Recent frequent occurrence of urban sinkhole brings a need for the periodic inspection of sewer pipelines. Sewer inspection using a CCTV device needs a lot of time and efforts. Many of previous studies which have focused to reduce the laborious tasks are mainly interested in the developments of image processing S/W and inspection H/W. Nevertheless, there has been no attempt to find meaningful information from the existing CCTV images stored by the sewer maintenance manager. In this paper, we carried out a study about the construction of unfolding image of sewer video image. In general, the analysis results show that the image development is judged to have been well represented. It is expected to be a reference to the basic research of panoramic image.

This study deals with optimized structural analysis of stainless rectangular water reservoirs with 5,000ton capacity for various combined load cases. The objective of this study is to propose most efficient structural models through the comparison of various model cases. In order to perform an optimized analysis, three dimensional finite element analyses are carried out for large sized models. The numerical results obtained provides the detailed size and thickness for optimal design of water reservoir. In particular, results reported in this paper show the influence of various types of loading and dimensions of the wall and stiffened column on the structural behavior of the large sized water tanks.

In this paper, we study the calculation for the damage area of the tension specimens using image processing techniques. This study was able to calculate the area of the damage region on the basis of original image. Generally, to extract the area in the original image, we have to use opening operation, close operation, the Hit-or-Miss operation and bottom hat filter, top hat filter, etc. In particular, to extract the area of the composite specimen discussed in this study, we have to use the combination of the operations and filters because it is non-isotropic material, or should develop a new algorithm based on it.

The finite element analysis of large sized rectangular water tank structures made of stainless steel materials is carried out for various combined load cases. The combined load cases for a large size of 5,000ton are further determined using the specification(KS B　6283) established from the Korean Standards Association. For the better numerical efficiency, the rectangular panels are modelled using the ANSYS program. The numerical results obtained for different load cases show as follows. In order to resist the snow load, it takes the influence of the gap than the size of the column. Also, in order to resist the water pressure, it shall increase the thickness of the wall. But, increasing the thickness of the wall is considerably less economical. Therefore, the angle with big thickness should be placed right next to the wall.

This study performed a finite element stress analysis of pipe system connected by bellows based on APDL(ANSYS Parametric Design Language) customizing. The effects of different shapes of developed pipes for various parameters are studied using the finite element commercial package for this study. The structural behavior of complex pipe structures with bellows was also investigated to study the interactions between bellows and other parts. Based on the ANSYS APDL, the effect of initial axial and lateral displacements, and internal temperature and pressure on the Von Mises stress distribution is also analyzed.

This paper introduces a digital image processing(DIP) method as a method for measuring the displacement of pylon. The comparison of DIP results and ANSYS analysis results verified the validity of the image processing technique. Normalized cross-correlation(NCC) coefficient was used and experiments were performed three times. It shows that the displacement difference was 22% and 5% compared to ANSYS results. Therefore, the image processing method is expected to be able to measure the displacement of pylon sufficiently.

The finite element stress analysis of large sized rectangular water tank structures made of stainless steel materials is carried out for various combined load cases. The combined load cases for a large size of 5,000ton are further determined using the specification(KS B　6283) established from the Korean Standards Association. The changed water capacity due to the size of reservoirs could be heavily dependent for evaluating seismic effects, especially for large reservoirs. For the better numerical efficiency, the rectangular panels are modelled using the ANSYS ADPL module. The numerical results obtained for different load cases mainly show the effect of the interactions between the different load combination and other various parameters, for example, the water capacity, and different stainless steel materials. The structural performance for various load combinations is also evaluated.

In this paper, we study the calculation for the fracture area of the composite material specimens using digital image processing techniques. This study was able to calculate the area of the fracture region through the main operation step 7 on the basis of improved image. To extract the area in the original image, we have to use opening operation, close operation, the Hit-or-Miss operation and Bottom hat filter, Top hat filter, etc. In particular, to extract the area of the composite specimen discussed in this study, we have to use the combination of the operations and filters because it is non-isotropic material, or should develop a new algorithm based on it.

In this paper, we study the calculation for the fracture area of the tension specimens using digital image processing techniques. This study was able to calculate the area of the fracture region on the basis of improved image. To extract the area in the original image, we have to use opening operation, close operation, the Hit-or-Miss operation and Bottom hat filter, Top hat filter, etc. In particular, to extract the area of the composite specimen discussed in this study, we have to use the combination of the operations and filters because it is non-isotropic material, or should develop a new algorithm based on it.

This study analyzes performance-cost ratio of various polycarbonate(PC) pigpen. The finite element models using the ANSYS program described in this paper is attractive not only because it shows excellent accuracy in analysis but also it shows the benefit of parameter study by using APDL. We have performed various parameter study of total 6 models. And we compared and analyzed the results of 6 models. From the numerical examples, we recommend model M2. Model M2 is PC pigpen with steel in PC.

This study analyzes performance-weight ratio of polycarbonate(PC) pigpen and steel pigpen. The finite element models using the ANSYS program described in this paper is attractive not only because it shows excellent accuracy in analysis but also it shows the benefit of parameter study by using APDL. We have performed a parameter study by the width variation of PC pigpen. And we compared and analyzed the results of PC pigpen and steel pigpen. From the numerical examples, we confirmed the validity of PC pigpen.

This study carried out real car crash simulation of composite post structures for road facilities. The effects of different material properties of composites for various parameters are studied using the LS-DYNA finite element program for this study. In this study, the existing finite element analysis of steel post structures using the LS-DYNA program is further extended to study dynamic behaviors of the structures made of various composite materials. The numerical results for various parameters are verified by comparing different models with displacements and stress distribution occurred in the post and car.

This study analyzes performance-cost ratio of composite(GFRP) wind-towers by fiber reinforcement angle and determines their optimal fiber angle. The finite element models for composite structures using the ANSYS program described in this paper is attractive not only because it shows excellent accuracy in analysis but also it shows the effect of the geometrical combination. New results reported in this paper are focused on the significant effects of the cost for various parameters, such as thicknesses of outer shells and stiffeners. From the numerical examples, optimal fiber angles were determined as 80°∼90°.

Deep beam shall be designed either by taking into account nonlinear distribution of strain or by Appendix A of Strut-and-Tie Models (STM ) according to ACI 318(M ) from version of 2002. Although STM is accepted as tool in design Discontinuity region (D-region) which mostly exist in Deep beam, Corbels, Dapped ends etc., it has been modified by many researchers. In this study we design deep beam by STMs which use simple truss for load distribution and the model of complex truss for load distribution compare with the ACI traditional which is designed by flexure design method and shear provided by concrete(Vc) as provided in special provisions section of 11.8 in ACI 318-99 [1]. This study aims to find the different and efficiency of deep beam design based on variation of parameter compiled from many samples selected from ACI traditional and two model of STMs, simple and complex load distribution.

In this study, composite laminate cantilever type cylindrical shells with edge-stiffeners are analyzed. A versatile 4-node flat shell element which is useful for the analysis of shell structures is used. An improved flat shell element is established by the combined use of the addition of non-conforming displacement modes and the substitute shear strain fields. Two models by load conditions are considered. Load type A and B are loaded by point load at the free edge and line load respectively. A various parameter examples are presented to obtain proper stiffened length and stiffened thickness of edge-stiffeners. It is shown that the thickness of shell can be reduced minimum 30% by appropriate edge-stiffeners.

This paper describes an evaluation of the in-service structural performance of a glass fiber-reinforced polymer (GFRP) slab bridge. This first all-GFRP slab bridge was installed in Korea on May 2002. The GFRP slab bridge is a simply supported, its length is 10.0 m, and is designed to carry two-lane traffic and has an overall width of 8.0m. The GFRP slab bridge is a sandwich structure with a corrugated core, fabricated by hand lay-up process with E-glass fibers and vinyl ester resins. The assessment of in-service performance for the GFRP slab bridge in 2004, 2011 includes a field load testing identical to that performed in 2002. The assessment indicates that the GFRP slab bridge has no structural problems and is structurally performing well in-service as expected.