유통 중인 생분해성 합성수지로 만들어진 식품용 기구 및 위생용품 50건을 대상으로 ‘식품용 기구 및 용기·포장 공전’의 기준·규격을 검사하였다. PLA 재질의 유아식기 1 건에서 ‘과망간산칼륨소비량’이 20mg/L으로 기준치(10 mg/ L 이하)를 초과하였고, 그 외 모든 시료에서는 포름알데히 드, 납, 비소 등이 기준·규격 이하로 안전한 수준이었다. 또한 가정에서 유아식기를 소독하는 방법의 안전성을 조 사하기 위해, PLA 재질의 유아식기(n=21)에서 반복적인 열탕소독과 자외선 조사에 따른 이행량의 변화를 조사하였다. 반복적인 열탕소독이 자외선 조사에 비해 포름알데 히드와 비소의 이행량이 많았으나, 이행량은 매우 낮은 수 준이었다. 그리고 유아(만 1-3세) 기준으로 계산한 포름알 데히드와 비소의 일일추정섭취량(EDI)은 최대 6.0×10-4mg/ kg b.w./day 및 1.3×10-1 μg/kg b.w./day였으며, 이는 일일섭 취한계량(TDI, 0.15 mg/kg b.w./day) 및 잠정주간섭취허용 량(PTWI, 9.0 μg/kg b.w./week)의 0.40% 및 10.42%로 낮 은 수준임을 확인하였다. 따라서 현 국내에서 유통되고 있 는 식품용 생분해성 합성수지제는 안전한 수준임을 확인 하였다.

본 연구는 산업화 유망 식물인 회화나무의 이차대사산물 대량생산용 캘러스 확보에 필요한 기초조건을 확인하고자 수행하였다. 기내 배양한 회화나무 하배축을 2.0 mg·L-1 NAA + 0.1 mg·L-1 TDZ 배지에서 배양하였을 때 유백색의 부드러운 캘러스가 형성되었고, 캘러스 형성률 100±0.0%, 캘러스 형성에 걸리는 기간 7.1±0.03일, 캘러스 무게 249.8±12.73 mg으로 가장 효과적임을 확인하였다. 또한, 하배축에서 유도한 캘러스는 백색광 조건의 1.0 mg·L-1 IBA + 0.1 mg·L-1 TDZ 처리 배지에서 배양하였을 때 연노란색의 단단한 캘러스가 다량으로 형성되었고, 캘러스 생체중 186±5.4 mg, 면적 40.6±1.6 mm2으로 가장 무겁고, 크기가 우수한 것을 확인하였다. 기내 배양한 캘러스 소재 추출물의 추출수율은 50% 에탄올 추출 시 59%, 물 추출 시 54%로 확인하였고, 추출물 내 유효성분으로 마키아인 함량은 1.68 mg·g-1으로 검출되었다. 본 연구의 결과는 산업화 식물로써 유망있는 수종인 회화나무의 기내 대량증식과 이차대사산물 생산성을 향상할 수 있는 위한 기초자료로 활용할 수 있을 것이다.

Al2O3 has excellent sintering properties and is important in semiconductor manufacturing processes that require high-temperature resistance and chemical inertness in a plasma environment. In this study, a comprehensive analysis of the chemical characteristics, physical properties, crystal structure, and dispersion stability of three commercially available Al2O3 powders was conducted. The aim was to provide a technological foundation for selecting and utilizing appropriate Al2O3 powders in practical applications. All powders exhibited α-Al2O3 as the main phase, with the presence of beta-phase Na2O-11Al2O3 as the secondary phase. The highest Na+ ion leaching was observed in the aqueous slurry state due to the presence of the secondary phase. Although the average particle size difference among the three powders was not significant, distinct differences in particle size distribution were observed. ALG-1SH showed a broad particle size distribution, P162 exhibited a bimodal distribution, and AES-11 displayed a uniform unimodal distribution. Highconcentration Al2O3 slurries showed differences in viscosity due to ion release when no dispersant was added, affecting the electrical double-layer thickness. Polycarboxylate was found to effectively enhance the dispersion stability of all three powders. In the dispersion stability analysis, ALG-1SH exhibited the slowest sedimentation tendency, as evidenced by the low TSI value, while P162 showed faster precipitation, influenced by the particle size distribution.

The key to invasive pest management lies in preemptive action. However, most current research using species distribution models is conducted after an invasion has occurred. This study modeled the potential distribution of the globally notorious sweet potato pest, the sweet potato weevil (Cylas formicarius), that has not yet invaded Korea using MaxEnt. Using global occurrence data, bioclimatic variables, and topsoil characteristics, MaxEnt showed high explanatory power as both the training and test areas under the curve exceeded 0.9. Among the environmental variables used in this study, minimum temperature in the coldest month (BIO06), precipitation in the driest month (BIO14), mean diurnal range (BIO02), and bulk density (BDOD) were identified as key variables. The predicted global distribution showed high values in most countries where the species is currently present, with a significant potential invasion risk in most South American countries where C. formicarius is not yet present. In Korea, Jeju Island and the southwestern coasts of Jeollanam-do showed very high probabilities. The impact of climate change under shared socioeconomic pathway (SSP) scenarios indicated an expansion along coasts as climate change progresses. By applying the 10th percentile minimum training presence rule, the potential area of occurrence was estimated at 1,439 km2 under current climate conditions and could expand up to 9,485 km2 under the SSP585 scenario. However, the model predicted that an inland invasion would not be serious. The results of this study suggest a need to focus on the risk of invasion in islands and coastal areas.

Maintaining sea superiority through successful mission accomplishments of warships is being proved to be an important factor of winning a war, as in the Ukraine-Russia war. in order to ensure the ability of a warship to perform its duties, the survivability of the warship must be strengthened. In particular, among the survivability factors, vulnerability is closely related to a damage assessment, and these vulnerability data are used as basic data to measure the mission capability. The warship's mission capability is usually measured using a wargame model, but only the operational effects of a macroscopic view are measured with a theater level resolution. In order to analyze the effectiveness and efficiency of a weapon system in the context of advanced weapon systems and equipments, a warship's mission capability must be measured at the engagement level resolution. To this end, not the relationship between the displacement tonnage and the weight of warheads applied in the theater level model, but an engagement level resolution vulnerability assessment method that can specify physical and functional damage at the hit position should be applied. This study proposes a method of measuring a warship’s mission capability by applying the warship vulnerability assessment method to the naval engagement level analysis model. The result can be used as basic data in developing engagement algorithms for effective and efficient operation tactics to be implemented from a single unit weapon system to multiple warships.

우리나라 여러 해양환경 지역으로부터 확보한 370주의 해양세균, 균류, 미세조류로부터 기초생 리활성(항산화, 항염, 항균, 항암, 항바이러스)을 조사하여 채집지, 분리원, 종(種) 수준에서의 활성결과를 비교하였다. 해양세균의 경우, 일반적으로 유용성이 많이 알려진 Streptomyces 속 과 Bacillus 속에 속하는 균주들이 두드러진 강한 효능이 관찰되었고, 주로 해양퇴적물로부터 유용한 자원을 분리할 수 있었다. 해양균류와 미세조류의 경우에도 종 특이적으로 활성이 강 하게 나타나는 결과를 확인할 수 있었고, 효능 특이적으로 활성을 보이는 결과도 얻을 수 있었 다. 이러한 결과를 바탕으로 추후 특정질병에 선택적으로 효능을 보이는 화학물질 연구 또는 자원 기반 연구 수행 시 유용성을 전제로 한 자원 확보 전략 수립과 산업 활성화를 위한 전 략소재로 우선적 접근이 용이할 수 있는 연구결과라 생각된다. 또한, 이들 결과를 해양바이오 뱅크를 통한 분양소재로 활용함으로써 학계, 산업계에서 활용하여 해양바이오산업 활성화에 좀 더 빠른 접근을 도울 수 있다고 생각한다.

이 연구는 초분광 영상으로 두 품종의 콩(청자 3호, 대찬)의 들불병을 진단할 수 있는 모델과 다중분광 영상센서를 개발하기 위해 수행되었다. 무처리구와 들불병 처리구에서 5 nm full width at half maximum (FWHM)으로 구성된 원시 초분광 중심파장들의 콩 식물 영역 반사율들을 추출하여 10 nm FWHM으로 병합한 후, t-test로 차이가 나타난 blue, green, red, red edge, NIR1 및 NIR2 각 영역에서 선정된 대표 밴드로 121개의 식생지수를 계산하였다. 식생지수를 입력변수로 support vector machine (SVM), random forest (RF), extra tree (EXT), extreme gradient boosting (XGB)의 머신러닝 기법과 shapley additive explanation 변수 선택 기법을 적용하여 들불병 진단에 가장 적절한 모델을 선정하고 사용된 식생지수와 파라미터를 나타내었다. T-test 결과 품종에 상관없이 blue 1개(420 nm), green 2개(500, 540 nm), red 1개(600 nm), red edge 2개(680, 700 nm), NIR1 2개(780, 840 nm), NIR2 1개(920 nm)의 총 9개 대표 밴드들이 선택되었고, 성능 평가를 통해 선정된 모델에 청자 3호의 경우 SVM모델(OA=0.86, KC=0.72, 10 VIs)이 선정되었으나 혼동행렬 분석 결과 정상오분류가 적은 RF모델이 선택되었다. RF모델(식 생지수 : RE/Blue, NSI, GDVI, Green/Blue, 파라미터 : max_depth=6, n_estimators=100)은 OA=0.81, KC=0.60, precision=0.86, recall=0.81, F1 score=0.80의 성능을 나타내었다. 대찬은 EXT모델(식생지수 : YVI, RE/Green, 2YVI, 파라미터 : max_depth=8, n_estimators=10)이 선정되 었고, OA=0.86, KC=0.72, precision=0.86, recall=0.86, F1 score=0.86의 성능을 나타내었다.

When an earthquake occurs, the severity of damage is determined by natural factors such as the magnitude of the earthquake, the epicenter distance, soil properties, and type of the structures in the affected area, as well as the socio-economic factors such as the population, disaster prevention measures, and economic power of the community. This study evaluated the direct economic loss due to building damage and the community’s recovery ability. Building damage was estimated using fragility functions due to the design earthquake by the seismic design code. The usage of the building was determined from the information in the building registrar. Direct economic loss was evaluated using the standard unit price and estimated building damage. The standard unit price was obtained from the Korean Real Estate Board. The community’s recovery capacity was calculated using nine indicators selected from regional statistical data. After appropriate normalization and factor analysis, the recovery ability score was calculated through relative evaluation with neighboring cities.

This study analyzes the seismic response of traffic light poles, considering soil-foundation effects through nonlinear static and time history analyses. Two poles are investigated, uni-directional and bi-directional, each with 9 m mast arms. Finite element models incorporate the poles, soil, and concrete foundations for analysis. Results show that the initial stiffness of the traffic light poles decreases by approximately 38% due to soil effects, and the drift ratio at which their nonlinear behavior occurs is 77% of scenarios without considering soil effects. The maximum acceleration response increases by about 82% for uni-directional poles and 73% for bi-directional poles, while displacement response increases by approximately 10% for uni-directional and 16% for bi-directional poles when considering soil-foundation effects. Additionally, increasing ground motion intensity reduces soil restraints, making significant rotational displacement the dominant response mechanism over flexural displacement for the traffic light poles. These findings underscore the importance of considering soil-foundation interactions in analyzing the seismic behavior of traffic light poles and provide valuable insights to enhance their seismic resilience and safety.

Recently, in the case of the root industry, although it is a basic industry that forms the basis of manufacturing competitiveness, there continues to be a shortage of manpower due to reasons such as dangerous working environments, industrial economic difficulties, and low wage systems. In addition, the demand for automation of production lines using robots is increasing due to a shrinking labor market due to a decrease in the working population due to aging, higher wages, shorter working hours, and limitations of foreign workers. In this study, a system was developed to automate the injection molding process for producing ball valves for automobiles by applying robot system. The applied process flow consists of alignment and insertion of insert parts, and removal, transfer, and loading of the product after injection molding, which is currently performed manually. Through the application of the developed robot automation system, the cycle time was improved by more than 30% and the defect rate was reduced by more than 70%.

This study used optical and scanning electron microscopy to analyze the surface oxidation phenomenon that accompanies a γ'-precipitate free zone in a directional solidified CM247LC high temperature creep specimen. Surface oxidation occurs on nickel-based superalloy gas turbine blades due to high temperature during use. Among the superalloy components, Al and Cr are greatly affected by diffusion and movement, and Al is a major component of the surface oxidation products. This out-diffusion of Al was accompanied by γ' (Ni3Al) deficiency in the matrix, and formed a γ'-precipitate free zone at the boundary of the surface oxide layer. Among the components of CM247LC, Cr and Al related to surface oxidation consist of 8 % and 5.6 %, respectively. When Al, the main component of the γ' precipitation phase, diffused out to the surface, a high content of Cr was observed in these PFZs. This is because the PFZ is made of a high Cr γ phase. Surface oxidation of DS CM247LC was observed in high temperature creep specimens, and γ'-rafting occurred due to stress applied to the creep specimens. However, the stress states applied to the grip and gauge length of the creep specimen were different, and accordingly, different γ'-rafting patterns were observed. Such surface oxidation and PFZ and γ'-rafting are shown to affect CM247LC creep lifetime. Mapping the microstructure and composition of major components such as Al and Cr and their role in surface oxidation, revealed in this study, will be utilized in the development of alloys to improve creep life.