검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 125

        62.
        2014.04 구독 인증기관 무료, 개인회원 유료
        As an offshore wind power turbine is bigger, a new-type supporting structure is required reduce any probability of risk such as its buckling failure. In this study, we analyzed free oscillation of ICH RC wind power tower based on the design sections in the previous study. Also, we checked the safety by resonance between designed ICH RC wind power towers and various commercial wind power turbines. The eigenvalue analysis results showed that the designed ICH RC wind power towers were free from the resonance by turbines.
        3,000원
        63.
        2014.04 구독 인증기관 무료, 개인회원 유료
        In the case of the current ICH RC wind power tower, the design method is getting quite complicated especially if it gets higher. So we, based on the previous basic cross section designs of ICH RC wind power tower, have mapped out the tower structures considering the correlation between their heights and diameters in this research. The cross section dimensions along the tower height were designed according to recommendations of ‘Design Criteria for Concrete design (2012).’ The cross sectional diameter of the wind tower decreases as its location is higher, and this decreasing diameter accorded with the decreasing bending moment. All designed cross sections and tower modules were evaluated of their bending moment capacities and compared with the design moment. The analysis results and comparisons showed that all designed modules satisfied their required capacities.
        3,000원
        64.
        2014.04 구독 인증기관 무료, 개인회원 유료
        Internally confined hollow reinforced concrete (ICH RC) wind power towers were designed for various turbines sizes. Their cross sections were designed to have equal diameters to those of general steel wind power towers corresponding 3.6MW and 5.0MW turbines. And also, the sections with the average diameter of 3.6MW and 5.0MW turbines were designed. For the determined diameters, several cross sections were designed for various hollow ratios. The designed sections were set to have almost equal longitudinal reinforcement ratios. The performance analyses for the designed cross sections were carried out and the analysis results showed that the ICH RC wind power tower had enough strength for the required design loads.
        3,000원
        65.
        2014.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 기존의 회귀분석과는 달리 시계열 분석과 인공신경망 모형을 이용하여 장래 해상교통량을 예측하였다. 특히, 시계열 분석을 통한 예측값을 인공신경망 모형에 추가 입력변수로 적용하여 장래 해상교통량 예측을 제고하고자 하였다. 본 연구는 인천항의 1996년부터 2013년까지 월별 관측값을 대상으로 하였다. 모형의 예측력 검증을 위해 1996년부터 2012년까지 관측값을 대상으로 구축한 모형으로부터 2013년을 예측하여 실제 관측값과의 비교로 적합한 모형을 판별하였다. 인천항의 2015년 장래 해상교통량은 매월 평균 교통량보다 5월과 11월에 각 5.9 %, 4.5 % 많았으며, 1월과 8월은 매월 평균 교통량보다 각 8.6 %, 4.7 % 적은 것으로 예측되었다. 따라서 인천항은 계절에 따른 월별 교통량의 차이를 확인할 수 있다. 본 연구는 해상교통 현장관측 조사시 계절에 따른 교통량의 특성을 반영할 수 있는 기초 자료로 활용될 수 있다.
        4,000원
        66.
        2013.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 기존의 회귀분석과는 달리 금융, 경제, 무역 등 다양한 분야의 수요 예측에 널리 적용되고 있는 시계열 분석 방법을 시도하였다. 인천항의 1996년 1월부터 2013년 6월까지 입항 척수 자료를 바탕으로 정상성 검증, 모형의 식별, 모수의 추정, 진단 과정을 거쳐 장래 해상교통량을 예측하였다. 2014년 1월부터 2015년 12월까지 예측한 결과 2월달의 교통량이 다른 달 보다 적게 예측된 반면, 1월달의 교통량은 다른 달 보다 많을 것으로 나타났다. 또한 인천항은 지수평활법 보다 ARIMA 모형이 적합하며, 계절에 따라 월별 교통량의 차이를 보이는 것을 알 수 있다. 본 연구는 시계열 분석으로 장래 교통량을 월별로 예측하였다는 점에서 의의가 있다. 또한 기존의 회귀분석으로 예측한 장래 해상교통량보다 시계열 분석으로 예측한 장래 해상교통량이 더 적합한 모형인 것으로 판단된다.
        4,000원
        68.
        2013.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 우리나라 전국 무역항 중 입항 선박이 많은 주요 4개 항만을 선정하여 10일간의 AIS 실측 자료를 분석하였다. 실측 조사로 산출한 주요항만의 피크시간 혼잡도는 시간당 평균혼잡도 보다 약 3.8~5.7배 높게 나타났다. 이는 기존의 Port-MIS 통계자료로 울산항 본항의 해상교통혼잡도를 평가한 선행연구 사례에서 피크시간 혼잡도가 시간당 평균혼잡도 보다 약 1.7배 높은 것과는 많은 차이가 있어 현 항로의 교통특성을 왜곡하는 문제를 확인할 수 있다. 따라서 해상교통혼잡도를 평가할 때에는 Port-MIS 통계자료보다 실측조사를 기반으로 해상교통혼잡도를 산출하는 것이 타당하다고 본다.
        4,000원
        70.
        2013.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 냉동저장에 따른 제빵용 밀가루 반죽의물리적 특성 변화를 분석하기 위하여, 냉동생지를 제조 후2주간 -20oC에서 냉동 저장하면서 신장특성, 텍스처, 부피,색상 등의 품질 특성을 측정하고 이를 냉동저장을 하지 않은 대조구와 비교하였다. Extensograph를 활용하여 냉동저장한 밀가루 반죽은 신장도와 신장저항도가 증가하였으며 R/E도 증가함을 확인하였다. 냉동생지를 이용하여 빵을제조한 경우 빵의 부피는 감소하고, 이에 따라 경도는 증가하였고 대조구와 비교하여 어두운 표면이 관찰되었다. 이러한 본 연구의 결과는 냉동 저장 반죽을 이용한 제품제조 시 냉동생지의 물리학적 특성을 파악하여 그 품질을 개선 및 보완하는데 필요한 기초 자료로 활용 될 수 있을 것으로 기대된다.
        4,000원
        75.
        2010.11 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 홍삼음료의 다양화 및 기능성 강화와 여러 기능성을 가진 황기의 식품으로의 활용에 역점을 두고, 기존의 증점제를 대신하여 동결건조 천년초열매를 첨가한 새로운 기능성 홍삼음료을 개발하고자 하였다. 먼저 높은 항산화활성을 지닌 황기추출물을 얻고자 추출용매의 지용성정도를 달리하면서(100(증류수) : 0(95% 에탄올), 75 : 25, 50 : 50, 25 : 75) 80oC에서 추출한 추출물의 항산화활성을 측정한 결과, ABTS 및 DPPH radical 소거능 실험에서 증류수의 비율이 증가할수록 추출물의 항산화력이 증가하는 것으로 나타났다. 추출용매의 온도에 의한 황기추출물의 항산화활성 차이를 알아보고자 추출용액의 온도를 달리하면서(60, 80oC) 추출한 추출물의 항산화활성을 비교해 본 결과, 80oC에서의 추출물이 증류수와 에탄올혼합비율과는 상관없이 대부분 60oC 추출물보다 높은 값을 나타내었다. 기존의 점증제를 대신하여 다양한 기능성을 함유한 천연물 소재인 천년초분말을 선택하였으며, 구아검용액과 농도별 점도를 비교해 본 결과, 구아검 0.1%(w/v) 용액과 비슷한 점도를 나타내기 위해서는 천년초분말의 경우 1-2%(w/v)의 농도가 필요한 것으로 분석되었다. 황기와 천년초 첨가가 홍삼용액의 저장성(35oC)에 미치는 영향을 조사하기 위하여 이들 용액의 pH와 총미생물수를 7일 동안 측정하였다. 홍삼용액에 황기와 천년초를 첨가한 경우, 저장 1일째부터 pH가 급격히 감소하기 시작하였으며, 저장 3일째에는 pH가 약 3.6까지 떨어진 다음, 저장 6일 이후에는 다소 pH가 증가하였으며, 천년초분말을 첨가한 용액에서는 황기의 농도증가에 의한 유의적 pH 감소는 나타나지 않았다. 천년초를 첨가한 홍삼용액의 경우 황기의 농도와는 상관없이 저장 7일째 미생물의 성장을 관찰할 수 없었으며, 천년초를 첨가하지 않은 시료에 비해 6 log cycle 이상의 큰 살균효과를 나타내었다. 황기(3, 5%, w/v), 천년초(1.2%, w/v)를 함유한 홍삼용액(5%, w/v)이 대장암 및 뇌종양세포 증식에 미치는 영향을 각각 0.5 mg/mL과 1 mg/mL의 농도에서 살펴본 결과, 종양세포에 대한 의미 있는 증식억제효과는 나타나지 않았다.
        4,000원
        76.
        2010.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Urokinase-type plasminogen activator (uPA) and plasminogen activator type 1 (PAI-1) inhibitor contribute to the invasiveness of many carcinomas. It will be helpful to study clinical behavior of patients with malignant tumor by analysis of their expression. Expression of uPA and PAI-1 in human salivary gland tumors has been rarely reported in vitro. The purpose of this study were to investigate the protein expression of uPA and PAI-1 in SGT cell line compared to oral SCC and HeLa cell lines and to study migration and adhesion assay. All the cell lines were cultured under DMEM with 10% FBS at at 37oC in a 5% CO2 incubator. We studied a possible association between cytosolic uPA and PA-1 concentrations in SGT cell line compared to any other cell lines through cell migration and adhesion assay, and enzyme-linked immunoassay(ELISA). In migration assay SGT cell line was about 2 .5-4 folds higher than another cell lines. In adhesion assay SGT cell line was about 1.1-2 folds higher than another cell lines. uPA cytosolic concentrations of SGT cell line was about 3-10 folds, while PAI-1 was about 2.5-10 folds. Oral SCC cell lines were the lowest value. Both uPA and PAI-1 concentrations were correlated with migration and adhesion assay. High cytosolic concentrations of uPA and PAI-1 was correlated with migration and adhesion assay. It suggested that these markers might be specific marker for SGT cell line and would be contributed to treatment and prognosis of human salivary gland adenocarcinoma
        4,000원
        78.
        2009.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        We have tested the stability of paeoniflorin, a new cosmetic ingredient, extracted from the roots of Paeoniae lactiflora. The stability of aqueous paeoniflorin solution at pH 3, 5 and 7 varied by adding buffer solution was tested at 0℃, 25℃, 40℃, and 65℃. The test was performed with or without UV light. The solution of paeoniflorin was stable at pH 3.0, however, the recovery rate of paeoniflorin was 40% at pH 7.0. The stability of paeoniflorin solution was decreased as the pH of paeoniflorin solution was increased by pH 7.0. The effect of storage temperature of paeoniflorin solution shows that the stability of paeoniflorin solution was decreased as the temperature was increased. The stability of paeoniflorin was rather good under UV light than the condition given above 40℃. The stability of paeoniflorin in W/O emulsions shows similar pattern to that of aqueous solution.
        4,000원
        79.
        2008.07 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        We have fabricated and evaluated newNew high high-efficiency green green-light light-emitting phosphorescent devices with an emission layer of [TCTA/TCTA1/3TAZ2/3/TAZ] : Ir(ppy)3 were fabricated and evaluated, and compared the electroluminescence characteristics of these devices were compared with the conventional phosphorescent devices with emission layers of (TCTA1/3TAZ2/3) : Ir(ppy)3 and (TCTA/TAZ) : Ir(ppy)3. The current density, luminance, and current efficiency of the a device with an emission layer of (80Å-TCTA/90˚Å-TCTA1/3TAZ2/3/130Å-TAZ) : 10%-Ir(ppy)3 were 95 mA/cm2, 25000 cd/m2, and 27 cd/A at an applied voltage of 10 V, respectively. The maximum current efficiency was 52 cd/A under the a luminance value of 400 cd/m2. The peak wavelength and FWHM (FWHM (full width at half maximum) in the electroluminescence spectral were 513 nm and 65 nm, respectively. The color coordinate was (0.30, 0.62) on the CIE (Commission Internationale de I'Eclairage) chart. Under the a luminance of 15000 cd/m2, the current efficiency of the a device with an emission layer of (80Å-TCTA/90Å-TCTA1/3TAZ2/3/130Å-TAZ) : 10%-Ir(ppy)3 was 34 cd/A, which has beenshowed an improvement of improved 1.7 and 1.4 times compared to those of the devices with emission layers of (300Å-TCTA1/3TAZ2/3) : 10%-Ir(ppy)3 and (100Å-TCTA/200Å-TAZ) : 10%-Ir(ppy)3, respectively.
        4,000원
        1 2 3 4 5