This study focused on the development of Fe–Co/kaolin catalyst by a wet impregnation method. Response surface methodology was used to study the influence of operating variables such as drying temperature, drying time, mass of support and stirring speed on the yield of the catalyst. The catalyst composite at best synthesis conditions was then calcined in an oven at varied temperature and time using 22 factorial design of experiment. The catalyst with optimum surface area was then utilized to grow carbon nanofiber (CNF) in a chemical vapour deposition (CVD) reactor. Both the catalyst and CNF were characterized using high-resolution scanning electron microscopy, high-resolution transmission electron microscopy, thermogravimetric analysis (TGA), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy. On the influence of operating variables on the yield of catalyst, the results showed that an optimum yield of 96.51% catalyst was obtained at the following operating conditions: drying time (10 h), drying temperature (110 °C), stirring speed (100 rpm) and mass of support (9 g). Statistical analysis revealed the existence of significant interactive effects of the variables on the yield of the catalyst. The HRSEM/XRD/BET/TGA analysis revealed that the particles are well dispersed on the support, with high surface area (376.5 m2/g) and thermally stable (330.88 °C). The influence of operating parameters on the yield of CNF was also investigated and the results revealed an optimum yield of 348% CNF at the following operating conditions: reaction temperature (600 °C), reaction time (40 min), argon flow rate (1416 mL/min) and acetylene/hydrogen flow rate (1416 mL/ min). It was found from statistical analysis that the reaction temperature and acetylene/hydrogen flow rates exerted significant effect on the CNF yield than the other factors. The contour and surface plots bi-factor interaction indicated functional relationship between the response and the experimental factors. The characterization results showed that the synthesized CNF is thermally stable, twisted and highly crystalline and contain surface functional groups. It can be inferred from the results of various analyses that the developed catalyst is suitable for CNF growth in a CVD reactor.

By analyzing the status of Korean tire labeling regulation and comparing the performance indicators of tire labeling in different countries, this paper expounds the serious impact of tire noise on traffic noise pollution, and puts forward that in order to improve the comfort of car ride, control traffic noise pollution and build a green tire industry, the tire labeling system should be improved, and the corresponding requirements for tire rolling noise should be put forward according to the road conditions in Korea.

The study on the tire noise due to the On-Board Sound Intensity test method. The object of this project is to prepare the countermeasure of the noise reduction according to collect tire/road noise data under various influencing factors by using On-Board Sound Intensity test method. To accomplish the object ; A automotive is used as a test platform to test tire/road noise by changing different types of tires and using On-Board Sound Intensity test system. The influence of inflation pressure, road, load, speed and pattern type on tire/road noise is compared and analyzed. At the same time, the mechanism of tire/road noise is analyzed, which provides a experimental basis for tire noise reduction.

We present the analysis of KMT-2016-BLG-0212, a low flux-variation (Iflux−var ∼ 20 mag) microlensing event, which is in a high-cadence (Γ = 4hr −1) field of the three-telescope Korea Microlensing Telescope Network (KMTNet) survey. The event shows a short anomaly that is incompletely covered due to the brief visibility intervals that characterize the early microlensing season when the anomaly occurred. We show that the data are consistent with two classes of solutions, characterized respectively by low-mass brown-dwarf (q = 0.037) and sub-Neptune (q < 10−4) companions. Future high-resolution imaging should easily distinguish between these solutions.

To preserve the superior genetic resources and restore the endangered species, Somatic cell nuclear transfer (SCNT) has been used widely. In Korea, the research of dog cloning has made outstanding achievements including the production of the world`s first cloned dog. Sapsaree (Sapsalgae), the representative dog of Gyeongsan-si was designated as a Korea natural monument (No. 368). This male dog used in this study has azoospermia due to unknown cause. In this study, the aim was to confirm the cause of infertility in the cell donor dog and to evaluate the reproduction potential of dog cloning using infertile male dog by SCNT. First, to confirm the infertility of the cell donor dog, the reproductive history and the testis were evaluated. The breeding histology was not recorded in individual document. In histopathology, the Sertoli cell tumor was confirmed in biopsy of the cell donor dog after death. But, these tumors are predominantly in older dogs. Second, we produced the cloned dogs with the somatic cells of the infertile dog and the appearance was similar with the cell donor dog. Also, microsatellite analysis confirmed the genetic relationship between the cell donor and clone dogs. Third, the potential breeding capacity of the cloned dog was confirmed. In T4 assay, the normal dog (same age with cloned dogs), cell donor dog, and cloned dogs was investigated. The cell donor dog with azoospermia had very low T4 level, and cloned dogs showed higher level of T4 than normal dogs. In CASA, There was no significant difference in sperm motor ability between normal dogs and cloned dogs. As a result, cloned dogs produced by SCNT had no problem regarding the reproductive function of the testis. In AI experiment, the semen of clone dogs was used to fertilize a natural female bitch and was diagnosed pregnancy by ultrasonography. In total, 7 puppies were born by normal delivery (male: 3, female: 4). In conclusion, this study confirmed that the reproduction problem of non-genetic infertility can generate a normal descendant by SCNT. Also, the first successful research to restore infertile dogs was completed. Furthermore, SCNT would be useful for the restoration of endangered species and application of superior traits.