Based on the study of chloride migration coefficient and hydration heat evolution, it was found that the use of ternary blended cement was effective to achieve desired service life and minimum crack index. On the other hand, a high level of compressive strength is required for marine concrete mix design.

This paper provides Shear Performance Evaluation of Squat Shear Wall on Aspect Ratio of Slit. The main variables of paper were vertical slit and slit length. Slit height analysis results by lengthening the slit height was reduced according to the strength and stiffness, the maximum displacement was increased.

This paper addresses failure modes of steel fiber coupling beams containing steel fiber. It shows that steel fiber of coupling beams efficiently controlled increase of crack width by bridge action.

In this study is experiment result of steel fiber reinforced concrete shear walls with deformation capacity and structural performance. To assess the deformation capacity and structural performance of shear walls, slits and steel fiber was used as a variables. The experimental results show that steel fiber reinforced concrete shear wall is superior compared to normal reinforced concrete shear wall. The experimental results of shear wall with slits is too.

This paper addresses analysis using vector2 program of steel fiber coupling beams containing steel fiber. It shows that steel fiber of coupling beams efficiently controlled increase of crack width by bridge action.

In this study, to Assess the impact resistant performance of steel fiber reinforced concrete(SFRC), SFRC panels with different thickness impacted by spherical object. As a result, impact resistant perfirmance is increased when the thickness and SFRC increased in

In this study, to Assess the Structural performance of Reinforced Concrete Shear Wall with different Slit Length. Variable of analysis is slit length(0, 600, 1200, 1500, 2400mm), showed excellent accuracy. Maximum load is decreased when the slit length increased. But Side sway of maximum load is increased when the slit length increased.

This experimental study investigates the influence on the tensile behavior of strain-hardening cement composite (SHCC) with HR and SWP Shrinkage Reducing Admixture (SRA). SRA can also improve the tensile strength and multiple cracks of SHCC material used in this study.

This experimental study investigates the influence on the flexural behavior of strain-hardening cement composite (SHCC) with HR and SWP Shrinkage Reducing Admixture (SRA). SRA can also improve flexural strengths and flexural toughness.

The effects of maximum aggregate size on mechanical properties of high-strength steel fiber reinforced concrete (SFRC) were investigated in this work. Test main variable is maximum aggregate size (8 and 20mm). The cylinder specimens was casted for compressive test and the prism specimens was tested under four points loading. Test results indicated that the addition of steel fiber improves compressive and flexural behavior of high-strength concrete. Also smaller aggregate size improve mechanical properties of high fiber volume fraction SFRC.

In this study is experiment result of steel fiber reinforced concrete panel with damage characteristics. To assess the damage characteristics of SFRC panel, aggregate size and steel fiber was used as a variables. The experimental results show that steel fiber reinforced concrete panel is superior compared to normal reinforced concrete panel on area loss rate and weight loss rate. The experimental results of concrete panel with aggregate size 8mm is superior than 20mm.

This study was carried out to evaluate effects of curing method and age on compressive behavior of steel fiber reinforced Alkali-Activated Slag(AAS) concrete. AAS and Steel Fiber Reinforced Concrete (SFRC) material with specific compressive strength of 30MPa was reinforced with 0% to 1% steel fibers at the volume fraction. Two types of curing methods were used: water curing and exposed curing. Curing time is 3, 7, 28 day. Experimental results indicated that compressive strength, elastic modulus, compression index.

The purpose of this study is to estimate basic mechanical properties of steel fiber reinforced Alkali-Activated Slag(AAS) concrete. Principle variable is the fiber volume fraction: 0, 0.5, 1%. Two type cement composites were used: Steel Fiber Reinforced Concrete(SFRC) and AAS. Mechanical properties of AAS concrete and SFRC, including compressive strength, elastic modulus, flexural strength, splitting tension.

The objective of this study is to investigated the compressive characteristics properties used cement paste containing 20% fly ash with curing days.

This paper describes an experimental program to investigate the shear behavior of insulated concrete sandwich panels (CSPs) with different types of GFRP shear connector. The study included testing of 13 insulated CSP specimens with two types of surface conditions for extruded polystyrene (XPS) insulation and various shapes of shear connectors. All specimens were loaded in direct shear by means of push-out and were consist of three concrete panels, two insulation layer and four rows of GFRP shear connectors. Load-relative slip between concrete panel and insulation response of CSP specimens has been established through push-out shear test. Test results indicate that the surface condition of insulation has a significant effect on the bond strength between concrete panel and insulation. The specimen used XPS foam with 10mm deep slot shows higher bond strength than those used XPS foam with meshed surface. Corrugated GFRP shear connectors show equivalent strength to grid GFRP shear connectors. Cross-sectional area and embedded length of shear connector have a notable effect on overall response and inplane shear strength of the CSP specimens.

Diagonally reinforced concrete coupling beam has complicated reinforcement details. To solve this problem, it is necessary to develop the alternative reinforcement details. The objective of this study is to investigate strain characteristics of coupled shear wall according to the replacement ratio of headed-bar.

In this study is experiment result of reinforced concrete squat shear walls with deformation capacity and structural strengthening performance. In order to evaluate the seismic performance of squat shear walls, slits with opening was used as a variables. The experimental results show that ductility capacity of reinforced concrete squat shear wall with slits is superior compared to normal reinforced concrete squat shear wall

This study is performed to analytic evaluate of precast infill wall with vertical slit. As a result, CON-SS specimen shows more ductile behavior than CON-N specimen. Analytical results are compared with experimental results.

This paper describes the flexural performance of concrete and strain-hardening cement based composite (SHCC) beams reinforced with normal and high-strength steel bar to evaluate the effect of reinforcing bar strength and cement composite type. The present investigation shows the potential of high-strength structure materials used of high-strength reinforcing bars with SHCC. And superior mitigation of crack-damage is observed reinforced SHCC beams than reinforced concrete beams

The objective of this study is to investigate the influence of PVA Fiber on flexural yielding coupling beam. Test variable of this study is material type of coupling beam. Test results showed that coupling beam with PVA material experienced multiple micro craks.