Wolsong unit 1, the first PHWR (Pressurized Heavy Water Reactor) in Korea, was permanent shut down in 2019. In Korea, according to the Nuclear Safety Act, the FDP (Final Decommissioning Plan) must be submitted within 5 years of permanent shutdown. According to NSSC Notice, the types, volumes, and radioactivity of solid radioactive wastes should be included in FDP chapter 9, Radioactive Waste Management, Therefore, in this study, activation assessment and waste classification of the End shield, which is a major activation component, were conducted. MCNP and ORIGEN-S computer codes were used for the activation assessment of the End shield. Radioactive waste levels were classified according to the cooling period of 0 to 20 years in consideration of the actual start of decommissioning. The End shield consists of Lattice tube, Shielding ball, Sleeve insert, Calandria tube shielding sleeve, and Embedment Ring. Among the components composed for each fuel channel, the neutron flux was calculated for the components whose level was not predicted by preliminary activation assessment, by dividing them into three channel regions: central channel, inter channel, and outer channel. In the case of the shielding ball, the neutron flux was calculated in the area up to 10 cm close to the core and other parts to check the decrease in neutron flux with the distance from the core. The neutron flux calculations showed that the highest neutron flux was calculated at the Sleeve insert, the component closest to the fuel channel. It was found that the neutron flux decreased by about 1/10 to 1/20 as the distance from the core increased by 20 cm. The outer channel was found to have about 30% of the neutron flux of the center channel. It was found that no change in radioactive waste level due to decay occurred during the 0 to 20 years cooling period. In this study, activation assessment and waste classification of End Shield in Wolsong unit 1 was conducted. The results of this study can be used as a basis for the preparation of the FDP for the Wolsong unit 1.

본 연구는 절화용 튤립(Tulipa spp.) 4품종을 대상으로 재 식밀도에 따른 생장과 발육 특성을 알아보고 광이용효율을 분 석하여 우리나라에서 튤립 촉성재배시 필요한 기초자료를 얻 고자 실시되었다. 절화용 튤립 ‘Novi Sun’, ‘Timeless’, ‘Il de France’, ‘Dow Jones’ 4품종을 대상으로 구근용 재배 상자 (가로×세로×높이; 60cm×40cm×20cm)에 상자당 48, 70, 96개의 구근을 정식하여 저온처리 이후 비닐하우스로 운반되 었다. 그 결과, ‘Novi Sun’과 ‘Timeless’는 온실 이식 이후 35 일 만에 수확되었으며 ‘Il de France’와 ‘Dow Jones’는 그보 다 빠른 30일 만에 수확되었다. 모든 품종에서 재식밀도가 증 가할수록 생체중, 줄기 직경, 엽면적이 감소하였다. 정상개화 율은 96bulbs/box 처리에서 특히‘Novi Sun’ 32.7%과 ‘Timeless’ 4.7%로 감소하였으며 이 두 품종에서 줄기와 꽃의 건물중이 크게 감소하는 것으로 나타났다. 광이용 효율과 밀접 한 지표인 엽면적지수는 재식밀도가 높아질수록 증가하였다. 광합성 효율은 ‘Novi Sun’과 ‘Timeless’의 경우 저광도에서 재식밀도에 따라 큰 차이가 없는 것으로 나타났다. 엽면적 감 소와 형태적인 변화가 작은 ‘Il de France’과 ‘Dow Jones’에 서 광합성 효율이 크게 변화하였다. 재식밀도에 따라 다양한 생육 반응은 유사한 경향은 있으나 품종에 따라 광합성 효율과 동화산물의 분배가 크게 달라지는 것으로 나타났다. 튤립 촉성 재배 시 정상적인 꽃의 발달과 생육 확보를 위해서는 충분한 재식 간격을 확보할 수 있는 재식밀도로 정식해야 한다.

This research studied the electrical characteristics, IR transmission characteristics, stealth functions, and thermal characteristics of infrared thermal-imaging cameras of copper-sputtered samples. Nylon samples were prepared for each density as a base material for copper-sputtering treatment. Copper-sputtered NFi, NM1, NM2, NM3, NM4, and NM5, showed electrical resistance of 0.8, 445.7, 80.7, 29.7, 0.3, and 2.2 Ω, respectively, all of which are very low values; for the mesh sample, the lower the density, the lower the electrical resistance. Measuring the IR transmittance showed that the infrared transmittance of the copper-sputtered samples was significantly reduced compared to the untreated sample. Compared to the untreated samples, the transmittance went from 92.0–64.1%. When copper sputtered surface was directed to the IR irradiator, the IR transmittance went from 73.5 to 43.8%. As the density of the sample increased, the transmittance tended to decreased. After the infrared thermal imaging, the absolute values of △R, △G, and △B of the copper phase increased from 2 to 167, 98 to 192, and 7 to 118, respectively, and the closer the density of the sample (NM5→NFi), the larger the absolute value. This proves that the dense copper phase-up sample has a stealth effect on the infrared thermal imaging camera. It is believed that the copper-sputtered nylon samples produced in this study have applications in multifunctional uniforms, bio-signal detection sensors, stage costumes, etc.

This study was designed to evaluate antihyperglycemic and antihyperlipidemic effects of ethanol extracts of Taraxacum mongolicum (T.m.) on streptozotocin (STZ)-induced diabetic rats. Sprague-Dawley rats were randomly assigned to five groups: normal (NC), STZ-control (DC), and three experimental groups. Diabetes was induced in Sprague-Dawley rats with a single intravenous injection [45 mg/kg body weight (b.w.)] of STZ. An ethanol extract of T.m. was orally given to diabetic rats for 14 days. Three experimental groups were additionally treated with T.m. extract at doses of 1 g/kg b.w./day for T.m.-1, 2 g/kg b.w./day for T.m.-2, and 3 g/kg b.w./day for T.m.-3. Oral administration of T.m.-2 significantly increased their body weights. T.m.-1 and T.m.-2 significantly decreased aspartate aminotransferase (AST) levels than DC. T.m.-1 and T.m.-2 group significantly decreased blood glucose levels. Total cholesterol, triglycerides, and free fatty acids were significantly decreased whereas high-density lipoprotein cholesterol was significantly increased in groups treated with T.m. extract than those in the DC group. These results support the fact that administration of T.m. extract can reduce hyperglycemia and hyperlipidemia risk in diabetic rats.

Suncheon Bay Ecological Park, possessing abundant fisheries and biological diversity, was registered as a Ramsar wetland in Korea. Approximately 300 bacterial strains were isolated from the Suncheon Bay in a comprehensive study of indigenous prokaryotic species conducted during 2019-2020 in South Korea. A total of 12 bacterial strains were identified using 16S rRNA gene sequencing, demonstrating >98.7% sequence similarity with validly published species. These species were determined to be unrecorded bacterial species in Korea. A total of six strains were isolated from brackish water and Phragmites communis Trin (reed) species. These unrecorded species were phylogenetically diverse and belonged to three classes, six orders, and ten genera. Regarding the genus and class levels, the previously unrecorded species belonged to Jiella, Martelella, Rhizobium, Paracoccus, Rhodovulum, and Altererythrobacter of the class Alphaproteobacteria; Mycolicibacterium, Demequina, and Microbacterium of the class Actinobacteria; Confluentibacter of the class Flavobacteria. The twelve species were further characterized by gram staining, colony and cell morphology, biochemical properties, and phylogenetic position.

Diabetic encephalopathy is a major complication with cognitive impairment and neurodegeneration in patients with type 1 or type 2 diabetes mellitus (DM). DM-induced glucolipotoxicity is a risk factor for Alzheimer’s disease–like phenotype, including amyloidogenesis, tau hyperphosphorylation, and neuronal apoptosis. Although the detailed mechanism underlying the pathogenesis of diabetic encephalopathy remains unclear, mitochondrial oxidative stress is emerging as a key factor for diabetic complications and neurodegeneration. A deeper understanding of the regulatory mechanism of mitochondrial oxidative stress under hyperglycemic conditions will provide insights into the development of therapeutic strategies for diabetic encephalopathy. Here, we review the role of mitochondrial oxidative stress in diabetic encephalopathy and the regulatory mechanisms by which high glucose induces the generation of mitochondrial reactive species oxygen species in neuronal cells. This review also summarizes the mitochondrial-dependent and -independent pathways (O-linked-N-acetylglucosaminylation, calcium, and glycogen synthase kinase 3β signaling) that regulate mitochondrial oxidative stress in a DM model.

Anderson-type polyoxometalate (POM) with general formula of [Hy(XO6)M6O18]n- (y=0-6, n=2-8, M=addenda atom, X=heteroatom) represents one of the basic topological structures among POM-type family. Anderson-type POMs have a planar arrangement and two terminal oxygen atoms attached to each addenda metal atom unlike other type. Thus, the Anderson-type POMs have high reactivity and various coordination modes. The various multifunctional organic-inorganic hybrid materials can be synthesized using the Anderson-type POMs as an inorganic building block. Another important feature of the Anderson-type POMs is the incorporation of the heteroatoms with various sizes and oxidation states, which can lead to tune chemical properties. No Anderson-type POMs with early transition metal ions in the heteroatom site have been reported previously. Recently, we reported the synthesis of titanium-containing Anderson-type POM, Na2K6Ti0.92W6.08O24∙12H2O (Ti-POM), which consists of pure inorganic framework built from a central Ti atom surrounded by six WO6 inorganic scaffold. Herein, in-depth studies were conducted to find optimal synthesis conditions such as composition and pH. The success of synthesis was confirmed with Powder X-ray Diffraction that the Ti-POM has a rhombohedral structure with space group of R-3m (No. 166) when the TiOSO4·xH2SO4∙yH2O/ Na2WO4∙2H2O molar ratio is in the range of 0.07 to 0.33. But outside of this range, other unwanted phases coexist. In a basic condition (pH=12), a single-phase Ti-POM with good crystallinity can be obtained, while a Keggin-type POM, NaxK10-x(H2W12O42), was formed through the decomposition of Ti-POM at pH lower than 7.