It is essential to select materials with excellent mechanical properties to prevent chemical and mechanical damage to the surfaces of materials used in machines and structures and to extend their lifespan. Co-based stellite alloy, which has wear resistance, heat resistance, and corrosion resistance, is essential for products used in harsh environments. However, due to the problem of enormous costs, research on hard facing, which uses a stellite coating layer only on the contact surface, is urgently required. Currently, high-facing research on Stellite coating layers is focused on powder, and GMAW research using wire is relatively lacking. In this study, welding experiments were performed to form stable weld beads using stellite 6 welding wire, and the correlation between parameters and weld beads was analyzed. A CMT welder was used to minimize the heat effect on the base material.

Korean melon (Cucumis melo L.) is an environment in which most farming work can affect the increase in musculoskeletal diseases, and the stems are attracted to the ground in order to grow no-heating cultivation. In this study, growth and productivity were compared according to the type of high-bed. The narrower the surface area at the bottom of the high-bed, the faster the initial growth, which was advantageous. The bed is which the height if 70 cm, the surface temperature has risen due to the increase in direct solar radiation inflow since April, requiring side light blocking to block the inflow of solar radiation. In terms of fruit quality, the 200 cm width treatment had higher fruit sugar content and better hardness than the 160 cm treatment. From April to September, the total yield was 6.8 kg/plant of treatment A, 8.7 kg/plant of treatment B, 5.8 kg/plant of treatment C, treatment B mainly 50% higher than treatment C, and 27% higher than treatment A. Therefore, the bed form suitable for Korean melon high bed is 200 cm wide, 40 cm high between the surface and the bed, and the surface of the passage between the beds is 30cm high from the ground to the bed.

This study was aimed to determine the changes in CO2 concentration according to the temperatures of daytime and nighttime in the CO2 supplemental greenhouse, and to compare calculated supplementary CO2 concentration during winter and spring cultivation seasons. CO2 concentrations in experimental greenhouses were analyzed by selecting representative days with different average temperatures due to differences in integrated solar radiation at the growth stage of leaf area index (LAI) 2.0 during the winter season of 2022 and 2023 years. The CO2 concentration was 459, 299, 275, and 239 μmol·mol-1, respectively at 1, 2, 3, and 4 p.m. after the CO2 supplementary time (10:00-13:00) under the higher temperature (HT, > 18°C daytime temp. avg. 31.7, 26.8, 23.8, and 22.4°C, respectively), while it was 500, 368, 366, 364 μmol·mol-1, respectively under the lower temperature (LT, < 18°C daytime temp. avg. 22.0, 18.9, 15.0, and 13.7°C, respectively), indicating the CO2 reduction was significantly higher in the HT than that of LT. During the nighttime, the concentration of CO2 gradually increased from 6 p.m. (346 μmol·mol-1) to 3 a.m. (454 μmol·mol-1) in the HT with a rate of 11 μmol·mol-1 per hour (240 tomatoes, leaf area 330m2), while the increase was very lesser under the LT. During the spring season, the CO2 concentration measured just before the start of CO2 fertilization (7:30 a.m.) in the CO2 enrichment greenhouse was 3-4 times higher in the HT (>15°C nighttime temperature avg.) than that of LT (< 15°C nighttime temperature avg.), and the calculated amount of CO2 fertilization on the day was also lower in HT. All the integrated results indicate that CO2 concentrations during the nighttime varies depending on the temperature, and the increased CO2 is a major source of CO2 for photosynthesis after sunrise, and it is necessary to develop a model formula for CO2 supplement considering the nighttime CO2 concentration.

The blockage rate for three kinds of nets commonly used in agricultural facilities was assessed by using the image acquisition and its relevant processing. By using both empirical relations presented by Idel’chik and Richards and Robinson, and the blockage rate obtained from the image processing, the pressure drop through the nets was predicted and also compared with wind tunnel experiment results. The results of the study showed that the blockage rate of the net was discriminated according to such factors as the magnitude of nets, the existence of inside threads, the thickness and number of threads. In addition, the blockage rate for the incident angle of 0° when the wind blew at the front had the range of 0.22－0.29 (0.22－0.32 when considering whole incident angles from 0° to 45° by 15°). For the nets with the blockage rate of about 30% or below, the prediction by the empirical relations of by Idel’chik and Richards and Robinson showed a little higher pressure drop overall than that of the wind tunnel test, but the use of the empirical relations and the blockage rate could be thought of as providing effectively meaningful guidelines for the safe design of agricultural facilities including nets because the wind tunnel test has been tedious and expensive. Further research and potential application on the prediction technique of the pressure drop, regarding both a subtle deformation by the wind and manufacturing methods with regard to the level of knots and the existence of inside threads, needs to be done for the nets with higher blockage rate.

본 연구는 국내 가정에서 사용하고 있는 냉장고 및 냉 동고의 온도 분포에 대한 현황을 파악하기 위하여 냉장고 대상 25가구, 냉동고 대상 25가구를 선정하고 온도 측정 을 시행하였다. 가정용 냉장 및 냉동고의 실제 공간상의 온도 분포 조사 결과, 냉장고 대상 가구에서 측정된 온도 는 최저 -8.2oC, 최고 15.8oC, 평균 3.73oC로 조사되었으며, 공간 위치별 온도 분포는 문 보관 칸 5.06±1.69oC, 내부 벽면 4.18±1.19oC, 내부 보관함 3.41±1.36oC로 내부 보관함 의 온도가 가장 낮았고, 각 위치에서 상단 및 하단의 유의 적인 온도 차이는 문 보관 칸에서만 확인되었다(P<0.01). 냉 동고 대상 가구에서 측정된 온도는 최저 -30.3oC, 최고 0.7oC, 평균 -17.95oC로 조사되었으며, 공간 위치별 온도 분포는 문 보관 칸 -17.19±1.68oC, 내부 벽면 -17.81±1.07oC, 내부 보관함 -18.78±1.72oC로 냉장고 결과와 동일하게 내부 보 관함의 온도가 가장 낮고, 문 보관 칸에서만 상·하단의 유 의적인 온도 차가 확인되었다(P<0.01). 냉장·냉동고 내에 서 위치별 최대 온도 차이는 각각 2.18oC, 2.02oC로 확인 되었으며, 결론적으로 냉장·냉동고 전체의 온도가 일정하 게 유지되는 것이 아니며, 보관되는 위치별로 유의적인 편 차가 존재하는 것으로 나타났다. 이에 따라 냉장·냉동고 제조사와 공공기관에서 식품별 권장 보관 위치를 고객들 에게 적극적으로 권고하고, 각 가정에서는 온도 변화에 민 감한 식품을 보관할 경우 문쪽 보관을 지양하는 등 보관 관리 의식을 가져야 할 것으로 사료된다.

Ipomoea aquatic is a leafy vegetable of the Convolvulaceae family, and is a tropical plant widely inhabiting southern China and Southeast Asia, and is widely known as Morning Glory in the West. In this study, the anti-inflammatory effects of ethyl acetate extract from Ipomoea aquatic extracts (IAE) were tested against lipopolysaccharide (LPS)-induced activation microglia BV2 cells. The production of nitric oxide (NO) and cell viability were measured using the Griess reagent and MTT assay, respectively. Inflammatory cytokine [interleukin (IL)-6, tumor necrosis factor (TNF)-, and interleukin-1 (IL-1)] were detected qPCR in LPS induced BV-2 cells. Subsequently, nuclear factor (NF)-B, mitogen-activated protein kinases (MAPKs), and nuclear factor erythroid-2-related factor 2 (Nrf2) were analyzed through western blot analyses and immunofluorescence. Ipomoea aquatic down-regulated of inflammatory markers and up-regulated anti-inflammatory and anti-oxidants in BV2 cells.

축산물 중 잔류허용기준이 설정되어 관리하고 있는 농약 azocyclotin, cyhexatin, fenbutatin oxide는 대표적인 유 기주석계 살비제이다. 기존 시험법은 가스크로마토그래피 를 사용하여 정량한계가 높고 분석 시 재현성이 떨어져 이에 대한 개선이 필요한 실정으로 본 연구에서는 비교적 간편하며 시간이 적게 소요되는 QuEChERS법을 활용하여 azocyclotin, cyhexatin, fenbutatin oxide의 시험법을 마련하 고자 하였다. 1% 아세트산을 함유한 아세트산에틸:아세토 니트릴(1:1) 혼합액을 이용하여 진탕 추출 후 d-SPE로 정 제하고 이를 농축 후 LC-MS/MS를 이용한 시험법을 개발 하였다. Azocyclotin, cyhexatin 및 fenbutatin oxide의 결정 계수(R2)는 0.99 이상으로 높은 직선성을 확인하였으며 정 량한계는 0.01 mg/kg으로 높은 감도를 나타내었다. 대표 축산물 5종(소, 돼지, 닭, 계란, 우유)에서 LOQ(0.01 mg/ kg), MRL(0.05 mg/kg), MRL 10배(0.5 mg/kg)의 농도에서 회수율 실험을 한 결과 평균 회수율이 76.4-115.3% 및 84.4-110.8%이었으며, 상대표준편차는 25.3% 이하로 나타 났다. 본 연구는 Codex 가이드라인(CAC/GL 40-1993, 2003) 및 ‘식품의약품안전처 식품의약품안전평가원의 식 품등 시험법 마련 표준절차에 관한 가이드라인(2016)’에 적합한 수준임을 확인하였다. 따라서 본 연구에서 확립한 시험법은 축산물 중 잔류할 수 있는 azocyclotin, cyhexatin, fenbutatin oxide의 안전관리를 위한 공정시험법으로 활용 가능할 것으로 판단된다.

The major active components of Astragalus membranaceus (AM) are isoflavones, which exist in the form of various glycosides. Nuruk is a traditional fermentation starter in Korea, and is suitable for the biotransformation of isoflavone glycosides because it contains various microorganisms and enzymes. This study was performed to determine changes in the isoflavones and antioxidant properties of AM fermented (AF) with nuruk over 24 hours. AF was sampled after 0, 2, 4, 6, 12, 18, and 24 h of fermentation, and calycosin 7-glucoside, ononin, calycosin, and formononetin content, and the antioxidant properties of AF were analyzed. The total phenolic content increased with fermentation time, and the ABTS radical scavenging activity increased until 6 h of fermentation and then decreased. During fermentation, the isoflavone glycosides decreased significantly as fermentation time increased. The contents of calycosin and formononetin, which are aglycons of calycosin-7-glucoside and ononin, increased from 100.54 μg/g to 276.84 μg/g and from 56.29 μg/g to 123.04 μg/g, respectively, at 18 h of fermentation. Significant correlations were observed between fermentation time, isoflavone content, and antioxidant properties. The results of this study showed that fermentation with nuruk is suitable for the biotransformation of isoflavones in AM.

This study examines the characteristics of berries from secondary bearing shoots of ‘Scintilla’ southern highbush blueberry, grown hydroponically in the Jinju, Gimhae, and Uiryeong regions of Gyeongnam Province. Typically, ‘Scintilla’ forms flower buds at the tips of regular bearing shoots during the previous season, yielding berries in the current season. However, under heated cultivation, we observed a proliferation of secondary bearing shoots that produce berries in the same growing season. Flowering and harvesting on secondary bearing shoots were delayed by 52 and 36 days, respectively, compared to regular bearing shoots. However, these shoots exhibited a 54% increase in diameter and a 10% increase in length. We found no significant difference in berry size and soluble solid content between the two types of shoots. Notably, berries from the secondary bearing shoots had higher potassium and lower calcium and magnesium concentrations. We conclude that berries from secondary bearing shoots could be marketable, provided the bushes are healthy. These findings provide valuable insights for optimizing cultural practices to improve the yield and quality of blueberries under specific environmental conditions.

To harvest marketable cucumbers, high quality seedlings must be used. Producing seedlings in the greenhouse during the low radiation period decreases marketability due to insufficient light for growth. Supplemental lighting with artificial light of different quality can be used to improve low light conditions and produce high quality seedlings. Therefore, this study was conducted to select the appropriate supplemental light sources on the growth and seedling quality of grafted cucumber seedlings during the low radiation period. Three cultivars of cucumber were used as scions for grafting; ‘NakWonSeongcheongjang’, ‘Sinsedae’, and ‘Goodmorning baekdadagi’. Figleaf gourd (Cucurbita ficifolia) ‘Heukjong’ was used as the rootstock. The seeds were sown on January 26, 2023, and grafted on February 9, 2023. After graft-taking, cucumbers in plug trays were treated with RB light-emitting diodes (LED, red and blue LED, red:blue = 8:2), W LED (white LED, R:G:B = 5:3:2), and HPS (high-pressure sodium lamp), respectively. Non-treatment was used as the control. Supplemental lighting was applied 2 hours before sunrise and 2 hours after sunset for 19 days. The stem diameter and fresh and dry weights of roots did not differ significantly by supplemental light sources. The plant height and hypocotyl length were decreased in W LED. However, the leaf length, leaf width, leaf area, and fresh and dry weights of shoots were the highest in the RB LED. Seedling qualities such as crop growth rate, net assimilation rate, and compactness were also increased in RB LED and W LED. After transplanting, most of the growth was not significant, but early yield of cucumber was higher in LED than non-treatment. In conclusion, using RB LED, W LED for supplemental light source during low radiation period in grafted cucumber seedlings improved growth, seedling quality, and early yield of cucumber.

This study was conducted to investigate the growth characteristics of cucumber (Cucumis sativus L. ‘Joeunbaekdadagi’) and tomato (Solanum lycopersicum L. ‘Dotaerang Dia’) seedlings by light intensities and CO2 concentrations in a closed-type plant production system (CPPS). Cucumber and tomato seeds were sown in 50-cell trays and germinated in CPPS at air temperature 25 ± 1°C and relative humidity 50 ± 10% for 4 days. After germination, the CO2 concentrations and light intensity treatment were treated at 500 (ambient), 1,000, and 1,500 μmol·mol-1 and 100, 200, and 300 μmol·m-2·s-1 photosynthetic photon flux density (PPFD), respectively. The leaf area of cucumber showed the highest value in CO2 1,500 μmol·mol-1. However, the leaf area of the tomato had no significant difference in CO2 concentrations and light intensities treatments. In cucumber and tomato both seedlings, the growth and quality such as compactness and leaf area rate were increased with the increase of light intensity, and there were highest in 300 μmol·m-2·s-1. The root surface and number of root tips of cucumber and tomato seedlings were significantly increased with the increase in light intensity. In conclusion, the regulation of the CO2 concentrations and light intensity can control the growth and quality of cucumber and tomato seedlings in CPPS, especially, increasing the light intensity can improve more significantly the growth and quality of seedlings.

ITO 투명 전극 필름은 디스플레이, 전기 자동차 등 산업 전 범위에서 널리 사용되는 전자 재료이다. 본 연구에서는 이러한 indium tin oxide (ITO) 필름의 열성형 안정성을 향상시키기 위하여 Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) 전도성 고분자 코팅 용액 조성을 결정하였다. 1000 S/cm의 고 전도성을 보이는 PEDOT:PSS 용액에 끓는점이 각기 다른 4가지 종류의 용매를 희석하였고, 코팅 전 후 면저항 변화를 분석하였다. 또한 380~800 nm 영역의 광 투과율 분 석 및 Raman 스펙트럼 분석을 통하여 PEDOT:PSS 박막이 코팅된 ITO 투명 전극의 전기적 특성 결정 메커니즘을 규명하였 다. 230°C 열성형 공정 결과 ITO 필름은 113% 연신 상태에서 이미 전기 전도성을 읽었지만, ethylene glycol을 희석 용매로 사용하여 얻어진 전도성 고분자 박막이 적용된 ITO 필름은 126% 고 연신 상태에서도 초기 60 Ω/sq 면저항을 246 Ω/sq로 유지하는 우수한 전기 전도성을 보였다.

PURPOSES : This study aims to examine actual cases of providing detour information in accidental situations such as traffic accidents and road construction through a VMS installed on national highways in metropolitan areas with alternative routes, as well as cases of simultaneously providing travel time information on parallel paths such as national and regular highways. For each case, we analyzed whether the provision of VMS traffic information leads to route changes and substantial effects. METHODS : To analyze traffic changes on the main and detour roads based on the detour information provided on traffic accidents in actual cases, the traffic volume and speed on the accident day were compared with those on the same days and at the same time of the day (regular days) based on the VDS data of the main and detour roads. Cases providing more detour information on road construction were investigated by examining three time periods: one week from construction initiation and one week before and after the construction period (regular days). The traffic volume and speed on the main road were compared based on the VDS data, and those on the detour road were compared based on data made available by private entities. Regarding the cases of simultaneously providing drivers with comparative information on travel time over parallel sections of national and regular highways, traffic situation changes in highways were analyzed in the following special traffic control periods (New Year's Day, NY Day), during which congestion is expected due to heavy traffic: before and after the provision of comparative information for 2015 New Year's Day and 2016 NY Day. RESULTS : The detour rate related to route changes based on the detour information for traffic accidents was 35%. On the detour route, the traffic volume increases as traffic from the main road is absorbed. However, the average travel speeds did not differ significantly. When further detour information regarding a road construction project was provided, the detour rate from the main road was 21%. The travel speeds were similar, except on the first day of construction. Almost no changes were observed in the first section of the detour. The speed slightly decreased in the second section but did not significantly hinder the traffic flow. When comparative traffic time information on parallel routes (national highways and expressways) was provided, the traffic volume increased to some extent after the report was provided for every case. However, the data frequency rate in the 5-min unit, which was still under the congestion speed standard (40 km/h), decreased. This indicates that traffic congestion was significantly relieved. CONCLUSIONS : Previous studies on detour rates or route changes based on VMS traffic information have focused on VMS instruments on expressways. Although their estimates were based on simulated situations, this study used actual VMS installed on national highways. In addition, this study utilizes the existing case records of national highway ITS centers, covering traffic situation monitoring, measures for accidental situations, etc., in regular times or special traffic control periods, as well as statistical data, including ITS real-time traffic information. The analysis results of this study accurately represent situations on actual roads and can be utilized to analyze future ITS operation and installation project effects.

PURPOSES : In this study, energy-consuming processes in asphalt plants were evaluated, and the drying and mixing processes were characterized using a thermal equilibrium equation-based model to quantitatively estimate the amount of energy consumed during the production of mixtures in asphalt concrete plants. METHODS : An energy consumption model based on the thermal equilibrium equation was used to estimate the energy consumption of the aggregate drying process that consumes the maximum energy; the energy consumed for material transportation, storage, and operation of other facilities was cited from the literature. The results were compared with the actual results obtained for recycled hot asphalt mixtures and recycled warm mix asphalt mixtures, and a sensitivity analysis was performed by varying the conditions. RESULTS : An analysis of the main processes required to produce asphalt mixtures showed that the water content had the largest impact on energy consumption (approximately 80%). This quantitatively supports the opinion of field practitioners that maximum energy is consumed during aggregate drying. Although some discrepancies were observed, the results were found to be reasonable and within the range of typical measurements. CONCLUSIONS : The thermal energy consumption estimation model provides consistent results that reflect the characteristics of the mixture and can be used to derive the thermal energy consumption rates for individual materials, such as aggregates and binders. This can be used to identify the priorities for process optimization within a plant.

본 연구는 해양산업시설에서 배출되는 위험·유해물질(Hazardous and Noxious Substances) 중 아연을 대상으로 국내 서식종을 기반 으로 한 독성시험을 수행하고, 그 결과를 활용하여 국내 실정에 맞는 아연의 해양 수질 준거치(Marine Water Quality Criteria)를 제안하였다. 시험생물은 국내 연근해에 분포하고 산업적으로 유용하며, 표준 시험방법이 존재하는 종을 우선으로 5개의 분류군(Algae, Rotifer, Crustacean, Mollusc, Fish)의 총 10종을 선정하여 독성시험을 수행하였으며, 급·만성비(Acute-Chronic Ratio) 산출을 위하여 무척추동물, 어류 분류군에 대한 만성독성시험을 수행하였다. 국내종 독성시험에서 산출된 독성값을 활용한 수질준거치는 US EPA의 CCC (Criterion Continuous Concentration) 산출 기준으로 9.56 ㎍/L, 호주/뉴질랜드의 산출 기준으로 15.50 ㎍/L 로 나타나 호주/뉴질랜드에서 권고하는 기준인 14.40 ㎍/L 와 유사하였다. US EPA 및 호주/뉴질랜드는 자국의 생태독성 데이터베이스(US EPA Ecotox Database, Australasian Ecotoxicology Database)를 보유하고, 신뢰도 높은 독성값들을 생성하여 수질 기준 및 산출 기준을 갱신하고 있다. 한편, 국내에서는 국내종 기반 급성 독 성값을 적용하고 있지만, 중요한 산출 지표인 급·만성비는 US EPA 또는 유럽의 결과값을 활용하여 해양 수질 준거치를 산출하고 있으며, 국내의 생태독성 자료 또한 제한적인 실정이다. 따라서, 국내 해양 서식종을 기반으로 한 지속적인 독성시험과 준거치 설정 체계를 확보하 여 국내 해양생물과 생태계를 보호할 수 있는 해양 수질 준거치 도출이 필요할 것으로 판단된다.

본 연구는 난대상록수종인 종가시나무에 대한 수간곡선식의 도출과 재적표의 작성 및 탄소배출계수를 이용하여 탄소저장, 흡수량을 추정하고자 수행하였다. 분석에 사용된 공시목은 전남, 경남, 제주 등에서 수집된 468본이며, 수간형태를 도출하기 위하여 적용한 수간곡선 모형은 Kozak 모델이다. 이 모델의 적합도는 0.9452, 편의는 0.0807, 추정치 표준오차의 백분율은 1.7145, 평균절대편차는 1.2655로 각각 나타났다. 종가시나무의 개체목 재적은 Kozak 수간곡선 모델에 Smalian 재적식을 적용시켜 산출하였으며, 수고와 흉고직경급별로 재적표를 작성하였다. 그리고 붉가시나무 재적표와 이번에 만든 종가시나무 재적표를 서로 비교한 결과(t-test), 통계적으로 두 집단 간에 차이가 없는 것으로 나타났다. 따라서 이들 재적표는 두 수종 중 하나만 이용하거나, 둘을 하나로 통합하여도 문제가 없을 것으로 판단된다. 한편 종가시나무림의 탄소저장 및 흡수량은 산림바이오소재연 구소 시험림의 조사구를 대상으로 하였다. 이들 조사구를 대상으로 탄소저장 및 흡수량을 계산한 결과, 생육상태가 양호한 시험구(A)에서 탄소저장량 은 93.17 C ton/ha, 그리고 탄소흡수량은 13.14 CO2 ton/ha/yr 인 것으로 나타났다. 반면에 생육이 저조한 시험구(B)의 탄소 저장 및 흡수량은 양호한 시험구보다 약 1/3 정도 낮게 나타났다.

본 연구에서는 광섬유를 이용한 탄소섬유복합재료(CFRP) 긴장재 개발을 목표로 다양한 성능실험을 수행하였다. 광섬 유 센서를 활용한 탄소섬유 긴장재의 계측성능은 부착된 변형률 게이지의 계측 값과 비교한 결과, 3.7% 이내로 동일한 계측을 하는 것으로 나타났고, 탄소섬유 긴장재 파단까지 계측이 가능하기 때문에, 센싱용 긴장재로 활용이 가능함을 확인하였다. 현장 적용을 위한 장기성능 실험결과, 릴렉세이션의 경우 저릴렉세이션 강연선 기준 값인 2.5%를 만족하였고 피로시험의 경우 도로 교설계기준을 준용하여 200만회 이후 인장성능의 변화가 없는 것을 확인되어, 탄소섬유 긴장재 뿐만 아니라 정착구도 장기성능 을 확보한 것으로 판단된다

PURPOSES : This study aims to determine whether machine learning techniques based on the results of chemical analysis experiments can be rationally applied to evaluate the aging of various asphalt binders used throughout the country. METHODS : We conducted chemical experiments such as FT-IR, H-NMR, C- NMR, and GPC for the three-stage aging levels of eight types of asphalt binders used in the country and utilized two artificial neural network models to determine valid chemical experimentation and conditions for the use of neural modeling through predictions. RESULTS : The M-prop model, which combined the findings from each neural network model into a single artificial neural network model, demonstrated superior predictive performance compared with the M-base model, which assessed aging using two cluster layers. In addition, the minimum amount of data required to achieve 100% predictive accuracy for the target asphalt binders, regardless of the artificial neural network model, was 18, and the amount of training data decreased to less than 50%. CONCLUSIONS : The predictive accuracy of the aging of asphalt binders was significantly enhanced when GPC data was used, indicating that GPC should be prioritized in evaluating the aging of asphalt binders.