The main purpose of this study is to analyse economic feasibility of low-carbon-oriented trawl gear. The results of benefit/cost analysis showed that use of the low-carbon fishing gear is economically feasible. Considering the fuel saving and relatively low CO2 emission by reducing the resistance of gear, net present value by such gear improvement was estimated about 2,430~2,853 million won with the benefit-cost ratio 1.65~1.84 and the internal rate of return 29.18~30.48 percent. Development of low-carbon trawl gear would render significant contributions to reducing CO2 emission in fishing operations and lead to reduce fishing costs due to fuel savings.

One of representative Korean fisheries, jigging and angling has 5,700 vessels for squid and hairtail. Hairtail angling is the most typical fishery in Jeju and has an enormous impact on regional economy. However, the price hike in oil and labor costs triggered the necessity of developing a high efficient and energy saving fish luring lamp in recent times. For that reason, this study aimed to analyze the fishing performance of the aircooled LED lamp targeting hairtail angling fishery. The experiment was conducted from September through October in 2009-2011 for a 9.77 ton of fishing vessel setting up 100 lamps. The fishing performance was tested compared with 6 vessels using metal halide lamps in the same waters. As the LED lamp's performance goes up, different lamps were used in 2008 for 80W, 2009 for 120W and 2011 for 180W respectively. The catch and CPUE of the experimental vessel have gradually increased respectively taking the 4th and 6th place in 2009, the 4th and 2nd place in 2010, the 1st and 1st place in 2011 among the 7 vessels. In summary, the LED fishing lamp showed higher fishing performance than comparison groups. It saved 33% of oil consumption and cut down on operating expenses and greenhouse gases emission.

There are many studies of the biodegradable net for fishing to prevent marine pollution in Korea and the snow crab gill nets is developed effectively. Recently, the biodegradable gill net for fishes is being developed. This study is the experiment of the catch characteristics for the biodegradable flounder gill net. The 8 experiments were carried out using the nylon gill net and the biodegradable gill net in from August to October, 2011 in the southern East Sea. The results obtained from the above approaches are summarized as follows; A total of 16 species was caught with most dominant species of Cleisthenes pinetorum followed by Liparis tanakai, Glyptocephalus stelleri, Buccinum striatissimum and Dasycottus setiger. A total of catch of the nylon net was 342,885g and that of the biodegradable net was 236,857g. Thus catch of the nylon net was 1.45 times more than that of the biodegradable net. The length composition of Cleisthenes pinetorum, caught by the biodegradable net was very similar to that of nylon. As a result of analysis on the effect of submerged time, small fish escaped more easily than large fish as the submerged time is getting longer. And catches of the biodegradable net was less than the nylon net's as higher as wave height. Wave height was more influential factor for fishing capacity than submerged time based on the results of a comparison between catch difference of two kinds of gill nets and catch characteristics.

A net-assembling company for gill net fishing gears makes a design based on the size of nets provided and determines floats, types of weights, and numbers. In addition, through the accurate examination of net weights in the process of fishing gear designing, it can prevent an excessive use of designing costs. The weight of twine can be easily calculated by its thickness differences, but the weight of netting has errors to be calibrated since the weight of netting is not changing exponentially with the changes of number and size of meshes. This study aims to suggest and empirically analyze the methods for estimating the weights of netting in accordance with the changes of number, size and thickness of meshes for a sound management of netting and net-assembling companies. Results indicated that the method using the knots and legs of netting was not practically usable because the errors were increased as the number of mesh increased. However, the method using netting area shown its usage potentiality with the calibration of the increasing ratio of mesh numbers.

Nationally, flatfish vaccination has been performed manually, and is a laborious and time-consuming procedure with low accuracy. The handling requirement also makes it prone to contamination. With a view to eliminating these drawbacks, we designed an automatic vaccine system in which the injection is delivered by a Cartesian coordinate robot guided by a vision system. The automatic vaccine injection system is driven by an injection site location algorithm that uses a template-matching technique. The proposed algorithm was designed to derive the time and possible angles of injection by comparing a search area with a template. The algorithm is able to vaccinate various sizes of flatfish, even when they are loaded at different angles. We validated the performance of the proposed algorithm by analyzing the injection error under randomly generated loading angles. The proposed algorithm allowed an injection rate of 2000 per hour on average. Vaccination of flatfish with a body length of up to 500mm was possible, even when the orientation of the fish was random. The injection errors in various sizes of flatfish were very small, ranging from 0 to 0.6mm.

The monofilament with 0.304mm of diameter was produced using a polybutylene succinate (PBS) resin, and a gill net was made by it. We investigated the impact of heat setting temperature on the mechanical properties, knot state and height of gill net. Heat treatment was carried out using the high pressure steam machine for 20 minutes at temperature of 55℃, 60℃, 70℃ and 75℃. Before heat treatment, the strength and elongation of PBS monofilament were estimated to be 48.1kg/mm2, 23.8% at unknot, 37.6kg/mm2, 18.8% at single knot, 26.6kg/mm2, 22.9% at double knot in dry condition, respectively. The strength and elongation of PBS monofilament with double knot were decreased as heat setting temperature increased, and the decreasing rate of strength was showed to be higher than that of elongation. It was not found any differences in strength and elongation of PBS monofilament yarn with double knot at the 65℃ and 70℃ of heat setting temperature by 5% significance of T-test, but there was a significant difference at the 70℃ and 75℃ of heat setting temperature. The net's height and length from leg to leg appeared no differences at the 70℃ and 75℃ of heat setting temperature. In results, it was investigated that the PBS monofilament gill net with the maximized physical properties could be manufactured at 70℃ of heat setting temperature using a high pressure steam machine for 20 minutes.

The mesh selectivity of a drift net for yellow croaker (Larimichthys polyactis) was examined in field experiments with six different net mesh size (40, 45, 50, 55, 60 and 65mm) from April to December, 2008 in the coastal areas of Jeollanam-do in Korea. The total catch of 6,748 consisted of yellow croaker (n=6,310; 89.1% of total catch), common mackerel (n=158; 5.6%) and other species (n=280; 9.6%). The selectivity curve for yellow croaker was fit by the models of selectivity curve in SELECT method. The optimal mesh size for 50% retention for minimum landing size (191mm) of yellow croaker was estimated as 49.6mm-51mm by selectivity curves. And the bi-normal model for the selectivity curve was found to fit the data best.

This study was conducted to develop energy-efficient LED lamps with an excellent fishing performance for an anchovy scoop net by comparing the functions of 6 different lamps- incandescent, blue LED, green LED, white LED, yellow LED and red LED lamp. We used incandescent and red LED lamps only for the initial test and then excluded because those showed the lowest herding capacity. According to the result, yellow LED showed lower herding capacity in comparison with the blue, green and white one. Although the herding performance of the blue, green and white LED was similar in almost tests, herding speed to the each light was different. The anchovies were gathered into the blue LED as the speed of 39.88cm/s that was the fastest. Green LED was the second as the speed of 33.28cm/s. White LED was the slowest as the speed of 26.73cm/s. We will have field tests because we found the result that yellow LED's herding performance was better than green LED's for 5 seconds comparing after starting in some tests.

This study was performed to develop a video based system which can be used to measure the averaged fish size in a non-intrusive fashion. The design was based on principles of simple stereo geometry, incorporated fish dimensions weight relationships and took into consideration fish movement to lower system costs. As the fish size is an important factor that impacts the economy of an aquaculture enterprise. Size measurements, including fork length, width or height, girth, thickness and mass, can be used to determine fish condition in the fish farm, so the averaged fish size of fish cage needs to consistently monitor in open ocean aquaculture cage. A precision of ±3% for replicate length measurements of a 60cm bar is obtained at distances between 2.0 and 6.0m, and the mean fork length and mean swimming speed of bluefin tuna were estimated to 48.8cm and 0.78FL/s, respectively.

The main purpose of this study is to understand the marketing approaches and strategies that are used to disseminating biodegradable fishing gears and distinguish the cognition and the non-cognition group's attitudes on the product. We used a technology acceptance model for analyzing product attributes and its impacts on fishers' purchase. The result of this research shows that 'perceived usefulness and easiness of use' have positive effect on 'purchase intention,' and then give impacts on 'purchase intention' for the entire respondents. For the cognitive respondents these factors have influence on 'attitude' but they do not affect 'purchase decision.' However, 'perceived usefulness and easiness of use' have much positive impact on 'purchase intention.' In the non-cognition group, the 'perceived intention' and 'company and country of manufacturers' have direct positive effect on 'purchase intention' through 'attitude' and also 'on 'purchase intention.' This research provides some meaningful policy implications on further development and technology marketing of biodegradable fishing gears.

A fishing lamp is fishing gear to gather fish in the night. But the cost of oil which is used to a light fishing lamp, goes significantly up to almost one hundred million won for 50 tonnage vessels and forty million won in case of vessels less than 10 tonnages. This cost has almost taken 30.40% of total fishing costs. As oil price increases, the business condition of the fishery gets worse and worse. Therefore, it is very urgent to develop an economical fishing lamp, to solve the problem of fishery's business difficulty. This research aims at developing a fishing lamp for squid jigging fishery and hairtail angling fishery using the LED, which has excellent efficiency and durability. One fishing lamp has about 160Watt capacity and five fishing lamps are installed one aluminium panel in which sea water flows to emit generated heat from LED to outside. Developed fishing lamp lights to an effective direction of jigging and angling operation. This fishing lamp can be controlled to light the direction of fish shoal because the aluminium panel can be controlled to up and down direction. The wave length of fishing lamp has white and blue color. White color light is to gather fish shoal of horizontal direction and blue color light is to gather fish shoal of vertical direction. After development of this fishing lamp, 60.110 units are established on the boat, and operated fishing. Consequently, in the case of squid jigging, spent energy was reduced to 39%, in the case of hairtail angling, 68% of spent energy was reduced. And the catch was more than another boat.

Biodegradable octopus pot was developed to reduce plastic pollution problem in the sea and fishing trouble between fishermen. It can be expect to recycle other wasted biodegrade fishing gear. Experimental fishing was carried out to understand the difference in fishing efficiency between Polyethylene (PE) octopus pots and biodegradable (Polybutylene Succinate and Polybutylene adipate-co-terephthalate) octopus pots which was tried to make in this study in the sea. There were caught by 237 numbers of fishing during the experimental period. Among the 237 numbers of fishing, 160 or 67.5% were PE pots which were more than the biodegradable pots. A comparison of the monthly catches between the PE pots and biodegradable pots shows that the catches were overall higher in the PE pots than in the other pots. The result is very similar with the comparison of total catches by each type of the pots. In terms of bycatch, the number of species, amount of catches and the number of fishing with bycatch were more significant in the biodegradable pots than in the PE pots.

In order to describe the performance of a wedge type jellyfish excluder device, a series of fishing experiments was carried out in the coastal areas of Yokji Island, southern Korea in 2009, using a trawl net with a cover net. The body size and weight of each individual (fish or jellyfish) caught in the experimental fishing were measured. In the case of giant jellyfish the bell diameter and weight were measured. The catch species was composed of giant jellyfish (Nemopilema nomurai), silver croaker (Pennahia argentata), yellow croaker (Larimichthys polyactics), finespotted flounder (Pleuronichthys cornutus), largehead hairtail (Trichiuruslepturus), melon seed (Psenopsisanomala) and so on. The weight ratio and individual ratio of total fish escaped through the outlet of the excluder device were 0.322 and 0.320, respectively. The weight ratios of giant jellyfish excluded from the trawl net ranged from 0.740 to 0.921 (average 0.852/haul). It means that the wedge type jellyfish excluder device performed well and allowed the most of the giant jellyfish to exclude through the trawl net. The approximately 70% of fish entered in trawl net was caught. The wedge type excluder device needs some improvements to minimize the fish escape from the trawl nets in the future.

For an effective management of fisheries resources, it is very important that to make clean inhabitation environment and to preserve fisheries resources. The material which is mainly used as fishing gear in modern times, is polyethylene, polypropylene, polyamide, etc., chemical fiber. And lost fishing gears which are make of these, occur ghost fishing and ocean pollution. To solve these problem, we development biodegradable fishing trap using the polybutylene succinate (PBS). Developed traps are for red snow crab (Chionoecetes japonicus) and shrimp, major traps in the East Sea, and we carried out fishing research using two kind traps in the coastal sea of Ayajin-port (Goseong) to analysis fishing efficiency of PE trap and PBS trap. As a result for fishing experiment (year 2005-2006) of red snow crab trap, two kind traps were almost the same in catches and length composition. During a experiment, parts of meshes, used for over 1 year, were cut by biodegradation. As a result for fishing experiment (year 2007) of shrimp trap, northern shrimp (Pandalus eous), coonstripe shrimp (Pandalus hypsinotus) and morotoge shrimp (Pandalopsis japonica) were catched, and the almost is northern shrimp. Two kind traps were almost the same in catches and length composition. In accordance with these result, it is recommended that the developed traps are have to commercialized because the fishing powers of PE traps and PBS traps were same. But biodegradation speed is have to controled in consideration of ocean microorganism volume and traps life.

The main purpose of this study is to estimate willingness to pay (WTP) by the general publics, assuming that they pay tax or charge for protecting marine living resources and environment through developing and supplying biodegradable fishing nets. This study employed a contingent valuation method (CVM) which is an econometric method. The survey was conducted by using both double-bounded dichotomous choice and open-ended survey. Tobit model was used for the analysis. The variables included concerns about marine environment and fishing net discarded, sex, age profile, number of family members, educational level and personal disposable income. Annual average WTP per family for the biodegradable fishing net development and supply was estimated at 5,294 won and national WTP amounted to some 84.2 billion won. This includes both of use and non-use value of biodegradable fishing nets.

In order to improve the breaking strength and elongation of Polybutylene succinate (PBS) monofilament, the monofilament was produced by blending PBS and Polybutlyne adipate-co-terephthalate (PBAT). The PBS/PBAT blend monofilament was prepared by the melt spinning system, and the weight ratios of the compositions of PBS/PBAT was 100/0, 95/5, 90/10 and 85/15, respectively. The breaking strength, elongation, softness and crystallization of PBS/PBAT blend monofilament were analyzed by using a tensionmeter, softness measurement, X-ray diffractometer in the both dry and wet conditions. The PBS/PBAT blend monofilaments were spun in the take-up velocity of 1.19m/sec under the drawing ratio of 6.8:1 condition. The production volumes of PBS/PBAT blend monofilaments showed 20% less than that of Nylon. The breaking strength of PBS/PBAT blend monofilaments were decreased as PBAT contents increased, while elongation and softness were increased. In case of PBAT content were over 5%, the breaking strength, elongation and softness of PBS/PBAT blend monofilaments were not shown to increase in spite of increasing in PBAT contents. Based on these results, it was possible to make the monofilaments with the maximized physical properties when the PBAT contents at 5%.

Recently, Fishermen have required to expand the circumference of trap entrance for conger eel because it was difficult to take the catch out as well as to put the baits into. A series of fishing experiments was carried out in coastal areas of Tongyoung, Korea in 2008 and 2009 using the traps to describe the effect of the entrance size on the catch. The experimental traps (five types) were used in filed experiments with four types circumference size traps (140, 180, 220 and 260mm) with mesh size 22mm and another type was used the same one usually using in filed with mesh size 35mm (750mm circumference). The experiment results were, the conger eels of total length 35mm more or so were caught 85, 93, 142 and 176 individual by the experiment traps with mesh size 22mm as increase circumference size from 140mm to 260mm, respectively. And the small conger eels of the total length below 35mm to be prohibited to catch by law were caught 145, 160, 288 and 304 individual according to increase the circumference size of trap, respectively. In addition, in case of the trap with mesh size 22mm, bycatches were 230 - 260 individuals and much more than bycatches of the trap with mesh size 35mm. In conclusion, when we expand the circumference size of trap according to fishermen's requirement, we should review not only economic of fishery but also increasement the bycatch of non-target fishes and small size fishes.