산업기술의 비약적인 발전으로 인해 오늘날 우리가 개발하거나 사용하는 시스템은 보다 기술의 고도화 양상을 보이고 있다. 따라서, 기존의 시스템이 지니고 있어 제공하는 단일 특성에서 벗어나 다양한 학제간 결합된 기술로 기존 시스템이 지니고 있는 관념적인 기능에서 벗어나 다기능을 제공하고 있다. 이로 인해, 기존의 개발단계에서는 보다 높은 설계 신뢰성이 요구되고 있다. 특히, 오늘날 우리사회는 시스템의 개발성공이라는 안도에서 벗어나 시스템 운용·유지단계에서도 안전성 측면에서 매우 중요성을 인식하고 대비하고 있다. 따라서, 국내에서는 미흡한 상위 단계에서의 설계활동과 또한, 같은 시스템 수명주기 상에서의 시스템 안전활동을 동시에 고려한 동시공학적인 접근에 관한 연구를 본 연구팀은 지속적으로 수행해왔다. 따라서, 기존의 연구결과인 설계와 안전을 동시에 고려한 통합 설계 프로세스 모델에 대해, 시스템개발에 관련한 모든 이해당사자가 공통된 이해를 바탕으로 시스템설계와 안전 활동에 대해 상호 호완성과 공통된 인식을 갖고 접근할 수 있는 방안을 본 연구를 통해 수행하였다. 따라서, 본 연구는 모델기반 시스템공학 기법중 보편적인 언어인 공통 언어를 통해 기존 연구를 통해 제시한 통합설계 프로세스 모델을 구현에 관한 연구 수행을 통한 접근 방안에 관하여 논의하고 있다. 본 연구를 기반으로 향후 추가 연구를 수행한다면, 국내 대형복합시스템의 설계단계에서의 안전성을 동시 고려한 시스템 설계 신뢰성 확보를 위해 도움이 될 것으로 기대 된다.

오늘날 자동차 기술의 비약적인 발전으로, 단순히 이동수단으로만 여겨왔던 자동차 는 과거와는 비교 할 수 없을 정도의 안전성과 편의성을 제공하고 있다. 이러한 편의 와 안전을 제공하는데 있어서의 핵심은 전자제어 장치의 발달로 이뤄진 결과이다. 최 근 개발되는 전자제어 장치는 통합 모듈제어의 형태를 지니고 있어서 설계의 복잡성 을 지니고 있다. 따라서 이러한 특성으로부터 발생되는 문제를 기존에 준수해왔던 IEC 61508으로는 해결하지 못해, ISO 26262가 제정되었다. 따라서, ISO 26262의 국내 도입 에 따른 발생되는 문제들이 예측되고 있다. 이러한 문제에 대한 분석을 통해, 모델 기 반 시스템공학 적용을 통해 해결하고자 노력하였다. ISO 26262의 국내 적용에 따른 가장 유려되는 개발 전체 라이프사이클에 안전성과 신뢰성을 만족하기 위한 개발 프 로세스 도입에 대한 문제와 요구사항 분석 및 개발, 그리고 관리 측면에 대해 시스템 공학 전산지원도구 활용을 통한 모델기반 시스템 공학 접근 방법을 활용한 방안에 관 하여 논의하고 있다. 본 연구 결과를 기반으로 향후 추가 연구를 수행하면, ISO26262 의 국내 자동차산업 도입에 따른 문제에 해결하기 위한 과정에 도움이 될 것으로 기 대된다.

지하 동굴식 처분장의 건설, 운영 및 중-저준위 방사성폐기물을 처분한 이후 발생하게 되는 오염물질(Rn, CH CO, HS, Radiolysis에 의한 방사능 가스 등)은 적절한 공기량을 필요로 한 곳에 정확히 분배시킬 수 있는 환기시스템에 의해 통제되도록 하여야한다. 특히 지하 처분장은 여러 개의 진입 터널, 저장 터널, 공기 유입-배기 터널, 수직갱 등으로 이루어진 복잡한 회로망의 형태로 나타나기 때문에 이에 적절한 기술적 접근이 필요하다. 본 논문에서는 이러한 환기시스템 구축을 위한 기술적 접근을 위해 미국의 WIPP (Waste Isolation Pilot Plant)처분장과 스웨덴의 SFR (Slutforvar for Reaktoravfall) 중-저준위 처분장을 모델로 하여 두 처분장의 소요환기량을 선정하고 설계상 통풍로의 단면적, 길이, 표면 거칠기 등을 고려한 환기회로를 구성하였으며, 수학적으로 계산되는 각 회로의 저항에 대해 기술하였다. 또한 이를 바탕으로 적절한 선풍기의 용량과 수직갱 운용방안을 설계하였다. 두 처분장의 지형상의 규모 및 환기시설 비교 결과, SFR 처분장에 비해 WIPP 처분장에서와 같이 병렬구조가 많을수록 처분장 전체의 저항이 감소되며 이러한 결과로 환기시스템의 운용비 절감효과를 얻을 수 있다는 결론을 얻었다. 따라서 처분용량 증대를 위한 대단면의 SFR 처분장 구조와 전체 저항 감소를 위한 WIPP 처분장의 병렬구조를 조합한 형태가 가장 합리적이며 효율적인 환기가 이루어질 수 있을 것으로 사료된다.

Short pitch fibers were prepared from petroleum based isotropic precursor pitch by melt-blown technology. The pitch fibers were stabilized in oxidizing condition, followed by steam activations at various conditions. The fiber surface and pore structures of the activated carbon fibers (ACFs) were respectively characterized by using SEM and applying BET theory from nitrogen adsorption at 77 K. The weight loss of the oxidized fiber was proportional to activation temperature and activation time, independently. The adsorption isotherms of the nitrogen on the ACFs were constructed and analyzed to be as Type I consisting of micropores mainly. The specific surface area of the ACFs proportionally increased with the weight loss at a given activation temperature. The specific surface area was ranged 850~1900 m2/g with pores of narrow distribution in sizes. The average pore size was ranged 5.8~14.1 a with the larger value from the more severe activation condition.

Petroleum based isotropic pitch was spun into short fiber by melt-blown spinning technology. The processing parameters chosen were air velocity, die temperature, and throughput rate of the pitch within the ranges of experimental tolerances. The fiber diameter was reduced to 6μm by increases of hot air velocity, and spin die temperature. Also, the fiber diameter was strongly dependent on the throughput rate of the pitch and jet speed of hot air through the spinnerets. Even fibers with 10μm diameter were produced at throughput rate of 0.17g/min·hole and at die temperature of 290℃.

A petroleum-based isotropic pitch fiber spun by melt-blown method was oxidized in air flow at various conditions. The oxidized pitch fiber obtained was tested for its infusibility and its elemental composition during the process of stabilization. The structural changes were traced by using solvent solubility, FT-IR spectroscopy, and elemental analysis. The samples showed a gradual increase in weight with increasing the oxidization temperature. The weight gain of sample oxidized at 320℃ for 10 min was about 4.5%. The concentration of the pyridine and toluene soluble fraction decreased with an increase in stabilization temperatures. The oxygen uptaken in the stabilization process converted aliphatic side chains into the carbonyl groups. As stabilization proceeded, the more ether and carboxylic acid groups were formed through the oxidations of aldehyde and primary alcohol, and then the carboxylic acid was dehydrated to be aromatic anhydride.

This paper introduces a Feedback Linearization (FL) controller to eliminate the gyro effect on a quadrotor UAV. In order to control the attitude of the quadrotor, the second model equation was differentiated to the 4-th order to induce the control input to be revealed, and then a new control input was derived based on the attitude transformation equation with a gyro effect. For the initial quick posture control of the quadrotor, the existing yaw control was replaced with a separate controller. The simulation was conducted with an experiment in which FL control to remove the gyro effect was applied to the quadrotor and an experiment without removing the gyro effect, from the experimental results, the maximum error seen in each axial direction of the quadrotor was x = 0.22 m, y = 0.20 m, z = 0.16 m. Through the proposed method, the effect of the FL controller for controlling the gyro effect of the quadrotor was confirmed.

본 논문은, 시설물안전법의 적용을 받지 않아 안전사각 지대에 놓여 있는 중소규모 교량들의 유지관리 전략 수립시 기초자료로 활용할 수 있는, 중소규모 교량 성능평가 우선순위 결정 방안을 제시하기 위해 실시하였다. 이를 위해 취약도와 영향도를 기반으로 하는 위험도 지수를 산출하고, 산출된 위험도 지수에 따라 이들 교량들을 성능평가 즉시실시교량, 단기실시교량 및 관찰교량으로 구분하여 제안하고, 실제 공용중에 있는 중소규모 교량에 적용하여 제안한 방안의 현장 적용성을 확인하였다. 연구결과, 여기서 제시된 방안은 향후 중소규모 교량의 유지관리 전략 수립에 적절히 활용되어 중소규모교량 사고 방지 및 유지관리 예산절감에 기여할 수 있을 것으로 판단되었다.

Pumpkin has long been used as traditional health materials in oriental medicine, pharmacy, medicine, and food industries in many countries. In this study, the water extract and two active components from tendril of young C. moschata Duch. were investigated on inflammation inhibitory activity. The water extract of young C. moschata Duch. showed high cell viability over 95% and it decreased the production of interlukin 6 (IL-6) and tumor necrosis factor (TNF-α) in the capacity of mouse bone marrow-derived macrophages (BMDM) upon lipopolysaccharide (LPS) stimulation. Also, isolated fraction (B4) suppressed the secretion of IL-6 and TNF-α. Among the domestically cultivated pumpkins, B4 fraction contained in the tendril part of them and it comprised of the order of tendril from Cucurbita pepo var. cylindrica, old of C. moschata Duch., and young of C. moschata Duch. These results suggest that water extracts of C. moschata Duch. and purified active compound, rutin, show anti-inflammation activity by suppression of the secretion of IL-6 and TNF-α. It can be applicable as pharmaceutical materials.

산업발달로 인한 화석 연료의 급격한 사용으로 기후변화와 연료고갈 문제가 대두되고 있어 폐기물자원화 및 신재생에너지에 대한 관심이 급증하고 있다. 선행되어온 연구들은 바이오매스나 플라스틱의 대체연료 가능성 연구들로 국한되어 진행되었다. 폐플라스틱 필름의 경우 많은 연구가 진행되어 왔으나, 현재 발생되는 폐플라스틱 필름에 관한 연구는 미비한 상황이다. 많은 폐플라스틱 필름의 발생량에 비해 절반정도를 웃도는 재활용처리 비율은 다른 폐플라스틱 필름 처리방안 마련이 필요하다는 점을 시사한다. 열분해를 이용한 오일 및 화학원료 생산에 대한 관심이 높아지고 있다. 따라서 본 연구에서는 폐플라스틱 필름의 물리･화학적 특성 분석 및 열중량분석기를 통한 동역학분석과 파이롤라이저-가스크로마토그래피 /질량분석기를 이용한 반응 생성물 분석하여 폐플라스틱 필름의 열분해 공정 도입 가능성을 추가 확인하고자 한다. 또한 현재 배출되는 폐플라스틱 필름류의 열분해 특성과 어떤 성분이 생성되는지 알아보고 공정설계 기초자료로 활용되고자 폐플라스틱 필름의 열분해 특성연구를 수행하였다.

Non-CO2 온실가스인 염화불화탄소(Chlorofluorocarbons, CFCs)와 수소염화불화탄소(Hydro-Chlorofluorocarbons, HCFCs)는 오직 인류의 경제(산업) 활동에 의해 발생하며 인체에 무해하고 안정한 물질이기 때문에 냉매, 분사제, 발포제 등 여러 분야에서 다양하게 사용되었지만 오존층 파괴물질으로 국제협약인 몬트리올 의정서에 의해 생산과 사용이 규제되었다. 이에 대한 대체물질로써 수소화불화탄소(Hydrofluorocarbons, HFCs)와 과불화탄소(Perfluorinated compounds, PFCs)가 개발되었지만 여전히 높은 지구온난화지수(Global Warming Potential, GWP)를 지닌 것으로 알려져 있다. 또한 국내 HFCs 소비량은 꾸준히 증가하고 있는 추세로 HFCs 중 전기･전자제품 및 자동차에 99% 이상 냉매로 사용되는 HFC-134a(1,1,1,2-Tetrafluouroethane, CH2FCF3)는 물리･화학적으로 안정된 난처리성 물질로써 처리 시 많은 에너지(높은 온도)가 필요하며, 강산으로 알려진 불산(Hydrogen fluoride, HF)의 발생으로 처리시설의 부식을 야기시킨다. 이에 따라 HFC-134a의 안정적이고 효율적인 분해 기술 개발을 위한 연구가 필요하다 사료되며 본 연구는 수직형 관형흐름 반응기를 이용한 촉매열분해를 적용하여 촉매별 HFC-134a 분해효율 연구하고, 각 촉매별 열분해 반응 생성물의 비교를 통해 HFC-134a의 촉매열분해 특성을 알아보고자 하였다.

We examined the effects of light colors (wavelength) and light quantities on the yield ratio and quality of cultivated cowpea sprouts. All light colors resulted in a lower cowpea sprout yield ratio compared to the untreated condition (darkness), but were similar in hard seed ratio. All light colors promoted the growth of the epicotyl and root when compared to the untreated condition, but limited the growth of the hypocotyl. White light (458 nm) significantly improved grade by increasing the lightness of the cotyledon and the hypocotyl and the yellowness of the hypocotyl. The Fe content of cowpea sprouts was higher in those grown under red light (632 nm), and the total amino acid content was higher for those grown under yellow light (560 nm), white light (458 nm), and blue light (460 nm) compared to plants grown in the untreated condition (darkness). The yield ratio of cowpea sprouts was lower in the yellow light condition (560 nm) at lower light quantity, but no differences were observed at other light colors and quantities. The lightness and yellowness of cowpea sprouts was higher in the yellow light (560 nm) and red light (632 nm) at lower light quantity, redness was lower. No significant differences were observed in the content of normal and inorganic components according to the light quantities of each light color, except that Fe content was higher in sprouts grown under red light (632 nm) as light quantity increased. Total amino acid content was slightly higher in sprouts grown under white light (458 nm) and blue light (460 nm) as light quantity increased.

Global increase in energy consumption has been known to cause the depletion of fossil fuels, and results in the increase of coal and oil price. Recently, waste to energy policy has received attention more and more, Korea imports approximately 97% of its total energy consumed, and there is an urgent necessity for the development of alternative energy source. Domestic waste management policy aims at zero waste community, which can be explained as the concept of 4R. The 4R consists of existing 3R (Reduce, Reuse and Recycle) and Recovery policies. Conversion of waste to energy, a form of renewable energy, has been known as an effective alternative for the increasing energy crisis. In this study, waste wood generated in D city was investigated as one of the alternative energy source. Expecially, the conversion of waste wood to solid refuse fuel (SRF) as an energy source was focused on. As an initial step to evaluate the applicability of waste wood as the alternative energy source, the waste wood sample were characterized by a proximate analysis and element and heavy metal contents analyses. In addition, heating values of the waste wood were calculated by presumption equation and Dulong's equation, and measured by bomb calorimeter. In summary, waste wood can be considered as one of the alternatives for effective energy source by meeting Korea standards for the quality and grade of SRF such as in lowheating values, contents of moisture, sulfur, and chlorine, and heavy metal contents

The purpose of this study was to establish the optimal growth temperature and to select genetic resources for production of cowpea sprouts. Seowon was treated between 15°C and 30°C at intervals of 3°C to investigate growth temperature. Twelve resources, including Seowon, IT154149, IT154153, Tvu7426, and Tvu7778, were used for cultivating sprouts at a temperature of 27°C. The yield ratio of cowpea sprouts was highest at 27°C (657%), and was reduced when growth temperature was decreased. The hard seed rate was lower when the growth temperature was increased. Vitamin C content was highest at 24°C (2.85 mg/g), ranged between 2.15 and 2.29 mg/g at other growth temperatures, and increased with the length of the growth period. The inorganic component content of cowpea sprouts did not vary based on growth temperature, while the amino acid content increased with increasing growth temperature between 15°C and 24°C, and then subsequently decreased as growth temperature rose from 24°C to 30°C. IT154153 had the highest yield ratio of cowpea sprouts per genetic resource (647%), followed by Seowon (615%), and Tvu7426 (608%). Genetic resources with a higher yield ratio had smaller seeds, a thinner seed coat, and superior germinability. The inorganic components found at highest concentrations in the cowpea sprouts were potassium, magnesium, calcium, sodium, iron, molybdenum, and zinc (in that order). In comparison to raw seeds, the protein, calcium, zinc, molybdenum, and iron content in the cowpea sprouts was higher, while the content of aluminum and boron was lower.

This research was designed to elucidate the pyrolysis reaction characteristics of waste epoxy printed circuit board (e- PCB). The samples were pulverized after removing coppers by gravity separator. Non-isothermal pyrolysis kinetic results by Thermogravimetric Analyzer (TGA) displayed two apparent reaction regions : 1) fast degradation zone and 2) slow degradation zone. According to batch experiments, solid by-products are responsible for about 78%, while liquid and gas by-products, respectively, represent 13 and 9%. The high content of solid by-products is ascribed to that of SiO2 that is a major components of e-PCB. Liquid by-products exhibit high content of oxygen (19%) and contain the nitrogen of about 1%. It is recommended that gas, liquid, and solid by-products of waste e-PCB would not be applied directly as fuels. Instead, pyrolysis of e-PCB would be applied to recover valuable rare metals and coppers from solid by-products. Application of liquid by-products is likely to be limited due to the presence of brominated oils precursor in liquid byproducts. It is necessary to develop upgrading methods for improving the quality of liquid by-products of waste e-PCB. According to kinetic analysis and product characterization, pyrolysis reaction model of waste e-PCB is accounted for by a series reaction with two independent reactions of two resins: brominated epoxy resins and non-brominated epoxy resins. At the first-stage, two resins are independently decomposed to generate thermally stable intermediates followed by slow degradation of the intermediates to be converted into char.

A series of methanol extracts from leaf and root parts in spring- and winter-barley plants were assayed to determine their allelopathy and antioxidant activity. The methanol extracts applied on filter paper in a Petri-dish significantly inhibited root growth of Chinese milkvetch (Astragalus sinicus L.) seedlings. Leaf extracts at 25 and 50 g L-1 inhibited root growth of Chinese milkvetch seedlings more than root extracts. No difference in phytotoxic effects of spring- and winter-barley seedlings extracts on root growth of Chinese milkvetch was observed. Methanol extracts dose-dependently increased DPPH free radical scavenging activity in vitro. DPPH free radical scavenging activity was higher in the methanol extracts from winter-barley seedlings than in those from spring-barley seedlings, and from leaf extracts than from root extracts. The antioxidant potential of the individual fraction from the methanol extracts of spring-barley seedlings was in order of n-butanol>ethyl acetate>water>chloroform>n-hexane fraction. By means of HPLC analysis, spring-barley (200.62 mg 100g-1 ) had more amount of total phenol acid than winter-barley (114.08 mg 100g-1 ). Especially, ferulic acid was detected in spring-barley extract (183.46 mg 100g-1 ) as the greatest amount. These results suggest that early seedlings of barley plants had potent allelopathy and antioxidant activity, and their activities were differently exhibited depending on plant parts and growing condition.