As the demand for p-type semiconductors increases, much effort is being put into developing new p-type materials. This demand has led to the development of novel new p-type semiconductors that go beyond existing p-type semiconductors. Copper iodide (CuI) has recently received much attention due to its wide band gap, excellent optical and electrical properties, and low temperature synthesis. However, there are limits to its use as a semiconductor material for thin film transistor devices due to the uncontrolled generation of copper vacancies and excessive hole doping. In this work, p-type CuI semiconductors were fabricated using the chemical vapor deposition (CVD) process for thin-film transistor (TFT) applications. The vacuum process has advantages over conventional solution processes, including conformal coating, large area uniformity, easy thickness control and so on. CuI thin films were fabricated at various deposition temperatures from 150 to 250 °C The surface roughness root mean square (RMS) value, which is related to carrier transport, decreases with increasing deposition temperature. Hall effect measurements showed that all fabricated CuI films had p-type behavior and that the Hall mobility decreased with increasing deposition temperature. The CuI TFTs showed no clear on/off because of the high concentration of carriers. By adopting a Zn capping layer, carrier concentrations decreased, leading to clear on and off behavior. Finally, stability tests of the PBS and NBS showed a threshold voltage shift within ±1 V.

The purpose of this study was to analyze microstructural changes and evaluate the mechanical properties of TWIP steel subjected to variations in heat treatment, in order to identify optimal process conditions for enhancing the performance of TWIP steel. For this purpose, a homogenization heat treatment was conducted at 1,200 °C for 2 h, followed by hot rolling at temperature exceeding 1,100 °C and cold rolling. Annealing heat treatment is achieved using a muffle furnace in the range of 600 °C to 1,000 °C. The microstructure characterization was performed with an optical microscope and X-ray diffraction. Mechanical properties are evaluated using micro Vickers hardness, tensile test, and ECO index (UTS × Elongation). The specimens annealed at 900 °C and 1,000 °C experienced a significant decrease in hardness and strength due to decarburization. Consequently, the decarburization phenomenon is closely related to the heat treatment process and mechanical properties of TWIP steel, and the effect of the microstructure change during annealing heat treatment.

Okadaic acid (OA) group toxins, including OA and its analogs, such as dinophysis toxins (DTXs), have been reported to cause diarrheal shellfish poisoning (DSP). These toxins are primarily produced by dinoflagellates and are accumulated in bivalves. Recently, the presence of Dinophysis sp., a causative alga of DSP, has been reported along the coasts of Korea, posing a potential risk of contamination to domestic seafood and exerting an impact on both the production and consumption of marine products. Accordingly, the European Food Safety Authority (EFSA) and the World Health Organization (WHO) have established standards for the permissible levels of OA group toxins in marine products for safety management. Additionally, in line with international initiatives, the domestic inclusion and regulation of DTX2 among the substances falling under the purview of management outlined by the 2022 diarrheal shellfish toxin standard have been implemented. In this study, we reviewed the physicochemical properties of OA group toxins, their various exposure routes (such as acute toxicity, genotoxicity, reproductive and developmental toxicity), and the relative toxicity factors associated with these toxins. We also performed a comparative assessment of the methods employed for toxin analysis across different countries. Furthermore, we aimed to conduct a broad review of human exposure cases and assess the international guideline for risk management of OA group toxins.

Silkworms have been developed for food and medicinal purposes, and several silkworm products are commercially available. However, there has been no research on their shelf stability. This study investigated the shelf stability of freeze-dried silkworms during storage at various temperature and humidity conditions, using three lipid oxidation indicators: peroxide, acid, and TBA value. The higher the temperature and relative humidity are, the more significant the three lipid oxidation indicators increase. Among these indicators, the TBA and peroxide values show the highest temperature dependence and humidity dependence, respectively. This study could contribute to the standardization of the shelf life of products made from freeze-dried silkworms.

This study investigated the changes in the cyanogenic glycoside (CN-Glc) content of maesil chung (MC) prepared according to its preparation conditions (i.e., maesil part, sugar type, maesil-sugar mixing ratio, liquid separation) and sugaring-ripening period and the quality characteristics of their products finalized through filtration and heat treatment (85oC, 30 min) with the 6-month ripened MC. The CN-Glc content dramatically decreased when the maesil flesh, isomaltooligosaccharide, maesil:sugar ratio of 5:5, and liquid separation after the 4-month sugaring were applied to the MC production. The CN-Glc content decreased with the ripening period. There was no effect of filtration and heat treatment on the CN-Glc reduction of the MC product. The sugar type predominantly affected the soluble solid and total carbohydrate content of the MC products, and their contents increased in the order of high-fructose corn syrup > sucrose > isomaltooligosaccharide. The MC product at a maesil:sugar ratio of 6:4 exhibited the higher organic acid content. There was no direct association between the total polyphenolic compound content and the preparation conditions of the MC product. Overall, the use of maesil flesh as a maesil ingredient and more than 6-month ripening after liquid separation may be a pivotal factor in producing the cyanogenic glycoside-reduced maesil chung.

The objective of this study was to investigate changes in the cyanogenic glycoside (CN-Glc) content of apricot and plum chungs over the sugaring-ripening period and to evaluate their quality characteristics. The whole and flesh parts of the apricot and plum were mixed with sugar to a mixing ratio of 1:1 (w/w) to prepare their chungs, after which the fruit-sugar mixtures were stored for 13 months. The CN-Glc content dramatically increased within 3-4 months, reached the maximum, and gradually decreased over storage by 13 months. The apricot and plum chungs with seeds exhibited much higher CN-Glc contents than those without seeds. All chungs stored for 10 months were filtrated and treated for 30 min at 85oC to measure their quality characteristics. Similar soluble solid contents (53.4- 53.6oBx) were found in all chungs. The apricot and plum chungs without seeds exhibited the higher concentrations of total carbohydrate, organic acid, and total polyphenolic compounds than those with seeds. In addition, the color of the apricot and plum chungs without seeds was darker and deeper yellow than those with seeds. Overall, the apricot and plum flesh may be better for producing the stone fruit chungs with minimal CN-Glc content and better nutrition.

This study aimed to identify the actual catch situation of offshore dredge gear which is newly regulated in the legislation. It’s also conducted to identify the species composition, weight of the catch including the target species and incidental catches, and to provide the basic information necessary for the resource management of aquatic organisms caught by offshore dredge. During the investigation period (from September 2022 to May 2023), a total of 61 species appeared in the test operation sea of Boryeong, Chungcheongnam-do and Gunsan, Jeollabuk-do, with 31 species of fishes, 11 species of malacostraca, six species of gastropoda, five species of bivalvia, three species of cephalopoda, three species of asteroidea, one species each of asteroidea and holothuroidea appeared. According to the results of the test operation conducted in September and November 2022, the non-catch season of Atrina (Servatrina) pectinata, 1,203 shellfishes were caught out of 2,979 caught in number, showing a bycatch rate of 59.6%, and by weight, 157.9 kg of shellfish was caught out of the total catch of 448.4 kg, showing a bycatch rate of 64.8%. On the other hand, in February and May 2023, the catch season for Atrina (Servatrina) pectinata, 3,692 fishsells were caught out of the 4,232 catches in total, showing a bycatch rate of 12.8%, and by weight, 1,185.0 kg of shellfish was caught out of the total catch of 1,293.2 kg, showing an 8.3% bycatch rate.

막대한 예산이 투입되는 국가연구를 기획·관리·확산하는 연구관리 담당자들은 매우 중요한 인력이나, 역할에 관한 연구는 부족한 실정이다. 본 연구는 연구관리 전문기관 담당자에게 필요한 역량요소를 도출하고 역량의 중요도를 확인하고자 하였다. 이를 위해 4가 지 주요요인과 16개의 하위요인을 도출하였고, AHP 기법을 기반으로 설문조사(연구관리 담 당자와 연구자 90명 대상)를 추진하여 우선순위를 도출하였다. 전체 응답자 기준으로 역량의 중요도는 협력적 태도, 소통능력, 연구지식, 목표관리능력과 신의성실 순으로 확인되었으나, 담당자의 경우, 업무와 관련한 역량(규정지식, 판단능력, 정책지식)이 중요하다고 보는 반면, 연구자들의 경우 자신들을 보다 더 지원해 줄 수 있는 역량(협력적 태도, 소통능력)을 보다 더 중시하는 시각차를 볼 수 있었다. 이번 연구는 전문기관 연구관리 담당자의 채용과 역량 개발에 활용할 수 있을 것으로 사료된다.