In general, the design response spectrum in seismic design codes is based on the mean-plus-one-standard deviation response spectrum to secure high safety. In this study, response spectrum analysis was performed using seismic wave records adopted in domestic horizontal design spectrum development studies, while three response spectra were calculated by combining the mean and standard deviation of the spectra. Seismic wave spectral matching generated seismic wave sets matching each response spectrum. Then, seismic fragility was performed by setting three damage levels using a single-degree-of-freedom system. A correlation analysis was performed using a comparative analysis of the change in the response spectrum and the seismic fragility concerning the three response spectra. Finally, in the case of the response spectrum considering the mean and standard deviation, like the design response spectrum, the earthquake load was relatively high, indicating that conservative design or high safety can be secured.

In this study, a vibrating nozzle using the waste vibration energy of the compressor body was installed in the suction flow path to improve the efficiency of the compressor through the pre-compression. To this end, the behavior of the suction valve according to the vibrating nozzle and the mass flow rate of the refrigerant entering the compression chamber were numerically analyzed. The results showed that the mass flow rate increased proportionally as the angle of the vibration nozzle increased. Among the profile shapes of the vibration nozzle, the concave or straight shape showed the highest mass flow rate. Considering the ease of machining, the straight shape is more favorable. On the other hand, as the operating frequency and stroke of the vibration nozzle increased, the mass flow rate also increased proportionally. It can be seen that the largest nozzle angle, operating frequency, and stroke are favorable for pre-compression unless the suction flow is restricted.. In the future, it is necessary to apply the vibrating nozzle system to an actual compressor model to experimentally check the compressor's cooling power, compression work and EER.

This study initiated research aligned with the body positivity movement, aiming to explore size diversity for groups facing relative size discrimination due to their deviation from average body types. Using KS adult women's apparel dimensions as a reference, jackets were developed for women in their 20s to 30s who belong to the small petite-size (S[P]) category, which is characterized by a height under 155cm (petite) and a bust-circumference from 72cm to less than 82cm (small). Using 3D virtual-fitting, we conducted experiment-pattern production and refinement and subsequent real-fitting evaluations by participants to objectively validate aesthetics and comfort. The study’s findings are as follows: First, utilizing a 3D virtual-fitting program by identifying ‘creases’ and ‘garment pressure points’ in the jacket appearance, experiment patterns were refined and real jackets were produced. This approach addressed challenges in recruiting participants with specific body types and allowed for efficient research in terms of cost and time. Second, through real-fitting evaluations, basic-fit and slim-fit jackets labeled as <79-88-150> were developed for the S(P) size. we presented ‘size spec’ and ‘ease allowance’ for jackets by waist fit. Both fits received positive evaluations with approximately 53.5cm sleeve length, and 11.7cm shoulder length. The ease allowances for the basic-fit jacket were approximately 9.2cm at the bust circumference, 12.8cm at the waist circumference, and 6cm at the hip circumference. Similarly, the slim-fit jacket exhibited ease allowances of about 4.8cm at the bust circumference, 4cm at the waist circumference, and 4cm at the hip circumference, receiving positive evaluations for aesthetics and comfort.

이 연구의 목적은 예비 지구과학 교사들이 선다형 문항 제작 실습 프로그램에 참여하는 과정에서 드러나는 문 항 제작 역량의 발달 양상을 이해하는 것이다. 이를 위해 예비 지구과학 교사 15명이 선다형 문항 제작 과정 중 공동 검토 과정에서 나타나는 논의에 초점을 맞춰 그 특징을 분석하였다. 구성주의 근거 이론을 토대로 3단계의 코딩을 수 행한 결과, 36개의 초기 코드, 12개의 초점 코드, 5개의 이론적 코드가 도출되었다. 코딩 범주에 근거하여 논의의 특징 을 규정하는 검토 문화와 문항에 대한 관점을 두 축으로 설정하였으며, 이로부터 수험생의 문제풀이, 조심스레 한 걸음 떼기, 짙어지는 담화를 주제로 하는 세 가지 이야기를 구성하였다. 또한 프로그램 동안 일관되게 드러나는 문항 제작 역량의 한계를 다다르지 못한 노정에 대한 네 번째 이야기로 서술하였다. 문항 제작 과정에서 드러나는 평가 전문성은 예비교사의 정체성 발달과 관련되어 있으며, 본 연구에서 적용한 개발한 프로그램의 효과와 의의 및 프로그램의 개발과 개선을 위한 시사점을 논의하였다.

Tomatoes in greenhouse are a widely cultivated horticultural crop worldwide, accounting for high production and production value. When greenhouse ventilation is minimized during low temperature periods, CO2 enrichment is often used to increase tomato photosynthetic rate and yield. Plant-induced electrical signal (PIES) can be used as a technology to monitor changes in the biological response of crops due to environmental changes by using the principle of measuring the resistance value, or impedance, within the crop. This study was conducted to investigate the relationship between tomato growth data, vital response, and PIES resulting from CO2 enrichment in greenhouse tomatoes. The growth of tomato treated with CO2 enrichment in the morning was significantly better in all items except stem diameter compared to the control, and PIES values were also higher. The growth of tomato continuously applied with CO2 was better in the treatment groups than control, and there was no significant difference in chlorophyll fluorescence and photosynthesis. However, PIES and SPAD values were higher in the CO2 treatment group than control. CO2 enrichment have a direct relationship with PIES, growth increased, and transpiration increased due to the increased leaf area, resulting in increased water absorption, which appears to be reflected in PIES, which measures vascular impedance. Through this, this study suggests that PIES can be used to monitor crops due to environmental changes, and that PIES is a useful method for non-destructively and continuously monitoring changes of crops.

해수의 탁도는 수중의 부유 물질이나 생물에 의해 혼탁해지는 정도를 정량적으로 나타낸 변수로 연안 환경을 이해하는 데 중요한 해양 변수이다. 한반도의 서해안은 얕은 수심, 조류, 하천 유래 부유 퇴적물의 영향으로 광학적으로 강한 시공간 변동성을 가지고 있어서 인공위성 자료를 활용한 탁도 산출은 해양학적으로 다양한 활용 가능성을 가 진다. 본 연구에서는 경기만을 연구 해역으로 설정하고, 해수의 탁도 산출 알고리즘 개발을 위하여 2018년부터 2023년 7월까지 해양환경공단의 해양수질자동측정망 기반 현장 관측 탁도 자료와 Sentinel-2 인공위성의 MSI (Multi-Spectral Instrument) Level-2 자료를 사용하여 위성-현장 관측치 사이의 일치점 데이터베이스를 생산하였다. 이전의 다양한 탁도 산출식을 조사하여 정확도를 상호 비교하였고 경기만 해역에서 최적 파장대를 조사하고 분석하였다. 그 결과 녹색 밴드 (560 nm)를 기반으로 한 탁도 산출식이 0.08 NTU의 상대적으로 작은 평균 제곱근 오차를 보였다. 인공위성 광학 자료 를 기반으로 산출된 탁도는 해수의 광학적 특성과 연안 환경의 변동성을 이해하고 다양한 해상 활동에 도움을 줄 수 있을 것으로 기대된다.

In this study, the effect of crown heating on the cultivation environment, budding, flowering and yields of strawberry was analyzed. In December, January, and February, when the outside temperature was low, the average strawberry crown temperature at daytime in the test zone was 1.3°C higher than that in the control zone, and the average strawberry crown temperature at nighttime in the test zone was 2.7°C higher than that in the control zone. The average bed temperature at daytime in test zone was 1.7°C higher than that in the control zone, and the average bed temperature at nighttime in test zone was 2.4°C higher than that in the control zone. As a result of performing correlation analysis and regression analysis on strawberry crown temperature and budding period, the correlation coefficient was -0.86, which tended to be shorter as the crown temperature was higher, and the determination coefficient was 0.74. The total yields of strawberry during test period were 392.6 g/plant for test greenhouse and 346.0 g/plant for control greenhouse respectively. As for the quality of strawberries, the ratio of 2L (very large) grades and L (large) grades was 62.4% in the test greenhouse and 58.5% in the control greenhouse, indicating that the proportion of high quality strawberries was higher in the test greenhouse.