With increase in operating temperature of gas turbine for higher efficiency, it is necessary to find new materials of TBC for replacement of YSZ. Among candidate materials for future TBCs, zirconate-based oxides with pyrochlore and fluorite are prevailing ones. In this study, phase structure and thermal conductivities of oxide system are investigated. system are comprised by selecting as A-site ions and as B-site ion in pyrochlore structures. With powder mixture from each oxide, oxides are fabricated via solid-state reaction at . Either pyrochlore or fluorite or mixture of both appears after heat treatment. For the developed phases along compositions, thermal conductivities are examined, with which the potential of compositions for TBC application is also discussed.

This paper reports the microstructures and thermal conductivities of -SiC composite ceramics with size and amount of SiC. We fabricated sintered bodies of -x vol.% SiC (x=10, 20, 30) with submicron and nanosized SiC densified by spark plasma sintering. Microstructure retained the initial powder size of especially SiC, except the agglomeration of nanosized SiC. For sintered bodies, thermal conductivities were examined. The observed thermal conductivity values are 40~60 W/mK, which is slightly lower than the reported values. The relation between microstructural parameter and thermal conductivity was also discussed.

본 연구는 횡성호 및 횡성호 상 하류지역을 대상으로 2010년 4월부터 2010년 11월까지 총 4회에 걸쳐 피라미(Zacco platypus) 개체군의 생태적 특성을 조사하였다. 피라미 개체군의 지역별 동태를 비교한 결과 상류지역에서 1,707개체(78.70%)로 가장 큰 개체군을 유지하고 있는 것으로 나타났다. 피라미 개체군의 전장-체중 상관도 분석 결과 횡성호 일대에 분포하는 피라미 개체군의 회귀계수 b값은 3.28로 비교적 안정적인 서식을 하고 있는 것으로 나타났으며, 지역별로는 상류지역 3.28, 횡성호 3.10, 하류지역 3.09로 상류지역에서 가장 양호한 생육상태를 나타내고 있었다. 비만도 지수는 slope가 0.003으로 안정적인 개체군을 형성하고 있는 것으로 나타났으며, 상류지역 0.003, 횡성호와 하류지역이 0.001로 상류지역에서 가장 양호한 영양상태를 유지하고 있었다. 피라미 개체군을 대상으로 전장크기를 비교한 전장빈도 분포 결과 상류지역은 30~50mm, 70~90mm 사이의 개체가 상대적으로 많이 나타났으며, 횡성호에서는 60~80mm의 개체, 횡성호 하류지역은 70~100mm의 개체가 비교적 풍부하게 분포하는 것으로 조사되었다. 결과적으로 횡성호 일대 피라미 개체군은 상류지역에서 가장 안정된 생육상태를 나타냈으며, 서식조건이 충족될 경우 유수역 및 정수역 모두를 선호하는 것으로 확인되었다.

As operating temperatures of engines or turbines continually increase for higher efficiency, significant amounts of researches have been focused on finding new materials, which would be alternatives to conventional yttria-stabilized zirconia (YSZ) for thermal barrier coatings (TBCs). In this study, phase evolution and thermo-physical properties of pyrochlore systems are investigated for TBC applications. systems are comprised by selecting as A-site ions and as B-site ions in pyrochlore structures. For the developed phases in compositions, thermo-physical properties such as thermal conductivity, thermal expansion coefficient are examined. The potential of these compositions for TBC application is also discussed.

This paper reports the effect of sintering processes and additives on the microstructures and mechanical properties of -SiC composite ceramics. We fabricated sintered bodies of -20 vol.% SiC with or without sintering additive, such as C or , densified by spark plasma sintering as well as hot pressing. While almost full densification was achieved regardless of sintering processes or sintering additives, significant grain growth was observed in the case of spark plasma sintering, especially with . With sintered bodies, mechanical properties, such as flexural strength and Vickers hardness, were also examined.

We investigated the effects of trunk twist on postural stability during manually handling flat ties. Ten male subjects participated in this study. While handling 5kgf and 10kgf bundles of flat ties respectively, their centers of pressure (COPs) were measu

본 연구에서는 홍삼음료의 다양화 및 기능성 강화와 여러 기능성을 가진 황기의 식품으로의 활용에 역점을 두고, 기존의 증점제를 대신하여 동결건조 천년초열매를 첨가한 새로운 기능성 홍삼음료을 개발하고자 하였다. 먼저 높은 항산화활성을 지닌 황기추출물을 얻고자 추출용매의 지용성정도를 달리하면서(100(증류수) : 0(95% 에탄올), 75 : 25, 50 : 50, 25 : 75) 80oC에서 추출한 추출물의 항산화활성을 측정한 결과, ABTS 및 DPPH radical 소거능 실험에서 증류수의 비율이 증가할수록 추출물의 항산화력이 증가하는 것으로 나타났다. 추출용매의 온도에 의한 황기추출물의 항산화활성 차이를 알아보고자 추출용액의 온도를 달리하면서(60, 80oC) 추출한 추출물의 항산화활성을 비교해 본 결과, 80oC에서의 추출물이 증류수와 에탄올혼합비율과는 상관없이 대부분 60oC 추출물보다 높은 값을 나타내었다. 기존의 점증제를 대신하여 다양한 기능성을 함유한 천연물 소재인 천년초분말을 선택하였으며, 구아검용액과 농도별 점도를 비교해 본 결과, 구아검 0.1%(w/v) 용액과 비슷한 점도를 나타내기 위해서는 천년초분말의 경우 1-2%(w/v)의 농도가 필요한 것으로 분석되었다. 황기와 천년초 첨가가 홍삼용액의 저장성(35oC)에 미치는 영향을 조사하기 위하여 이들 용액의 pH와 총미생물수를 7일 동안 측정하였다. 홍삼용액에 황기와 천년초를 첨가한 경우, 저장 1일째부터 pH가 급격히 감소하기 시작하였으며, 저장 3일째에는 pH가 약 3.6까지 떨어진 다음, 저장 6일 이후에는 다소 pH가 증가하였으며, 천년초분말을 첨가한 용액에서는 황기의 농도증가에 의한 유의적 pH 감소는 나타나지 않았다. 천년초를 첨가한 홍삼용액의 경우 황기의 농도와는 상관없이 저장 7일째 미생물의 성장을 관찰할 수 없었으며, 천년초를 첨가하지 않은 시료에 비해 6 log cycle 이상의 큰 살균효과를 나타내었다. 황기(3, 5%, w/v), 천년초(1.2%, w/v)를 함유한 홍삼용액(5%, w/v)이 대장암 및 뇌종양세포 증식에 미치는 영향을 각각 0.5 mg/mL과 1 mg/mL의 농도에서 살펴본 결과, 종양세포에 대한 의미 있는 증식억제효과는 나타나지 않았다.

Thermal barrier systems have been widely investigated over the past decades, in order to enhance reliability and efficiency of gas turbines at higher temperatures. Yttria-stabilized zirconia (YSZ) is one of the most leading materials as the thermal barriers due to its low thermal conductivity, thermodynamic stability, and thermal compatibility with metal substrates. In this work, rare-earth oxides with pyrochlore phases for thermal barrier systems were investigated. Pyrochlore phases were successfully formed via solid-state reactions started from rare-earth oxide powders. For the heat-treated samples, thermo-physical properties were examined. These rare-oxide oxides showed thermal expansion of and thermal conductivity of 1.2~2.4 W/mK, which is comparable with the thermal properties of YSZ.

Ischemia that causes stroke induces inflammation of brain cells and apoptosis and as a result, it influences much on the functional part of a man. The needle electrode electrical stimulation (NEES) that combines acupuncture of oriental medicine with electric therapy of western medicine relieves inflammation of cells and has effect on regrowth of nerve tissues. This study was conducted to verify the influence of NEES on the occurrence of c-Fos of cerebrum after applying NEES to the meridian point, Zusanli (ST 36) of a rats with induced ischemia. Global ischemia was induced by using ligation method on common carotid artery of male Sprague Dawley (SD) rats. The ligation was maintained for 5 minutes and then suture was removed for blood reperfusion. After inducing global ischemia, NEES was done to the left and right meridian points of Joksamri of a rat for 30 minutes after 12 hours, 24 hours, and 48 hours. The findings were as follows. 1. In the result of immunohistochemical method, the number of c-Fos immune response cells significantly decreased (P<.05) in NEES group than the control group (GI) that did not get NEES. 2. In the result of western blotting, the occurrence of c-Fos after 24 hours from the inducement of ischemia significantly decreased (P<.05) in NEES group than the control group (GI) that did not get NEES. Therefore, as the effect of NEES was shown highest after 24 hours from the ischemia, it is suspected that NEES would take important role in early treatment after cerebral stroke.

Si nanowire/multiwalled carbon nanotube nanocomposite arrays were synthesized. Vertically aligned Si nanowire arrays were fabricated by Ag nanodendrite-assisted wet chemical etching of n-type wafers using HF/AgNO3 solution. The composite structure was synthesized by formation of a sheath of carbon multilayers on a Si nanowire template surface through a thermal CVD process under various conditions. The results of Raman spectroscopy, scanning electron microscopy, and high resolution transmission electron microcopy demonstrate that the obtained nanocomposite has a Si nanowire core/carbon nanotube shell structure. The remarkable feature of the proposed method is that the vertically aligned Si nanowire was encapsulated with a multiwalled carbon nanotube without metal catalysts, which is important for nanodevice fabrication. It can be expected that the introduction of Si nanowires into multiwalled carbon nanotubes may significantly alter their electronic and mechanical properties, and may even result in some unexpected material properties. The proposed method possesses great potential for fabricating other semiconductor/CNT nanocomposites.

based composites are candidate materials for ultra-high temperature materials (UHTMs). has become an indispensable ingredient in UHTMs, due to its high melting temperature, relatively low density, and excellent resistance to thermal shock or oxidation. powders are usually synthesized by solid state reactions such as carbothermal, borothermal, or combined carbothermal reaction. SiC is added to this system in order to enhance the oxidation resistance of . In this study, ?based composites were successfully synthesized and densified through two different processing paths. or 25 vol.%SiC was fully synthesized from oxide starting materials with reducing agents after heat treatment at 1400. Besides, ?20 vol.%SiC was fully densified with as a sintering additive after hot pressing at 1900. The synthesis mechanism and the effect of sintering additives on densification of ?SiC composites were also discussed.

전라북도 고창군 상하면 구시포해수욕장 주변에 위치한 곰솔 방풍림을 대상으로 곰솔림의 생장특성을 조사 하였는 바, 그 결과를 요약하면 다음과 같다. 곰솔림의 토양은 모래의 함량이 많은 사토이고, 약산성(pH 5.73)이며, 토양염분농도는 1.42dS/m이다. 곰솔의 흉고직경, 수고, 수관폭, 형상비(수고/흉고직경)는 저밀도 임분, 중밀도 임분, 고밀도 임분의 순으로 양호하였고, 절간생장량은 고밀도 임분일수록 많았다. 특히 저밀도 입목밀도가 낮을수록 수관폭이 크고, 형상비 60 이하인 수목의 비율이 많았다. 이것은 입목밀도가 낮을수록 수목이 건전하게 생장하고 있음을 나타내는 것이다. 많은 수목이 여러 방향으로 기울어져 생육하고 있는데, 이것은 대부분의 수목이 생장 초기 단계에 바람의 영향을 받은 것이고 일부는 태풍의 영향을 받은 것으로 분석되었다. 수목의 기울기 방향의 분포율이 이 지역의 주풍방향과 상관성이 있는 것으로 분석되었다. 이 지역의 모래언덕과 곰솔림 내부에는 총 81분류군의 관속식물이 생육하고 있으며, 목본식물(24분류군)보다 초본류(57분류군)가 더 많았다. 사구식물의 경우 모래언덕이 잘 발달해 있는 명사십리 구역에는 10종류가 출현하였는데, 방파제 축조로 인해 모래언덕이 형성되지 않은 구시포해수욕장 구역은 3종의 사구식물만이 간헐적으로 출현하였다. 이 지역의 곰솔림이 건전하게 성장하고 유지되어 해안방풍림으로서의 기능을 충분히 발휘할 수 있게 하기 위해서는 고밀도와 중밀도 임분에 대한 적정한 간벌이 필요한 상태이다.

In this study, the feasible test for the mechanical property characterization of ceramics and multi-layer ceramic capacitor(MLCC) was performed with nanoindentation technique. In case of ceramics, hardness and elastic modulus are dependent on the densification of specimen showing the highest hardness and elastic modulus values of 12.3 GPa and 155 GPa, respectively at . In case of MLCC chip, hardness of dielectric layer was lower than that of margin region. The nanoindentation method could be useful tool for the measurement of mechanical property within dielectric layer of very thin thickness in high capacitance MLCC

Ti(C,N) solid solutions in hot-pressed Ti() (x=0.0, 0.3, 0.5, 0.7, 1.0) and 40TiC-40TiN-20Ni (in wt.%) cermet were characterized in this study. For hot-pressed Ti(C,N)s, the lattice parameters and hardness values of Ti(C,N) were determined by using XRD (X-Ray Diffraction) and nanoindentation. The properties of hot-pressed Ti(C,N) samples changed linearly with their carbon or nitrogen contents. For the TiC-TiN-Ni cermet, the hardness of the hard phase and binder phase were determined by nanoindentation in conjunction with microstructural observation. The measured hardness values were GPa for the binder phase and GPa for the hard phase, which was close to the hardness of hot-pressed Ti().

The indentation technique has been one of the most commonly used techniques for the measurement of the mechanical properties of materials due to its experimental ease and speed. Recently, the scope of indentation has been enlarged down to the nanometer range through the development of instrumentations capable of continuously measuring load and displacement. In addition to testing hardness, the elastic modulus of submicron area could be measured from an indentation load-displacement (P-h) curve. In this study, the hardness values of the constituent phases in Ti()-NbC-Ni cermets were evaluated by nanoindentation. SEM observation of the indented surface was indispensable in order to separate the hardness of each constituent phase since the Ti()-based cermets have relatively inhomogeneous microstructure. The measured values of hardness using nanoindentation were GPa for hard phase and GPa for binder phase. The effect of NbC addition on hardness was not obvious in this work.

A study was conducted to determine contamination status of fish sold at wholesale market in Seoul. A total of 79 samples (35 different kindry fish) were collected from the wholesale market. E. coli and coliform group bacteria were cultured and tested for sensitivity against antibiotics. The results are summarized as follows; 1. E. coli was isolated from 23 out of 79 samples (29.1%), and coliform groups from 53 out of 79 (67.1%). 2. Of coliform group, Citrobacter freundii was the most common and Enterobacter cloacae was the next. 3. 23 E. coli strains isolated from fishes were resistant to Oxacillin, Erythromycin and Lincomycin, meanwhile 23 E. coli strains were sensitive to Cefoperazone, Ceftazidime, Imipenem, and Ciprofloxacin.

In order to investigate bacterial sanitary condition of fish and shellfish, we examined the normal flora in the 25 species of commercial fish and shellfish, and also proportional change of normal flora by storage period and temperature. Isolated 334 were isolated in the normal fish and shellfish and predominant genera were Pseudomonas (25.2%), Staphylococcus (10%), Acinetobacter (7.2%), Vibrio (6.9%), Micrococcus (5.4%), Aeromonas (5.2%), and Enterobacter (5.2%). In accordance with storage period and temperature, Pseudomonas grew on high ratio at 10℃ steadily, but Proteus had increased proportionally at 20℃ and 30℃. Additionally, Citrobacter, Moganella, and Pasteuralla had increasd, while Achromobacter, Acinetobacter, Yeast, and Micrococcus had decreased by period.