에 적합한 피종시기를 설정하고자 2015년 8월부터 2017년 10월까지 평창군에 위치한 서울대학교 국제농업기술대학원의 산지에서 수행되었다. 처리는 총 4처리로 T1: 8월 13일 파종 T2: 8월 27일 파종, T3: 9월 10일 파종, T4: 9월 24일 파종이었다. 월동 후 초지 식생구성을 보면 T1과 T2까지는 목초 식생비율이 98%이상으로 높은 식생밀도를 보였지만 T3이후부터는 급격하게 감소하였다. 분얼의 경우 T1과 T2에서 4.4개 이상으로 양호하였지만 T3이후에는 급격하게 감소하였다. 이러한 초기 월동률의 차이는 이후 목초의 식생 및 생산성에 큰 영향을 주었다. 연차별 식생변화를 보면 T1과 T2의 경우 목초 비율이 81%이상으로 우수하였지만 T4의 경우 상대적으로 불량하였다. 전체 건물 수량의 경우 T2와 T1이 각각 9,042 kg ha-1 와 8,845 kg-1 로 우수하게 나타났지만 T4의 경우 5,086 kg ha-1 로 건물 생산성이 상대적으로 낮게 나타났다. 결과를 종합해보면 평창지역에서 8월 말까지 파종을 완료 한 경우 목초 월동이 향상되었으며 이는 식생이나 생산성 측면에서 유리하게 나타났다.

본 시험은 남부지역 논에서 사료용 벼와 월동작물은 연계하여 연간 생산성을 비교하기 위하여 수행하였다. 사료용 벼는 국립식량과학원에서 육성된 수원 605호, 영우, 목우 품종을 이용하였으며 월동작물로 호밀(곡우), IRG(그린팜) 그리고 트리티케일(조성)을 이용하였다. 각각의 작물은 표준재배법을 이용하여 재배하였으며 사료용 벼의 수확은 품종별로 출수 약 30일후에 실시하였다. 월동사료작물의 초장은 호밀이 가장 컸으며 파종시기가 늦어짐에 따라 커지는 것으로 나타났다. 건물함량은 이탈리안라이그라스가 가장 낮았으며 트리티케일이 평균 29.4%로 가장 높았다. 건물 수량은 호밀이 가장 높았으며 이탈리안라이그라스와 트리티케일은 유의적인 차이가 없었다. 사료가치는 파종시기에 따른 차이는 없었으나 초종간에는 차이가 있었다. 특히 호밀은 다른 초종에 비해 CP, IVDMD, TDN 및 RFV 수치가 낮게 나타났다. 사료용 벼 출수기는 수원 605호가 가장 빨랐으며 목우가 가장 늦었다. 건물함량은 목우가 유의적으로 낮게 나타났으나 건물생산량은 평균 18,484kg/ha로 품종간의 유의적인 차이는 없었다. 사료가치에 있어는 목우의 조단백질 함량이 유의적으로 낮게 나타났으며 TDN 및 RFV 값은 목우가 가장 높았다. 연간 생산성 평가에 있어서는 호밀-수원 605호가 86,741kg/ha로 가장 높은 생초수량을 나타내었으며 건물수량도 26,515kg/ha로 가장 높았다. 트리티케일과 IRG도 수원 605와의 작부체계시 건물 및 TDN 생산성이 높았다. 이상의 결과를 종합하여 볼 때 남부지역에서의 사료용 벼를 이용한 연중 사료작물 생산체계시 수원 605호와 호밀 (곡우) 조합이 가장 우수한 것으로 판단되었다.

In this experiment comparison was made for the agronomic characteristics and quality of forage rye among the different growing stages. Rye was harvested every 5 days, then separated into three parts and determined the quality. Before harvesting, plant height and yield were recorded. Dry matter yield increased continuously, while fresh matter yield decreased after heading. ADF and NDF value increased before blooming and then showed a slight fluctuate. In addition, highest CP content appeared on jointing stage. TDN and RFV went down until blooming stage and then showed a steady trend. So the proper harvest time is from heading to blooming stage for forage rye.

This study was conducted to explore the effects of seeding rate of a seed mixture on grassland productivity and botanical composition. Seeding rates were composed of four different treatments varying by the amount of seed: T1, 50% decrease in seeding rate from standard; T2, standard seeding rate; T3, 50% increase in seeding rate from standard; and T4, 100% increase in seeding rate from standard. In 2016, seasonal changes in grass botanical composition revealed T2, T3, and T4 in portion of grass ratio were the highest with a range of 87–100%, whereas T1 was the lowest of all treatments. In 2017, the botanical composition in T1 showed that the grass ratio in of the first cutting was 91%, but in the fourth cutting its ratio decreased by 75%. The results from both years were combined for each treatment, T4 (11,435 kg ha-1) and T3 (11,162 kg ha-1) demonstrated the highest dry matter yield of the treatments (T1: 8,196 kg ha-1; T2: 9,521 kg ha-1) (p＜0.05). As a result, a 50–100% increase in the seeding rate from the standard demonstrated the best grassland yield and botanical composition.

This experiment was carried out to determine the effect of organic fertilizer and seed mixture on productivity, botanical composition and forage quality in middle areas(Geumsan, 250m sea level) pasture. Total six experimental pastures (orchardgrass, timothy and tall fescue based seed mixture and with or without organic fertilizer) were established in autumn, 2014 and evaluated productivity and agronomic characteristics from 2015 to 2016. Plant heigh was higher in orchardgrass based mixture and orchardgrass and tall fescue based mixture were higher in 2nd harvest. There was not found the significant difference among treatment(P<0.05) in dry matter (DM) content. Botanical composition in 1st harvest was higher weed portion in orchardgrass based mixture and legumes was disappeared at 3rd harvest in all treatments. Fresh and dry matter yield was higher in 2nd year than 1st year. In 1st year, orchardgrass based mixture with organic fertilizer plot was the highest(P<0.05) DM yield, but tall fescue based mixture with organic fertilizer was the highest in 2nd year. Content of crude protein (CP) was the highest in tall fescue based mixture and Timothy based mixture showed low in ADF (acid detergent fiber) and NDF (neutral detergent fiber) content. But the content if in virto dry matter digestibility was higher than others. In 2nd year, the nutritive value of 2nd and 4th harvested grasses were higher and average RFV (relative feed value) value was the highest at 4th harvest. According to this result, orchardgrass and tall fescue based mixture would be recommendable for farm who considering productivity and timothy based mixture would be recommendable for considering forage quality in middle areas of Korea.

Hay-making is one of the most common forage preservation practices in livestock operations. The objective of hay-making is to minimize nutrient loss by shortening field drying time. Measuring the impacts of cutting height of forage crop is necessary to optimize hay production balancing yield and quality, in order to obtain substantial biomass increase through harvest of regrowth. This experiment was conducted to investigate the impact of cutting height of rye (Secale cereale L.) on drying rate and hay quality. Heading stage rye was harvested at 8cm or 15cm stubble heights. Hay was daily tedded at 09:00 and sampled at 09:00, 13:00 and 17:00 to determine moisture content (MC). After two month of preservation, CP (crude protein), ADF (acid detergent fiber), NDF (neutral detergent fiber), IVDMD (in vitro dry matter disappearance), TDN (total digestible nutrient), RFV (relative feed value), DM (dry matter) loss, visual scores and total fungi count were determined for estimation of hay quality. Cutting height at 15cm could enhance the drying rate and CP content (p<0.05), but also increases DM loss (p<0.05) compared to cutting at 8cm. Cutting heights did not affect ADF, NDF, IVDMD, TDN and RFV value (p>0.05). Visual scores of rye hays cutting at 8cm and 15cm, ranged from 83 to 85. Cutting at 8cm tended to maintain higher core bale temperature and fungal count than cutting at 15cm during preservation, but there was no significant difference.

This experiment was conducted to comparison study on the productivity for certified varieties of import adaptability of silage corn in Pyeongchang area. Total eight varieties (Gangpyeongok, 31N27, 32P75, 32W86, P3156, P3394, DK 689 및 DK 729) were evaluated. The experimental design was 8 treatment of randomized block with three replications. Corn varieties were cultivated in experimental field of Pyeongchang campus, SNU from 1 May to 2 September, 2015 and plot size was 15㎡. Plant height of 32W86 and ear height of Gwanpyeongok was the highest (p<0.05). Tasseling and silking date was 27 July-3 August and silking occurred after 1-3 day of tasseling. Average day to silking was 92 days and that of 31N27 variety was short (p<0.05). The varieties of DeKalbo Company (DK 689 and DK 729) required more times to silking. Average GDD (growth degree day) of eight varieties was 1,023℃ and P3352 was the lowest GDD. In the trials of resistance evaluation, P3394 was strong in disease, P3156 was the highest in insect. All varieties did not show the lodging and variety of DK 729 showed the highest stay green score (p<0.05). Average dry matter content was 30.77%, it showed higher trend in DM. 32W86 was the highest DM content among the varieties, but there was no significant difference among varieties (p>0.05). The weight per ear was the highest in 32W86 and the lowest in Gwanpyeongok. The ration of ear to whole plant was higher in 32W86 and P3394, but it was not found the significant difference (p>0.05). Average yield of fresh and DM was 59,017 and 13,476 kg/ha, respectively. DK 689 showed higher DM and TDN yield than others, but there was not significant difference (p>0.05). According to results, the difference of productivity was not found among certified variety of import adaptability of silage corn. The varieties Gwanpyeongok, 32W86 and 32P75 would be recommendable in Pyeongchang area for stable cultivation.

This study was conducted to find out the effects of over seeding using new grass varieties orchardgrass ‘Kordione’ and ‘Onnuri’, and tall fescue ‘Greenmaster’ on botanical composition and dry matter productivity from 2013 to 2016 in low productivity hilly pasture, middle area of Korea. There were used 3 grass seed mixture types made of different compositions and amounts {T1: control - no over seeding, T2: tall fescue (TF) ‘Greenmaster’ 18 kg ha-1, orchardgrass (OG) ‘Kordione’ 9 kg ha-1, Perennial ryegrass (PRG) ‘Linn’ 5 kg ha-1, and Kentucky bluegrass (KBG) ‘Kenblue’ 2 kg ha-1, T3: TF ‘Greenmaster’ 9 kg ha-1, OG ‘Kordione’ 18 kg ha-1, PRG ‘Linn’ 5 kg ha-1, and KBG ‘ Kenblue’ 2 kg ha-1, T4: TF ‘Greenmaster’ 9 kg ha-1, OG ‘Onnuri’ 18 kg ha-1, PRG ‘Linn’ 5 kg ha-1, and KBG ‘Kenblue’ 2 kg ha-1}. In the botanical composition of grassland, T1 nearly remained constant in other seasons while ratio of weeds were increased in summer season. T2 was better than control (T1) in portion of grass ratio, which has increased by 80%. In the early time of establishment, the portions of OG were increased in T2, but TF rate was increased after 3 years later when grass was established. T3 and T4 showed a very similar patterns, grass ratio had increased by 80% and the portion of KBG had increased as time passed. T2 (129,763 kg ha-1) was showed the highest dry matter yield than other treatments (T1: 6,756 kg ha-1, T3: 9641, and T4: 10,738) in 2016.

The objective of this study was to determine the effect of the moisture content and pellet mill type on the physical and chemical characteristics of Italian ryegrass (IRG) pellet. Moisture content of raw material significantly (p<0.05) affected IRG pellet formation. Moisture content at 25% was the best condition for IRG pellet formation in terms of shape, power load and temperature changes. The hardness of pellet was decreased when moisture content was increase. However, the hardness of pellet was not affected by pellet mill type. Moisture content at 30% dramatically (p<0.05) decreased the durability compared to moisture content at 25%. Dry matter content of IRG pellet was increased (p<0.05) after pelleting. Total count of microorganism was decreased in pellet due to pressure heat and moisture losses during the pelleting process. These results indicated that the proper moisture content of Italian ryegrass pelleting would be at 25%. In addition, Roll & flat die type would be more suitable than Ring die and Die & flat die type in IRG pelleting. Pelleting works would be beneficial for improving forage quality and long storage.

This study amied to determine the effect of species and seed mixture on productivity, botanical composition and forage quality in middle mountainous region (Geosan) pasture. Total seven experimental pastures (T1 : Orchardgrass, T2 : Timothy, T3 : Tall fescue, T4 : Perennial ryegrass, T5 : Kentucky bluegrass, T6 : Timothy + Orchardgrass + Tall fescue + Alfalfa, T7 : Timothy + Orchardgrass + Kentucky bluegrass + White clover) were established in autumn, 2014 and evaluated for productivity and agronomic characteristics for 2015. Plant heigh was high in Orchardgrass and Perennial ryegrass pasture. Dry matter (DM) content was high in Kentucky bluegrass. Botanical composition in 1st harvest was high in shrub, but the grass composition was high in 2nd and 3rd harvest. Fresh and DM yield were higher in Orchardgrass and Perennial ryegrass (p<0.05); whreras, Kentucky bluegrass was the lowest. In seed mixture pasture, yields of T6 plot (Tall fescue) were higher than those of T7 (Kentucky bluegrass). Average CP (crude protein) content of 2nd and 3rd cutting time was 16.91 and 14.79%, respectively and Kentucky blue grass was the highest in 3rd cutting time by 17.57%. IVDMD (in vitro dry matter digestibility) showed low in 1st cutting and Kentucky bluegrass was the lowest in every cutting time. TDN (total digestible nutrient) content was the highest in 3rd cutting and the lowest in 1st cutting. These results indicated that Orchardgrass, Perennial ryegrass and T6 are recommendable for productivity and Timothy, Perennial ryegrass and T7 are recommendable for forage quality.

This study was conducted to find out the effects of Improvement of Botanical Composition Technology (IBCT) on the forage production and ecological characteristics in a Rumex acetosella-dominated hilly pasture in Pyeongchang, in a period from August 2013 to the end of growing season in October 2015. 2MT ha－1 limestone was applied in August 2013 and April 2014. Liming significantly increased soil pH from 4.69 to 5.47 and then the soil pH consistently hovered at 4.91~4.98. For every grazing time, plant height was found to be higher with the application of IBCT as compared with the control. After grazing, no significant difference in plant height was found between the IBCT group and the control. Changes in the botanical composition of grassland can be affected by a lot of circumstances, but application of IBCT decreased Rumex acetosella from 12% to 2%, while also increasing the proportion of pasture. In relation to the botanical composition of grass, orchardgrass and timothy showed the highest percentages throughout the whole study period. The proportion of Kentucky bluegrass increased over time while tall fescue steadily decreased. The totals for grazing days were 58 in 2014 and 55 in 2015. Average herbage dry matter intake was 7,848 kg ha－1 in 2014 and 6,941 kg ha－1 in 2015. Due to the application of IBCT, dry matter productivity showed a significant increase of 59% during the first grazing period in 2014 (3,437 kg ha and 5,460 kg ha in control and IBCT). In 2015, the total dry matter yield of the IBCT group was 51% greater than the control (5,742 kg ha－1 and 8,685 kg ha－1 in control and IBCT). Under acidic soil conditions, red sorrel can grow more strongly than grasses because it has better tolerance in dry and acidic conditions. Therefore, constant management is required in order to keep red sorrel from dominating the hilly pasture. In this study, the application of IBCT was able to effectively control weeds at all points. As a result, total management, including improvement of soil, overseeding, and application of selective herbicide and fertilizer, is needed to maintain excellent grassland conditions due to the limiting effects of environmental factors on grassland productivity.

The objective of this study was to determine the effect of moisture content on the physical and chemical characteristics of Italian ryegrass cube. Cube quality according to moisture contents (15, 20, 25, and 30%) was determined. Cubes made with 15 to 20% moisture showed a little cracks. But, the amount of powder generate from these cubes were lower by 10 to 16% compared to other cubes made with 25 to 30% moisture contents. The highest hardness at 159 kg/f was obtained when the cube was made with 15% moisture content and the lowest was 70 kg/f when the cube was made with 30% moisture content. The electrical loading and surface temperature were increased when moisture content was decreased. The chemical compositions of cube were differ from those of raw materials. Crude protein (CP) and ether extract (EE) contents were increased after cubing works. However, crude fiber (CF), acid detergent fiber (ADF), and neutral detergent fiber (NDF) contents were decreased after cubing. The crude ash content was not significantly (p > 0.05) different between raw material and cube. Higher moisture content resulted in higher crude protein content. However, crude fiber and crude ash content were not significantly (p > 0.05) different between each other. The contents of ADF and NDF were the lowest in cubes made with 30% moisture content. Our results suggest that the proper moisture content of Italian ryegrass cubing is recommended to be 15 to 20% and that cubing works should help increase forage quality.

수확시 숙기와 조제방법이 호밀 라운드베일 사일리지의 건물 손실률과 형태변화에 대한 영향을 구명하기 위하여 3 가지 시험을 수행하였다. 호밀은 3번의 생육단계에 맞춰 수확하였으며 (수잉기, 출수기 및 개화기) i) 예건 (비예건,단기예건, 장기예건)에 따른 변화, ii) 유산균첨가제 (무처리, 첨가제 A 및 첨가제 B) 처리에 따른 변화, iii) 비닐색 (백 색, 흑색, 녹색)에 따른 변화를 관찰하였다. 수잉기 및 비예 건 처리구에서 저장 2개월 후의 형태 변화가 심하게 나타 났다. 그러나 출수기 이후의 수확 처리구에서는 변화정도 가 심하지 않았다. 첨가제 처리는 사일리지의 형태변화와 건물 손실률을 감소시켰다. 건물 손실률은 수확이 지연되 거나 첨가제 처리로 유의적으로 감소되었다. 수잉기 처리 에서는 형태변화가 심하게 관찰이 되었는데 첨가제 처리구 가 비 처리구보다 형태변화가 더 심하게 일어났다. 흑색비 닐 처리는 다른 비닐색에 비해 형태변화가 심하게 일어났 으나 건물 손실률은 비닐색에 따른 차이가 없었다. 상관관 계에서는 수확시 숙기와 예건기간이 형태변화와 정의 상관 이 있는 것으로 나타났다. 이상의 결과를 종합하여 볼 때 건물함량은 사일리지의 형태변화에 영향을 주는 가장 큰 요인으로 나타났다.