Ammonia (NH3) is a basic gas in the atmosphere and is known to play an important role in producing adverse health and environmental effects. Atmospheric NH3 causes stunted livestock growth, decreased visibility, and induces lung diseases when high concentrations occur. In addition, atmospheric NH3 reacts with acidic species (sulfuric acid, nitric acid, etc.) and produces secondary inorganic aerosol. In this study, the NH3 concentration and ventilation of Rooms 1 to 3 inside a sow facility were measured during the period from March 25 to May 31, 2021. It was difficult to conduct long-term field experiments at housing where pigs are raised. However, in order to improve the accuracy and reliability of the data, repeated experiments were conducted in three pig rooms in the same environment. The average concentration of NH3 in Rooms 1 to 3 was measured to be 7.6 ± 2.7 ppm, 8.2 ± 2.8 ppm, and 8.2 ± 2.7 ppm, respectively. The average internal temperatures were 21.0 oC, 21.2 °C, and 21.8 °C, and the internal humidity was 49.3%, 49.2%, and 49.2%, respectively. The ventilation per pig in Rooms 1 to 3 was measured as 60.4m3/hour∙pig, 62.5m3/hour∙pig, and 64.9m3/hour∙pig, respectively. At this time, NH3 emissions from Rooms 1 to 3 were found to be 6.9 ± 0.8 g/day∙pig, 7.9 ± 1.5 g/day∙pig, and 8.2 ± 1.3 g/day∙pig, respectively. As a result of the correlation analysis, the NH3 concentration was analyzed as producing a negative correlation between the ventilation (r=-0.73) and the internal temperature (r=-0.60) increase. Finally, as a result of calculating the national NH3 emission factor, the NH3 emission of one sow room in spring was 7.7 ± 1.4 g/day∙pig, and the NH3 emission of one year was 2.8 kg/ year∙pig.

This paper presents the torque ripple reduction control to apply an SRM to the X-by-wire drive systems which replaces the mechanical control method with “by-wire” to secure the flexibility of design and modification. However, torque ripples generated from the SRM can affect the performance and stability of the system. The proposed torque ripple control schemes are compared with the previously studied methods by dynamic simulation in regards to torque distribution functions and instant torque controller.

This study aimed to evaluate the changes in the content of functional components and antioxidant activity of rice and barley according to the milling process used. A considerable amount of γ-oryzanol was observed in unmilled rice and barley. However, γ-oryzanol was not detected in the rice and barley after the milling process. The highest content of γ-aminobutyric acid (GABA) was observed in the unmilled Keunalbori-1-ho barley. The contents of biotin in all samples also decreased in the milled grains compared to the unmilled grains. The highest content of total polyphenols and flavonoids was observed in the Heuksujeongchal barley, and the highest radical scavenging activity was also found in this grain. The milling process led to a decrease in the content of functional components, including γ-oryzanol, GABA, biotin, polyphenols, and flavonoids in both rice and barley. These results may be useful in the development of processed foods using cereal grains.

Purpose: 본 연구의 목적은 4주기간동안 횡격막 호흡을 적용한 기구 필라테스 운동이 20대 성인의 유연성, 복부 근 두께, 근육량, 체지방, 호흡에 미치는 영향에 대해 알아보고자 하는 것이다. Methods: 근골격계 질환이 없는 대상자 35명을 대상으로 수행하였으며, 횡격막 호흡을 하는 그룹과 횡격막 호흡을 하지 않는 그룹으로 나누었으며, 두 그룹 모두 필라테스를 수행하였다. 실험에 사용한 기기로는 Ultrasonography(US), Pulmonary function tests(FEV1 / FVC), Bioeletic Impedance Analysis, Sit and reach test를 사용하였다. 정규성 검증을 실시한 후, 반복측정분산분석 (repeated measures of ANOVA)를 사용하여 운동 전, 호흡을 적용한 운동, 호흡 비적용 운동을 비교하였다. 사후 분석을 위해 Fisher’s LSD를 실시하였다. Results: 필라테스 운동은 복근의 두께와 유연성에 긍정적인 영향을 미쳤습니다. SaR test는 운동 전과 호흡을 적용한 운동과 호흡을 적용하지 않은 운동 사이에 유의한 유의성을 보였다(P <0.05). 근육두께 측정 TRA, EO, IO 모두 운동 전보다 호흡 적용 운동과 비호흡 운동에서 유의한 차이가 있었고(P <0.05), TRA와 IO에서는 추가 시간 사이에 유의한 차이가 없었다. 호흡하지 않는 운동(P >0.05). 그러나 EO에서는 호흡운동을 추가한 시간과 호흡운동을 하지 않은 시간 사이에 유의한 차이가 있었다( P <0.05). Conlusion: 결론적으로, 횡격막 호흡을 이용한 필라테스 운동과 횡격막 호흡이 없는 필라테스 운동은 복근의 두께와 유연성에 긍정적인 영향을 미치는 것으로 나타났다. 그러나 횡격막 호흡과 비횡격막 호흡 사이에는 큰 차이가 없었다.

This study examines the effects of different cooking methods (stir-frying, steaming, superheated-steaming) on the contents and the true retention of moisture, water-soluble vitamins, and bioactive compounds of ten selected vegetables: broccoli, brussels sprout, cabbage, eggplant, green bean, onion, red cabbage, red onion, squash, and tomato. The total color difference (ΔE) values were decreased after stir-frying the samples, except for eggplant, green bean, and tomato. The true retention of water-soluble vitamins (B1, B2, B3, and C) was increased in most vegetables after superheated-steaming, as compared to steaming and stir-frying. Moreover, compared to the uncooked vegetables, a higher true retention of total polyphenol and flavonoid was obtained for most vegetables subsequent to superheated-steaming. Total anthocyanin content was detected only in eggplant, red cabbage, and red onion, and a smaller loss of anthocyanin was determined after subjecting red cabbage to superheated-steaming. Also, the free radical scavenging activities were higher in superheatedsteaming vegetables, except in eggplant and squash. These results indicate that superheated-steaming induces a positive effect for retaining water-soluble vitamins and functional components of vegetables.

Conventionally, metal materials are produced by subtractive manufacturing followed by melting. However, there has been an increasing interest in additive manufacturing, especially metal 3D printing technology, which is relatively inexpensive because of the absence of complicated processing steps. In this study, we focus on the effect of varying powder size on the synthesis quality, and suggest optimum process conditions for the preparation of AlCrFeNi high-entropy alloy powder. The SEM image of the as-fabricated specimens show countless, fine, as-synthesized powders. Furthermore, we have examined the phase and microstructure before and after 3D printing, and found that there are no noticeable changes in the phase or microstructure. However, it was determined that the larger the powder size, the better the Vickers hardness of the material. This study sheds light on the optimization of process conditions in the metal 3D printing field.

국내 유통되는 반려동물 사료의 살모넬라 분석시 증균 배양법, 효소면역기법에 의한 분석, 종 특이 primer를 활 용한 PCR 방법을 활용하여 비교 평가하였다. 시료 175점 Salmonella spp. 검출 결과 증균배양법 및 종 특이 primer를 활용한 PCR 방법에 의한 검출 방법에서 2점의 시료(육포, 옥수수 글루텐)가 양성으로 확인되었고, 효소면역기법에 의한 검출방법에서는 1점의 시료(옥수수 글루텐)가 양성 으로 확인되었다. 증균배양법 및 효소면역기법에 의한 검 출방법에 비해 종 특이 primer를 활용한 PCR 방법을 적 용 할 경우 시료에서 분리된 균주의 종(species) 판별이 가 능하였다.

This paper proposes predictive deadbeat current control, one of the model predictive controls. The predictive deadbeat control is compared to the conventional current control methods to validate its feasibility in X-by-Wire systems.

This study investigates the effect of process stopping and restarting on the microstructure and local nanoindentation properties of 316L stainless steel manufactured via selective laser melting (SLM). We find that stopping the SLM process midway, exposing the substrate to air having an oxygen concentration of 22% or more for 12 h, and subsequently restarting the process, makes little difference to the density of the restarted area (~ 99.8%) as compared to the previously melted area of the substrate below. While the microstructure and pore distribution near the stop/restart area changes, this modified process does not induce the development of unusual features, such as an inhomogeneous microstructure or irregular pore distribution in the substrate. An analysis of the stiffness and hardness values of the nano-indented steel also reveals very little change at the joint of the stop/restart area. Further, we discuss the possible and effective follow-up actions of stopping and subsequently restarting the SLM process.

The severity of acute pancreatitis (AP) is classified into mild, moderately severe, and severe, considering the presence and duration of organ failure and local complications. Since patients with AP show a large difference in mortality and morbidity according to AP severity, evaluation of the severity of patients with AP in the early stage is important for predicting the prognosis and determining treatment plans including transfer to the intensive care unit or advanced facilities. In order to evaluate the initial severity of AP, it is necessary to confirm the presence of organ failure and objective evaluation using imaging or clinical examinations. In this guideline, it is recommended that evaluation using various severity indices such as bedside index for severity in acute pancreatitis (BISAP), systemic inflammatory response syndrome (SIRS), and acute physiology and chronic health evaluation (APACHE)-II scores be considered.

There is general acceptance that a diagnosis of acute pancreatitis requires two of the following three features: 1) epigastric or upper abdominal pain characteristic of acute pancreatitis, 2) serum amylase and/or lipase ≥3 times the upper limit of normal, and 3) characteristic findings of acute pancreatitis on abdominal images such as ultrasonography, computed tomography (CT) or magnetic resonance imaging. Other pancreatic diseases and acute abdomen have been ruled out before making a diagnosis of acute pancreatitis. Serum lipase may be more useful than serum amylase because serum lipase is thought to be more sensitive and specific than serum amylase in the diagnosis of acute pancreatitis. Contrast-enhanced CT scan is the best imaging technique to rule out the conditions that masquerade as acute pancreatitis, to diagnose the severity of acute pancreatitis, and to identify complications of pancreatitis. The etiology of acute pancreatitis should be made clear as soon as possible to decide treatment policy of acute pancreatitis or to prevent the recurrence of pancreatitis. The etiology of acute pancreatitis in an emergency situation should be assessed by clinical history, laboratory tests such as serum liver function tests, measurement of serum calcium and serum triglycerides and ultrasonography. A differentiation of gallstoneinduced acute pancreatitis should be given top priority in its etiologic diagnosis because early endoscopic retrograde cholangiopancreatography should be considered if a complication of cholangitis and a prolonged passage disorder of the biliary tract are suspected.

In this paper, 1kW prototype PCS for tidal power generation system, which is attracting attention as the next-generation renewable energy, is studied. Tidal power generation is a method of producing energy using the difference between the tides. The advantage of tidal generators is that, unlike other renewable energies such as wave power, wind power, and solar power, they are relatively less affected by the weather changes and are regularly produced at regular intervals.

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. Despite the development of technology for fast screen signal processing, it is very difficult to compose a high-quality screen due to the limitation of blinking driving due to the long afterglow time of the backlight. As the Single-LVDS signal system evolves from the Quad Signal Package to respond to 3D, the problem of processing faster signals within a set time is occurring. is becoming In this study, the aim was to realize this operation within 1 frame time by using the blinking backlight, and the existing cold cathode tube lamp was used as the light source. In general, cold cathode tube lamps have a long afterglow time of green, which is responsible for the main emission wavelength, so it is difficult to realize the above characteristics. A backlight capable of flickering within the time frame of the video frame was manufactured, and by using it, it was possible to confirm the effect of resolving the afterimage in a moving image by leaps and bounds.

This study was conducted to find out the optimal solvent extraction method [Distilled water (DW), 70% ethanol, 99% ethanol] of mushrooms, including Pleurotus ostreatus (Jacq.) Que, Pleurotus eryngii and Flammulina velutipes and improve their usability as natural antioxidants. To analyze antioxidant activities in each mushroom, total polyphenol, flavonoid contents, 2,2-Diphenyl-1-picrylhydrazyl (DPPH), 2,2?-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) cation radical (ABTS+) and fluorescence recovery after photobleaching (FRAP) were measured. All mushrooms showed the highest total polyphenol contents in DW mushroom extract (p<0.001). Total flavonoid contents were the highest in P. eryngii and F. velutipes DW and 70% ethanol mushroom extracts (p<0.05). All mushrooms showed the highest activities using DPPH and FRAP assays in the DW extraction method (p<0.001). P. ostreatus (Jacq.) Que and P. eryngii showed the highest ABTS+ radical scavenging activity in the DW extraction method, and F. velutipes showed the highest activity in the 70% ethanol extraction method (p<0.001). As a result of comparing IC50 values of DPPH and ABTS+ radicals and FRAP EC50 values, the DW P. ostreatus (Jacq.) Que extract showed high antioxidant activities (p<0.001). Pearson's correlation between total polyphenol contents and antioxidant activities showed a positive correlation in all mushrooms (p<0.01). Therefore, extraction of the mushrooms with DW can enhance the extraction of effective bioactive substances and antioxidant activity.

Energy storage systems should address issues such as power fluctuations and rapid charge-discharge; to meet this requirement, CoFe2O4 (CFO) spinel nanoparticles with a suitable electrical conductivity and various redox states are synthesized and used as electrode materials for supercapacitors. In particular, CFO electrodes combined with carbon nanofibers (CNFs) can provide long-term cycling stability by fabricating binder-free three-dimensional electrodes. In this study, CFO-decorated CNFs are prepared by electrospinning and a low-cost hydrothermal method. The effects of heat treatment, such as the activation of CNFs (ACNFs) and calcination of CFO-decorated CNFs (C-CFO/ACNFs), are investigated. The C-CFO/ACNF electrode exhibits a high specific capacitance of 142.9 F/g at a scan rate of 5 mV/s and superior rate capability of 77.6% capacitance retention at a high scan rate of 500 mV/s. This electrode also achieves the lowest charge transfer resistance of 0.0063 Ω and excellent cycling stability (93.5% retention after 5,000 cycles) because of the improved ion conductivity by pathway formation and structural stability. The results of our work are expected to open a new route for manufacturing hybrid capacitor electrodes containing the C-CFO/ACNF electrode that can be easily prepared with a low-cost and simple process with enhanced electrochemical performance.

서론 : 본 연구는 미국의 운전면허 가이드라인을 고찰하여 국내 조건부면허 제도의 개선에 사용 할 수 있는 기초 자료를 제공하고자 한다. 연구 방법 : 미국의 운전면허 제도에 대한 문헌을 중심으로 고찰 하였으며, 미국의 주 마다 시행하고 있는 운전면허 제도를 확인하여 조사하였다. 결과 : 미국은 주 마다 면허 갱신제도와 시력검사, 시야검사, 제한면허의 종류, 차량 보조도구, 의료 및 운전 평가자, 면허 평가자 교육에 대해 다른 제도를 가지고 있으며, 운전 평가의 경우 많은 주에서 의사, 시력전문가 뿐만 아니라 재활전문가 또는 작업치료사에게 의뢰를 하고 있다. 결론 : 미국의 사례처럼 국내에서도 운전재활전문가로 작업치료사가 필요하며 이에 맞는 사회 제도적 방안과 교육 프로그램을 진행하여 다양한 연구가 이루어져야 할 것 이다.

The purpose of this study is to compare short-term price predictive power among ARMA ARMAX and VAR forecasting models based on the MDM test using monthly consumer price data of frozen mackerel. This study also aims to help policymakers and economic actors make reasonable choices in the market on monthly consumer price of frozen mackerel. To analyze this study, the frozen wholesale prices and new consumer prices were used as variables while the price time series data were used from December 2013 to July 2021. Through the unit root test, it was confirmed that the time series variables employed in the models were stable while the level variables were used for analysis. As a result of conducting information standards and Granger causality tests, it was found that the wholesale prices and fresh consumer prices from the previous month have affected the frozen consumer prices. Then, the model with the highest predictive power was selected by RMSE, RMSPE, MAE, MAPE, and Theil’s inequality coefficient criteria where the predictive power was compared by the MDM test in order to examine which model is superior. As a result of the analysis, ARMAX(1,1) with the frozen wholesale, ARMAX(1,1) with the fresh consumer model and VAR model were selected. Through the five criteria and MDM tests, the VAR model was selected as the superior model in predicting the monthly consumer price of frozen mackerel.

한문 문언문 교육은 서구에서 독립된 교과로 개설되어 있는가? 아니면 고급 중국어로서 언어 교육의 일환으로 시행되고 있는가? “고립어”의 특징을 가진 한문 문언문을 전혀 다른 언어전통을 가진 독자들은 어떤 시각으로 이해하고 있을까? 본 논문은 구미의 고등교육에서 한문교육이 어떻게 이루어지고 있는지를 탐구하였다. 다양한 학습경험을 가진 10인의 신진연구자를 인터뷰하여 실증적인 방법으로 북미와 호주, 그리고 유럽의 한문 교육 동향을 파악하였다. 나아가 각각의 뚜렷한 특성 을 가진 교재 3종을 선정하여 편집자의 철학과 한문 분석 방법론, 수록 작품 등을 분석하였다. 한자 문화권 밖 타자의 시선을 통해 더욱 선명히 드러나는 한문의 언어적 역사적 다층성과 텍스트 전통을 주목하면서, “낯설게하기” 방법론을 차용하여 향후 한국의 교육교재 개발에 응용할 수 있는 가능성도 제시해 보았다.