Gonggeom-ji is designated wetland protected area by the Ministry of Environment of Korea in 2011 because of it’s high biodiversity and historic value. It contains a reservoir, paddy and forest site which has diverse niches for insects. Three transect lines of 50m were designated. Data were collected in May, October, November in 2017 represented as seasons for spring, summer and autumn respectively. Quantitative methods were conducted along each transect line by sweeping and pitfall trap. Based on this study total of 1079 individuals of insect fauna were collected, representing 170 species in 60 families and 8 orders. The highest diversity, richness and evenness index were observed in the forest site in May(4.77, 8.6 and 0.91 respectively) and the highest dominance index was observed in the forest site in November(0.64). The highest similarity index was observed in the reservoir site in May and August(0.519).

상주는 귀농 도시이자 농업 중심 도시로써 농업기술원을 유치할 만큼 생태학적 연구가치가 있는 친환경 도시이다. 특히 경천섬은 낙동강 본류에 있는 상주보 인근에 위치하고 있어 낙동강 생태 환경 연구의 중요 지역 중 하나이다. 하지만, 아직 경천섬에 대한 생물다양성 연구가 부족한 상태이다. 섬과 산지의 생태환경이 다르기 때문에 생물의 다양성도 다를 것이라 간주하고, 경천섬 주변의 생태학적 가치를 재조명할 기초자료를 조사하고자 한다. 이에 경천섬과 인근에 위치한 청룡사 길목 산지에 서식하는 곤충 채집을 통해 생물다양성을 조사하여 비교분석하는 것을 목적으로 한다. 채집방법은 직접잡기, 쓸어잡기, 함정트랩, 흡충관을 이용하였으며, 함정트랩에 사용된 유인제는 소주1.8ℓ와 빙초산350㎖를 혼합하여 사용하였다. 2018년 4월~8월 중 3회 채집과정을 수행하여 목표개체수를 확보하였고, 채집된 곤충은 에탄올을 채운 conical tube에 넣어 냉동실에 보관하여 보존성을 높였다. 채집과정에서 잡은 곤충들을 건조시키고 유사종끼리 분류하고 동정하는 과정을 거쳐 다양도지수, 우점도지수, 종풍부도지수, 종균등도지수, 유사도지수를 계산할 것이다. 기존에 알려지지 않았던 경천섬 일대의 생물다양성을 세세하게 분석하는 과정을 통해 경천섬의 생태학적 가치를 드러내고, 경천섬 일대의 자연환경관리와 보존에 필요한 정보나 체계적인 관리체계를 구축할 기초자료를 제공하고자 한다.

As the demand of fossil fuel has been increased, meeting future will be faced with exhausted non-renewable energy generation. In addition, there is a lot of expectation that fossil fuel resources are expected to get depleted in the end of century. Piezoelectric energy harvesting technology has significant advantages over other renewable energy sources such as solar panel, wind and geothermal energy. By using the pressure of vehicles, the piezoelectric energy transforms to electric energy by deformation of paving materials. There are many studies about this theme, only a few researches have been conducted on-site. It means that piezoelectric harvester is not available for roadway. Therefore, it is necessary to make it better a research framework that is available technology of piezoelectric materials and paving materials. The piezoelectric generator is tested before piezoelectric harvester manufacture for roadway. Each piezoelectric generator produces 9.38[mW/cm²] and piezoelectric harvester is manufactured by the number of 85 the piezoelectric generator. This harvester size has 50*20*9cm3 which is considered for wheel path of vehicle. When the chosen vehicle (about 2 ton) pass this harvester, the amount of electric energy is 255[W/m²] under 2[mm] of deformation and 30[km/h] of velocity. In this situation, the gathered energy is multiplied the maximum of voltage and electric current then divide it for the area of harvester. The test result is the temperature difference between the inside and outside after the thermal insulation coating process. When the external surface temperature is increased to 180 degrees, the internal temperature is kept 80 degrees even after about 30 minutes, indicating that the internal materials are protected from heat. In spite of many advantages with piezoelectric harvesting system, it is very hard to fit between roadway and harvester because of pavement damage. Most of paving material has a strong thickness. In this study, instead of asphalt and concrete pavement, the paving material is compound of poly-urethane to protect rutting and damage. To analysis for behavior, test is conducted by 90,000 times of wheel load on the pavement. The red line on the graph is commonly used asphalt pavement and the green one is polyurethane pavement. As it seemed that polyurethane pavement shows that the depth from wheel load is over 5 times better performance compared with asphalt pavement. Construction design is first of all, cutting off asphalt which is established before, then set up the tenth of piezoelectric harvesters, twenty fourth of road markers is installed into the roadway. Before filling up to space with polyurethane materials, wire arrangement and connect to controller. Each harvester is connected with controller that makes a signal for voltage, temperature sensor, water leak sensor. In order to use electric energy by harvester, road markers are selected, which each harvester has three of road markers. A circuit for lighting the light emitting device using the output of the harvester installed in the rest area was designed and manufactured. Basically, a circuit is configured to light up the harvester output, and a commercial power supply can be used in case the output of the harvester is reduced due to the durability thereof, and a controller is manufactured for each harvester to connect the road markers. Key Words: Piezoelectric Harvester

With advances in digital technology, retailers are utilizing digital signage which would be a visual factor of atmospherics in a retail environment. Based on stimulus-organism-response (S-O-R) model, this study was to examine a moderating effect of digital signage in relationship between atmospherics and store patronage. To collect data, a self-administered questionnaire was developed based on literatures, and mainly contained usage experience of digital signage, atmospherics (20 items), and store patronage (6 items). All items were measured on 7 point rating scale. Two sampling frames for this study were involved: experienced sample from retail stores with digital signage vs. unexperienced sample from retail stores without digital signage. Each sample was separately asked to complete the same questions regarding experience with digital signage, store atmospherics and store patronage. A total 497 usable responses (n=278 for experienced digital signage; n=219 for unexperienced digital signage) were obtained from consumers who were aged from 20 to 49 years old. For experienced sample, digital signage has been used various types: for example, location-based digital screen for store and shopping information (52.5%) was the most experienced, and followed by LED screen (28.8%) and others (e.g., Digital Look-Book, Virtual-Try-on, Interactive Screen, and Self-checking kiosk) in the fashion retail environments. Of total respondents, females (50.7%) were slightly more than were males (49.3%). For data analysis, descriptive statistics, factor analysis, t-test, hierarchy regression analysis were used by using PASW18. Preliminarily, factor analysis revealed that atmospherics consisted of three elements, such as store layout, visual aesthetics and interior display. The factor loadings were ranged from .60 to .80 and three factors were accounted for 70.42% of total variance. Compared with store without digital signage, the mean score of atmospherics (e.g., store layout, visual aesthetics, and interior display) was more highly rated in the retail stores with digital signage. In a hierarchical multiple regression model, two factors of store layout and interior display had a significant effect on store patronage in the first step (F=69.23, p<.001, Adjusted R2=.29). The store layout (β=.33, p<.001) and interior display (β=.17, p<.01) were likely to increase consumers’ store patronage. Also, interaction effect of digital signage and atmospherics was significant in the second step (R2 Change=.014, F Change=3.386, df1=3, df2=487, p<.05). Digital signage had moderating effect only in the relationship between interior display and store patronage (β=.65, p<.05). The findings suggest that digital signage plays an important role as a stimulus in improving atmospherics at the retail environments. Particularly, the digital signage would be effective in a good interior display including POP signs, product display, racks and cases, furniture, which can lead to store patronage. This study provides a managerial implication into retailers for improving atmospherics by utilizing retail technology inside a store. Especially for fashion retailers, it is required to combine digital technology service with in-store visual merchandising for a retail environment.

This study is carried out to know the insect diversity at Gonggeomji wetland in Sangju city where the first designated as a rice paddy wetland protection area from Ministry of Environment of Korea. As the results, 330 species of 234 genera belonging to 90 families in 10 orders were collected and a total of 1,327 individuals were surveyed in this study. Among them, highest collection ratio was 54. 3% (162 species) of Coleoptera, next order was 22% (66 species) of Hemiptera. In seasonal variation, 28 species were surveyed in the first quarter, 81 in the second, 78 in the third, and 87 in the fourth. Ancylopus pictus asiaticus in Coleoptera, Nysius (Nysius) plebejus in Hemiptera were the most dominant species. As a diversity analyses, species diversity index (H'), dominance index(DI), species richness index and evenness index (EI) were provided in here.

The more the marketplace become competitive, the more clear and distinct market segments the marketers need to identify. A minority of consumers takes important roles in the marketplace as market influencers or diffusers of information to others, for instance, market maven or opinion leaders. Market mavens tend to have overall market-related knowledge, while opinion leader and fashion leader possess product class-specific information. Fashion leaders are more likely to adopt a product at the early stage, but opinion leaders or market mavens are not necessary. Despite significant roles as reference groups, limited research has examined the differences in the essential traits of three influential groups. The purpose of this research is to examine and compare the differences of psychological attributes in market maven, opinion leaders, and fashion leaders with respect to consumer self-confidence, clothing involvement(INV), status consumption(STATUS), and price consciousness(PRICE). The instrument was modified based on the previous studies(Bearden, et al., 2001; Clark & Goldsmith, 2005; Feick& Price, 1987;Goldsmith, et al., 1991) and each item was measured by seven-point Liker type scales. A total of 857 data were collected through the internet survey method. About 50.3% of respondents were female, 39.2% were single, and age ranged from 20 to 59 years old. Exploratory factor analysis confirmed the differences of the measurement in three influential groups, explaining 70.76% of variances. Consumer self-confidence was generated into five factors, information acquisition & consideration-set formation (IA&CF), personal outcomes(PO), social outcomes (SO), persuasion knowledge(PKN), and marketplace interfaces(MI). Cronbach's alpha was ranged between .78 and .93. In order to investigate the effects of psychological attributes on three influential groups, five factors of self-confidence (IA&CF, PO, SO, PKN, and MI), INV, STATUS, and PRICE were entered as the independent variables in the regression model respectively. In explaining market maven, IA&CF(β=.37) and SO(β=.35) showed the strong positive effects, and STATUS, PKN(-), MI(-), and PRICE were also significant in order (F=107, adj. R2=.498). Opinion leaders were significantly related with SO(β=.84), and PO, INV, and PRICE presented the minor effects(F=496.2, adj. R2=.822). SO(β=.38), STATUS(β=.37), INV(β=.34), and PKN were significant predictors for fashion leaders (F=289.3, adj. R2=.729). When analyzing the influence of market maven, opinion leader, and fashion leader on buying behaviors, market maven and fashion leaders were significantly, positively related with impulse buying behavior (F=69.28, adj. R2=.193), and overall satisfaction(F=38.21, adj. R2=.115). The implications were discussed.

A xylan-decomposing Gram-positive bacterium, Cellulosimicrobium cellulans DY-8, was isolated from the gut of a wood-feeding longicorn beetle, Moechotypa diphysis. To amplify a partial fragment of the GH 10 β-1,4- xylanase (XylC) gene of strain DY-8, two degenerated oligonucleotide primers were designed based on strictly conserved regions (WDVVNE and ITELLDV) in the GH family 10 xylanolytic enzymes. The full gene (1488-bp) of XylC, which was predicted to encode a protein consisting of 495 amino acids with a molecular mass of 52.0 kDa and a calculated pI of 6.49, was cloned by repeated DNA walking and nested PCR protocols. The results of a protein blast survey showed that XylC was a β -1,4-xylanase comprised of an N-terminal catalytic GH10 domain (from Ser48 to Leu338) and a C-terminal RICIN domain (from Tyr359 to Leu492). This overall structure of XylC was 57% identical to that of Actinoplanes sp. SE50/110 β -1,4-xylanase (Accession number: YP_006265966), which has not yet been biochemically characterized.

A xylanolytic microorganism, strain DY-7, was isolated from the gut of the mole cricket, Gryllotalpa orientalis. The result of phylogenetic analysis based on its 16S rDNA sequence revealed that the isolate was a Gram-positive bacterium belonging to the genus Streptomyces. The cloned gene (1350-bp) encoding a GH family 10 β -1,4-xylanase (XylA) from Streptomyces sp. strain DY-7 was overexpressed in Escherichia coli BL21 and its gene products were characterized. The hydrolysis activities of rXylA and rXylAΔCBD II against xylosidic materials were maximum at pH 5.5 and 65oC. However, deletion of CBD II in the C-terminus region of XylA significantly increased the thermal stability of the enzyme at high temperatures above 50oC. The xylanolytic activity of rXylA was slightly enhanced in the presence of 1 mM Mn2+ and 5 mM sodium azide but it was completely inactivated by 1 mM Hg2+ and 5 mM N-bromosuccinimide. rXylA was capable of efficiently decomposing various xylosidic compounds, PNP-cellobioside, and PNP-xylopyranoside, whereas other hexose-based compounds were insensitive to the enzyme. The specific activities of rXylA toward oat spelts xylan and PNP-cellobioside were 649.8 U/mg and 328.1 U/mg, respectively. Enzymatic degradation of birchwood xylan and xylooligosaccharides (xylotriose to xylohexaose) resulted in the production of xylobiose (>75%) as the main hydrolysis product together with a small amount (4%<) of xylose as the final hydrolysis product.

Bumblebees are widely used to pollinate various greenhouse crops. Among the different bumblebee species, Bombus ignitus is indigenous to Korea, China, Japan and Russia. B. ignitus undergoes one generation per year, and artificial hibernation is essential for year-round rearing of the bumblebee. Keeping the queens under low-temperature conditions for several months is an effective method for terminating their diapause and promoting colony development. In the present study, we investigated how cold temperature affects the artificial hibernation of B. ignitus queens. Under chilling temperatures of -2.5°C, 0°C, 2.5°C and 5°C with constant humidity >80%, the queens stored at 2.5°C exhibited the highest survival rates, which were 74.0% at one month, 67.0% at two months, 60.0% at three months, 46.0% at 4 months, 33.0% at 5 months and 24.0% at 6 months. Lower survival rates were observed at 0°C, 5°C, 7.5°C and 12.5°C. At 2.5°C the colony developmental characteristics after diapause were 1.2- to 1.5-fold greater than those when queens were stored at 5°C. Thus, 2.5°C and 70% R.H. were the most favorable chilling temperature and humidity conditions for terminating the diapause of B. ignitus queens.