Fermentation by Rhizopus spp. has been used as a traditional medicine for treating various inflammatory diseases. Allergic asthma is a chronic respiratory disease that is caused by an exaggerated immune response. This study was conducted to ascertain the anti-inflammatory effects of Rhizopus spp. fermentation extract (RU) on a mouse model of ovalbumin (OVA)-induced asthma. The animals were intraperitoneally injected OVA on day 1 and 7, followed by OVA intranasal inhalation on days 14 to 18. The animals were treated daily with RU (100 and 200 mg/kg) by oral gavage from day 18 to day 23. RU significantly decreased eosinophilia and the production of inflammatory cytokines and OVA specific immunoglobulin E in animals with asthma, along with reducing airway inflammation and mucus secretion in lung tissue. Histological changes in the lungs and levels of inflammatory mediators of allergic airway inflammation were evaluated. The regulatory effects of RU on type 2 helper T (Th2) cell activation were investigated. RU administration attenuated asthmatic changes such as inflammatory cell infiltration and mucus production, decreased the levels of Th2-related cytokines, and reduced Th2 cell activation. Administration of RU effectively reduced allergic responses in asthmatic mice, which is associated with regulating Th2 cell activation and differentiation. These results indicate that RU can attenuate the respiratory symptoms of asthma.

A strain of Amphidinium species was established from samples collected from the intertidal zone of a sandy beach of Jeju Island, Korea. Its cells were 13.0-15.0 μm in length and 10.0-13.0 μm in width. Its cell shape was round or oval and dorsoventrally flat. A pyrenoid was located in the center of the cell and a nucleus was posteriorly located. Its epicone was small and left-deflecting. Its cingulum had V-shape on the ventral side, forming a ventral ridge and extending to the sulcus. Polygonal amphiesmal vesicles and ring-shaped body scales not described previous were observed on the surface of the cell. Its morphological features were consistent with those of previously described Amphidinium fijiense. Phylogeny based on ITS region and LSU rDNA sequences revealed that this Amphidinium isolate was clearly clustered with other A. fijiense strains, but separated from other Amphidinium species. These results indicate that this Amphidinium isolate is A. fijiense. This study reports its presence for the first time in the intertidal zone of a sandy beach of Jeju Island, Korea.

Soft magnetic powder materials are used throughout industries such as motors and power converters. When manufacturing Fe-based soft magnetic composites, the size and shape of the soft magnetic powder and the microstructure in the powder are closely related to the magnetic properties. In this study, Fe-Si-Al-P alloy powders were manufactured using various manufacturing process parameter sets, and the process parameters of the vacuum induction melt gas atomization process were set as melt temperature, atomization gas pressure, and gas flow rate. Process variable data that records are converted into 6 types of data for each powder recovery section. Process variable data that recorded minute changes were converted into 6 types of data and used as input variables. As output variables, a total of 6 types were designated by measuring the particle size, flowability, apparent density, and sphericity of the manufactured powders according to the process variable conditions. The sensitivity of the input and output variables was analyzed through the Pearson correlation coefficient, and a total of 6 powder characteristics were analyzed by artificial neural network model. The prediction results were compared with the results through linear regression analysis and response surface methodology, respectively.

The paper aims to identify place names in illustration titles in John Nieuhoff’s An Embassy from the East-India Company of the United Provinces, to the Grand Tartar Cham Emperour of China (English in 1669, Dutch in 1665). Nieuhoff’s text was very popular with the 17th century European public. After its first publication in Dutch it was translated into French, German, Latin and English and reprinted fourteen times in many European countries. In particular, his illustrations were highly appreciated because they provided realistic and vivid images of China to Europeans at a time when there had been little information about China. It had a great influence on the fever for Chinese style in Europe in the 18th century. Nieuhoff’s illustrations were frequently applied to everyday painted objects such as furniture, screens, wallpaper, textiles, and dishes. About 80% of illustrations present scenery in the area where the Dutch embassy anchored or passed by on their journey from Guangdong to Beijing. However, the place names which were transliterated into Dutch and other European languages are a major obstacle for following Nieuhoff’s travelogue. It is not easy to infer the Chinese regional names from either the Dutch or the English text. Therefore, the paper identifies Chinese regions in the text by mainly comparing Nieuhoff’s information and transliteration with Martino Martini’s Novus Atlas Sinensis (1655).

PURPOSES : The aim of this study is to evaluate the stripping resistance of a bead coating via the Hamburg wheel tracking test and image analysis. METHODS : First, the stripping resistance of the bead coating was evaluated via the Hamburg wheel tracking test. A pneumatic wheel with a load of 175±2 N was used to simulate repeated skid cycles. Several bead coating mixtures with different numbers of coating layers, i.e., zero, one, two, three, and four layers, i.e., zero, one, two, three, and four layers,were conducted. Finally, an image analysis program was developed to analyze surface images captured from the Hamburg wheel tracking test. RESULTS : The results show that the samples with more coating layers exhibit higher stripping resistance. After 500 stripping cycles, the percentage of bead loss is 4% to 28%. At 80% bead loss, the mixture with one coating layer presents more skid cycles than the control sample without a coating layer. CONCLUSIONS : Incorporating a coating layer can improve the stripping resistance of glass beads under repeated skid cycles. Additionally, an image analysis program is established in this study to determine the percentage of bead loss caused by the stripping test.

Currently, low and intermediate-level radioactive wastes and spent nuclear fuels are continuously generated in Korea. For the disposal of the radioactive wastes, the transport demand is expected to increase. Prior to transportation, it is necessary to evaluate the radiation risk of transportation to confirm that is not high. In Korea, there is no transportation risk assessment code that reflects domestic characteristics. Therefore, foreign assessment codes are used. In this study, before developing the overland transportation risk assessment code that reflects domestic characteristics, we analyzed the radiation risk assessment methodology in transportation accident codes developed in other countries. RADTRAN and RISKIND codes were selected as representative overland transportation risk assessment codes. For the two codes we analyzed accident scenarios, exposure pathways, and atmospheric diffusion. In RADTRAN, the user classifies accident severity for possible accident scenarios, and the user inputs the probability for each accident severity. On the other hand, in the case of RISKIND, the accident scenarios are classified and the probabilities are determined according to the NRC modal study (LLNL, 1987) in consideration of the cask impact velocity, cask impact angle, and fire temperature. In the case of RISKIND, the accident scenarios are applied only to transportation of spent nuclear fuel, and cannot be defined for low and intermediate-level radioactive waste. However, in the case of RADTRAN, since the severity and probability of accidents are defined by user, it can be applied to low and intermediate-level radioactive wastes. As the exposure pathways considered in transportation accident, both RADTRAN and RISKIND consider external exposure (cloudshine and groundshine), and internal exposure (inhalation, resuspension inhalation and ingestion). In the case of RADTRAN, additionally, external exposure due to loss of shielding (LOS) is considered. Atmospheric diffusion calculation is essential to determine the extent to which radioactive materials are diffused. In both RADTRAN and RISKIND, atmospheric diffusion calculations are based on Gaussian diffusion model. Users must input Pasquill stability class, release height, heat release, wind speed, temperature and mixing height, etc. Additionally, RADTRAN can input weather information relatively simply by inputting only the Pasquill stability class fraction and selecting the US average weather option. This study results will be used as a basis for developing radioactive waste overland transportation risk assessment code that reflects domestic characteristics.

Cement is widely used as representative industrial material. In Korea, about 50 million tons of cement are consumed every year. In the manufacture of cement, raw materials containing NORM such as fly ash and bauxite are used. Therefore, the workers can be subjected to radiation exposure. The major exposure pathway in NORM industries is internal exposure due to inhalation of aerosol. Internal radiation dose due to aerosol inhalation varies depending on physicochemical properties of the aerosol. Therefore, the objective of this study was to investigate aerosol properties influencing inhalation dose in cement industries. In this study, aerosol properties were measured for two cement manufacturers. A particulate size distribution and concentration at various processing areas in cement manufacturing industries in Korea were analyzed using a cascade impactor. The mass density of raw materials and byproducts were measured using pycnometer. Shape of particulates was analyzed using SEM. The radioactivity concentration of Ra-226, Ra-228 for U/Th decay series was measured using HPGe. Particulate concentration by size was distributed log-normally with maximum at particle size about 7.2 μm in manufacturer A and 5.2 μm in manufacturer B. The mass density of fly ash and cement were 2.3±0.06, 3.2±0.02 g/cm3 respectively in manufacturer A. In manufacturer B, the mass density of bauxite and cement were 3.4±0.02, 2.9±0.01 g/cm3 respectively. The shape of particulates appeared as spherical shape in manufacturer A and B regardless of sampling area. Thus, a shape factor of unity could be assumed. The radioactivity concentrations of Ra-226, Ra-228 were 82±9, 82±8 Bq/kg for fly ash, and 25±4, 23±3 Bq/kg for cement in manufacturer A. In manufacturer B, the radioactivity concentrations of Ra-226, Ra-228 were 344±34, 391±32 Bq/kg for bauxite, and 122±13, 145±12 Bq/kg for cement. The radioactivity concentrations of Ra-226, Ra-228 in cement were less than raw materials such as fly ash and bauxite. It is because the dilution of the radioactivity concentration occurred during mixing with other raw materials in cement production process. This study results will be used as database for accurate dose assessment due to airborne particulate inhalation by workers in cement industries.