경상분지 신동층군의 백악기 진주층 일부 사암에서 산출되는 흑색의 불투명 탄화수소인 고열역청(pyrobitumen) 의 산상을 처음으로 보고한다. 고열역청은 녹니석 공극벽 선충진(pore-lining) 교결물을 피복하거나 교결물 끝부분에 스 며들어간 상태로 산출되므로, 녹니석 교결물 침전 이후에 생성된 것이며, 이는 과거 원유가 존재했음을 지시한다. 액상 의 탄화수소는 진주층이 상당한 깊이로 매몰되는 동안 유입되었으며, 진주층 사암은 저류암의 역할을 했던 것으로 보인 다. 진주층에 고열역청이 존재하는 것은 진주층이 액상 탄화수소의 이동 이후 심부 매몰과정을 겪었음을 지시한다. 그 후 매몰 온도가 더 증가하면서 탄화수소의 열분해가 일어나고 고열역청이 저류암에 잔류물로 남게 되었다.

Paspalum distichum and P. distichum var. indutum are perennial weeds of the family Poaceae that prefer moist environments such as waterfronts and waterways. The origin of both species is North America. P. distichum is distributed all over the world. However, P. distichum var. indutum occurs only in the United States, Japan, and Korea. For this reason, in many countries, P. distichum and P. distichum var. indutum are classified as the same species. In other words, P. distichum var. indutum is a different ecological type of P. distichum. Both species can reproduce and spread mainly by rhizome fragments rather than seeds. This rhizome has a characteristic that it does not germinate if it is buried in the ground with depth of more than 3 cm. As a management method for P. distichum and P. distichum var. indutum in agricultural lands (paddy fields), it is effective to combine cultural control and chemical control methods. In other words, combining deep plowing and harrowing can suppress the budding of water sparrow that has invaded paddy fields or fallow paddy fields. After that, these two species that germinate can be controlled by spraying soil treatment herbicides such as butachlor and thiobencarb or foliar treatment herbicides such as cyhalofop-butyl and fenoxaprop-pethyl.

Lactuca scariola L. is one of ecosystem-disturbance plants that grow everywhere such as roadsides, grasslands, railroads, banks, and fields. L. scariola usually occurs in autumn. It overwinters in rosette form. It flowers and produces seeds in early summer of the next year. Seeds of L. scariola can germinate immediately without dormancy when the temperature is over 20°C. Due to endogenous bacteria in seeds of L. scariola, it has a strong drought tolerance. Thus, it can grow well on roadsides. L. scariola should be controlled as it can result in 60-80% of soybean yield loss at densities above 50 plants m-2. It is advisable to remove L. scariola as it competes with native plants by acting as a pioneer to other ecosystem-disturbance plants. Among various control methods, chemical control is the most effective method that is widely used. Soil treatment with herbicides such as oxyfluorfen EC and pendimethalin EC can inhibit the development of L. scariola. Foliar treatment herbicides glyphosate and glufosinateammonium are widely used. L. scariola is resistant to 2,4-D, dicamba, and MCPA among foliar treatment herbicides. Thus, it is recommended to apply herbicides with different modes of action.

송대 금속공예는 仿古銅器와 金銀器라는 두 가지 축을 중심으로 발전해왔다. 방고동기 는 예제개혁과 회복을 통한 권력강화를 위해 황실 주도 하의 진행된 금속공예였다. 북송의 방고동기는 휘종대에 집중적으로 제작되었고, 상대 고동기의 기형과 서주 고동기의 명문을 적용하였으며, 부분 주조 후 접합하는 방식으로 제작하였다. 남송대 방고동기는 紹興, 紹熙 연간에 주로 제작되었고, 宣和博古圖를 바탕으로 淳熙釋尊制度圖, 紹熙州縣釋奠儀 圖와 같은 예서를 활용하여 새로운 경향의 방고동기를 만들었다. 송대의 금은기는 재질의 희소성에도 불구하고 사용이 보편화 되었는데, 東京夢華錄등 의 기록을 통해 확인할 수 있다. 송대 금은기 사용의 보편화는 시장경제의 활성화를 의미하 는 것으로 금은기 소유는 제한적이지만, 사용은 영업장을 방문한 사람은 누구나 할 수 있었 다. 송대 금은기는 협층법과 거푸집 단조 등 전대와는 다른 기법으로 제작하기도 하였는데, 협층법은 기형의 중후함과 내부를 매끄럽게 만들어 사용이 편리하였고, 거푸집 단조는 동일 기형을 대량생산 할 수 있는 장점이 있다. 문양 표현에서는 화훼문과 인물고사 등이 주요 문 양으로 등장하였고, 타출기법으로 문양을 강조하기도 하였다. 송대 방고동기와 금은기는 재질과 기형, 문양에서 차이를 보이지만, 금은으로 방고동기를 만들고 고동기의 문양을 금은기에 적용한 것은 당시 금은기에도 방고동기의 영향이 있었다는것을 보여주는 것이다. 송대 금속공예의 두 가지 축인 방고동기와 금은기의 소유는 황실과 관료 등의 지배층에 국한되었지만, 소비와 사용은 다른 양상을 보인다. 방고동기의 사용은 황실과 관료 등 지배 층에 국한되었지만, 금은기는 영업점에서 누구나 사용할 수 있었던 공예품이었던 것이다. 송 대 방고동기와 금은기는 역할의 차이가 있었지만, 황실에서 민간으로 그리고 상품화로 다양 하게 변화하는 모습을 잘 보여준 송대의 금속공예의 두 가지 축이었다.

In this paper, to improve the optical quality of aspherical plastic lenses for mobile use, the optimal molding conditions that can minimize the phase difference are derived using injection molding simulation, design of experiments, and machine learning. First, factors affecting the phase difference were derived using the design of the experiment method, and a data set was created using the derived factors, followed by the machine learning process. After predicting the model trained using the generated training data as test data and verifying it with the performance evaluation index, the model with the best predictive performance was the random forest model. Therefore, to derive the optimal molding conditions, random forests were used to predict 10,000 random pieces of data. As a result of applying the derived optimal molding conditions to the injection molding simulation, the phase difference of the lens could be reduced by 8.2%.

Recently, 3D printing has been actively studied. A representative material in this 3D printing technology is plastic, and PLA, an eco-friendly material, is widely used. FDM is widely used as a way to output these PLA materials. However, this method lacks mechanical properties compared to injection-molded products as it is a method of stacking materials by melting. Therefore, in this study, using an FDM-type 3D printer, a tensile test was performed after printing a tensile specimen with PLA filament with the layer angle and layer density as control factors. After that, changes in tensile properties according to the layer angle and density were compared and evaluated. As a result, to improve the tensile strength, the layer density had to be considered, and to improve the elastic modulus, both the layer angle and the layer density had to be considered.

Beta-titanium alloys are used in many industries due to their increased elongation resulting from their BCC structure and low modulus of elasticity. However, there are many limitations to their use due to the high cost of betastabilizer elements. In this study, biocompatible Ti-Mo-Fe beta titanium alloys are designed by replacing costly betastabilizer elements (e.g., Nb, Zr, or Ta) with inexpensive Mo and Fe elements. Additionally, Ti-Mo-Fe alloys designed with different Fe contents are fabricated using powder metallurgy. Fe is a strong, biocompatible beta-stabilizer element and a low-cost alloying element. The mechanical properties of the Ti-Mo-Fe metastable beta titanium alloys are analyzed in relation to the microstructural changes. When the Fe content increases, the tensile strength and elongation decrease due to brittle fracture despite a decreasing pore fraction. It is confirmed that the hardness and tensile strength of Ti-5Mo-2Fe P/M improve to more than 360 Hv and 900 MPa, respectively.

본 연구에서는 하수 재이용을 위한 역삼투막 공정에서 전처리 정밀여과막(MF) 손상에 대한 누출되는 다양한 수 질변화로써 막 손상 검지 방안을 제시하였다. 이를 위하여 역삼투막 유입수질 적합성 평가지표인 SDI (silt density index)를 3에서 5의 범위 내에서 막 손상 시 검지 감도를 정량화하기 위하여 전처리 분리막이 1에서 3가닥 파단에 따라 SDI는 1.92에 서 6.11까지 증가한 결과를 확인할 수 있었다. 일반적으로 3을 기준으로 역삼투막 유입수질로 설정하였을 때 분리막이 3가닥 까지 파단이 되어야만 막 손상 검지가 가능하다는 것을 의미하며 역삼투막의 오염은 잠재적으로 가속화되어 효율을 저하시 킬 수 있다. 또한 이때 누출되는 입자성과 유기물질에 대하여 0.45 μm 이상의 크기만 걸러주는 입자계수는 입도분포별 막 파 단 개수에 따라 일정한 패턴을 확인할 수 없었으며, TOC 농도는 약 2배의 변화패턴으로써 SDI와의 상관관계로써 TOC가 막 손상 수질지표로써 신뢰성이 높은 것으로 확인되었다. 수질분석결과와 더불어 USEPA에서 제시하는 막 손상 검지 방법 중 압력손실시험과 이를 기반으로 LRVDIT 모델의 적합성 평가를 한 결과 막 손상 또는 역삼투막 공정으로 유입되는 막오염물질 을 신속하게 확인할 수 있는 SDI 및 TOC를 포함한 LRVDIT 모니터링과 UCL 설정을 병행해야 한다.

To isolate aerobically and identify the diversity of halophilic bacteria in the soil around two ports, Daepopogu and Hwasun Port, on Jeju island, a total 46 halophilic bacteria strains were isolated and phylogenetically analysed. The isolated strains were divided into 3 phyla, 8 families, 16 genera and 23 species. The main taxa was the Bacilli class, which included 50.0% of the strains with 3 families, 10 genera and 15 species of Bacillaceae, Exiguobacterium_f and Planococcaceae. The second taxa was the Gammaproteobacteria class, which included 45.7% of the strains with 4 families, 5 genera and 7 species of Aeromonadaceae, Halomonadaceae, Marinobacteraceae and Vibrionaceae. The isolated strains were tested for hydrolytic enzymes, amylase, lipase and protease activity, and 31 strains showed activity of at least one enzyme. Furthermore, auxin activity was determined in 7 strains. This study showed that the isolated strains have possible applications in the food and agricultural industries and have importance as a genetic resource in Korea.

This research studied faults that may occur during slow charging using the J1772 adapter of Tesla Model-3 electric vehicles. When the AC terminal was instantaneously disconnected, charging was performed normally when an AC circuit with disconnection up to three disconnection times was connected. Charging control was suspended when the number of disconnection reached four times. However, if the AC disconnection time exceeded 22 seconds, the charging control was stopped regardless of the number of disconnection. When a contact failure occurred at the AC terminal, high surge current and noise occurred. However, when the contact improved, the charging control continued. In terms of safety, it seems necessary to take measures such as stopping charging control when detecting noise.

This study aimed to examine cucumber (Cucumis sativus) varieties adaptive to the desert climate by comparing and analyzing the growth, yield, and water consumption. Two long-sized cucumber varieties, ‘Gulfstream’ and ‘Imea’ and two medium-sized cucumbers, ‘Nagene’ and ‘Sausan’ were cultivated in coir substrate hydroponics under hot and humid greenhouse conditions from March 2 to June 20, 2020. On the 113 DAT, ‘Nagene’ had the longest plant height and the highest internode number. The marketable fruit number per plant was higher in the medium-sized varieties, which had more internode number. The marketable fruit number was 31.3 for ‘Gulfstream’, 30.7 for ‘Imea’, 57.8 for ‘Nagene’, or 56.0 for ‘Sausan’ with no significant difference in total fruit weights per plant. The water consumption required to produce 200 g of fruit was lower in the ‘Nagene’ (2.39 L) with the highest water use efficiency (WUE). Therefore, ‘Nagene’ variety may have higher adaptability to desert high temperature compared to the long-sized varieties, and it is going to be necessary to verify more medium-sized cucumber varieties.