동반성장은 경제적 불평등을 극복하고 대기업과 중소기업 간 지속가능한 성장을 추구하는 한국형 포용적 성장 으로 이는 기업의 사회적 책무이자 경쟁전략이다. 한국중부발전은 해외사업 거점 국가인 인도네시아에 찌레본과 탄중자티 화력발전소 등 5개 발전소를 건설․운영하고 있으며 이들을 협력 중소기업의 수출 전진기지로 활용하여 국내 중소기업의 정비․기자재 수출을 지원하고 있다. 본 연구는 한국중부발전의 동반성장 노력과 차별적 발전모 델을 탐색하고 해외동반진출의 실제 적용 사례를 공유하고자 한다. 이를 위해 한국중부발전의 동반성장 패러다임 변화를 살펴보고 한국중부발전 고유의 중소기업 동반성장 플랫폼인 K-장보고 프로젝트와 지역사회 공헌 사례를 분석한다. 한국중부발전은 해외동반진출협의회를 구성하고 코미포 아시아와 코미포 팩토리를 활용하여 동반성장 기회를 제공함으로써 협력 중소기업의 해외진출을 견인하는 한편, 국내 우수중소기업과의 동반자적 관계를 바탕 으로 운영수익 극대화를 추구할 수 있었다. 본 연구는 네트워크 이론이 시사하는 협력관계를 통한 기업 간 자원 확보와 실질적 성과 개선 사례를 탐색함으로써 성공적인 동반성장을 위한 전략을 도출한다.

Porous ceramics have the advantages of low density, low thermal conductivity, and excellent mechanical properties. Among porous ceramic manufacturing methods, the replica template method allows the easy manufacturing of porous filters with the highest porosity and pores of the desired size, but it also has the disadvantage that the resulting filters have low mechanical strength. To overcome this shortcoming, mullite (3Al2O3·2SiO2) whiskers, which have excellent thermal stability and high mechanical strength, were introduced in porous ceramic structure. The mullite whiskers were synthesized using a composition of Al2O3, flyash and MoO3. The morphologies and crystal structures of the mullite whiskers with MoO3 contents were investigated in detail. When the porous ceramic with mullite whiskers was fabricated using 20 wt% MoO3 catalyst the most uniform microstructure was obtained, and the mullite whiskers showed the highest aspect ratio of 47.03. The porosity and compressive strength of the fabricated porous ceramic were 82.12% and 0.83 MPa, respectively.

The purpose of this study is to provide information about annual variations in catch size and changes in reproductive biology in the common octopus, Octopus vulgaris, a commercially important species in Jeju Island. Samples were collected from coastal waters of Jeju Island, Korea by coastal trap fishery from January to November 2021. Octopus vulgaris have been decreasing in this region since 1984. The mantle length (ML) ranged from 4.5 to 17.8 cm and body weight (BW) ranged form 88.5 to 2,657.5 g. A χ 2 -test revealed that the number of males was significantly greater than females (χ 2 = 32.712, df = 10, P<0.05). Mature females were found from January to July and male occurred January to August. The gonadosomatic index value was higher from July to August than other months. The relationship between mantle length and body weight was BW = 2.4527ML 2.3139 (female) and BW = 2.6785ML 2.3159 (male). At 50% group maturity, female and male average weight was estimated to be 554.7 g and 330.6 g, respectively.

In this study, defects generated in the YSZ coating layer of the IN738LC turbine blade are investigated using an optical microscope and SEM/EDS. The blade YSZ coating layer is composed of a Y-Zr component top coat layer and a Co component bond coat layer. A large amount of Cr/Ni component that diffused from the base is also measured in the bond coat. The blade hot corrosion is concentrated on the surface of the concave part, accompanied by separation of the coating layer due to the concentration of combustion gas collisions here. In the top coating layer of the blade, cracks occur in the vertical and horizontal directions, along with pits in the top coating layer. Combustion gas components such as Na and S are contained inside the pits and cracks, so it is considered that the pits/cracks are caused by the corrosion of the combustion gases. Also, a thermally grown oxide (TGO) layer of several μm thick composed of Al oxide is observed between the top coat and the bond coat, and a similar inner TGO with a thickness of several μm is also observed between the bond coat and the matrix. A PFZ (precipitate free zone) deficient in γ' (Ni3Al) forms as a band around the TGO, in which the Al component is integrated. Although TGO can resist high temperature corrosion of the top coat, it should also be considered that if its shape is irregular and contains pore defects, it may degrade the blade high temperature creep properties. Compositional and microstructural analysis results for hightemperature corrosion and TGO defects in the blade coating layer used at high temperatures are expected to be applied to sound YSZ coating and blade design technology.

In this study, the removal efficiency of PFCs(perfluorinated compounds) in the GAC(granule activated carbon) process based on the superheated steam automatic regeneration system was investigated in laboratory scale and pilot-scale reactor. Among PFCs, PFHxS(perfluorohexyl sulfonate) was most effectively removed. The removal efficiency of PFCs was found to be closely related to the EBCT, and the removal efficiencies of PFOA(perfluorooctanoic acid), PFOS(perfluorooctyl sulfonate), and PFHxS were 43.7, 75, and 100%, respectively, under the condition of EBCT of 6 min. Afterward, PFOA, PFOS, and PFHxS exhibited the earlier breakthrough time in the order. After that, GAC was regenerated, and the removal efficiency of the PFCs before and after regeneration was compared. As a result, it was shown that the PFCs removal efficiency in the regenerated GAC process were higher, and that of PFOA was improved to 75%. The findings of this study indicate the feasibility of the superheated steam automatic regeneration system for the stable removal of the PFCs, and it was verified that this technology can be applied stably enough even in field conditions.

The purpose of this study is to monitor the pesticide residues in frozen fruits and vegetables distributed and sold in online and offline markets in Korea. For the study, 107 samples of 34 types of frozen fruits and vegetables were examined, and a total of 341 pesticide residues were analyzed by using multiclass pesticide multiresidue methods of the Korean Food Code. As a result, pesticide residues were detected from 16 of 64 frozen fruits samples and 15 of 43 frozen vegetables samples. Conclusively, residues were detected from 31 samples in total, showing a detection rate of 29.0%. Specifically, pyridaben exceeded the Maximum Residue Limits (MRLs) based on the Positive list system (PLS) in one of the frozen radish leaves, and the violation rate was 0.9%. Detection on frozen fruits and vegetables was made 23 times for 11 types and 36 times for 21 types. In total, 28 types of pesticide residues were detected 59 times. Fungicides were detected the most in frozen fruits, while insecticides were detected the most in frozen vegetables. The most detected pesticides were the insecticide, acaricide chlorfenapyr (5) and the fungicide boscalid (5). Chlorfenapyr was detected only in frozen vegetables, and boscalid was detected in frozen fruits except one.

This study aimed to investigate the validation and modify the analytical method to determine quercetin- 3-o-gentiobioside and isoquercitrin in Abelmoschus esculentus L. Moench for the standardization of ingredients in development of functional health products. The analytical method was validated based on the ICH (International Conference for Harmonization) guidelines to verify the reliability and validity there of on the specificity, linearity, accuracy, precision, detection limit and quantification limit. For the HPLC analysis method, the peak retention time of the index component of the standard solution and the peak retention time of the index component of A. esculentus L. Moench powder sample were consistent with the spectra thereof, confirming the specificity. The calibration curves of quercetin-3-o-gentiobioside and isoquercitrin showed a linearity with a near-one correlation coefficient (0.9999 and 0.9999), indicating the high suitability thereof for the analysis. A. esculentus L. Moench powder sample of a known concentration were prepared with low, medium, and high concentrations of standard substances and were calculated for the precision and accuracy. The precision of quercetin-3-o-gentiobioside and isoquercitrin was confirmed for intraday and daily. As a result, the intra-day precision was found to be 0.50-1.48% and 0.77-2.87%, and the daily precision to be 0.07-3.37% and 0.58-1.37%, implying an excellent precision at level below 5%. As a result of accuracy measurement, the intra-day accuracy of quercetin-3-o-gentiobioside and isoquercitrin was found to be 104.87-109.64% and the daily accuracy thereof was found to be 106.85-109.06%, reflecting high level of accuracy. The detection limits of quercetin-3-o-gentiobioside and isoquercitrin were 0.24 μg/mL and 0.16 μg/mL, respectively, whereas the quantitation limits were 0.71 μg/mL and 0.49 μg/mL, confirming that detection was valid at the low concentrations as well. From the analysis, the established analytical method was proven to be excellent with high level of results from the verification on the specificity, linearity, precision, accuracy, detection limit and quantitation limit thereof. In addition, as a result of analyzing the content of A. esculentus L. Moench powder samples using a validated analytical method, quercetin-3-o-gentiobioside was analyzed to contain 1.49±0.01 mg/dry weight g, while isoquercitrin contained 1.39±0.01 mg/dry weight g. The study was conducted to verify that the simultaneous analysis on quercetin-3-o-gentiobioside and isoquercitrin, the indicators of A. esculentus L. Moench, is a scientifically reliable and suitable analytical method.

다가구주택 필로티기둥은 전이구조 형식으로 되어 있어 지진하중에 대하여 전단파괴가 발생하기 쉽다. 이에 따라 내 진설계기준은 강화되고 있지만 이전에 지어진 건축물의 경우 내진보강이 필요한 실정이다. 하지만 기존 습식 공법의 경우 시간 적, 경제적 부담이 크기 때문에 내진보강이 잘 이루어지지 않는다. 따라서 모서리앵글과 CN복합섬유패널을 활용하여 DIY 시공 이 가능한 전단보강공법을 제안하고자 하며 본 실험에서 CN복합섬유패널의 전단성능을 평가하고자 한다. 볼트 연단거리 및 앵 글의 재질을 변수로 설정하여 실험한 결과, 볼트 연단거리가 가까울수록 각형띠판 래티스기둥의 전단내력이 증진되는 것을 확 인하였으며 슬리브 볼트는 고장력 볼트에 비하여 현저히 내력이 저하되어 CN복합섬유패널을 평가하기가 어려웠다. 또한, 알루 미늄앵글은 강재앵글에 비하여 내력은 낮지만 연성능력이 좋은 것으로 평가되었고, 강재앵글은 상대적으로 강성이 크기 때문에 CN복합섬유패널에 주는 영향이 미미한 것을 확인하였다. 이를 실용화하기 위해서 구체적으로 앵글의 크기와 볼트 연단거리를 변수로 설정하여 실험을 수행해야 할 것으로 판단된다.

Microbiologically Influenced Corrosion (MIC) occurring in underground buried pipes of API 5L X65 steel was investigated. MIC is a corrosion phenomenon caused by microorganisms in soil; it affects steel materials in wet atmosphere. The microstructure and mechanical properties resulting from MIC were analyzed by OM, SEM/EDS, and mapping. Corrosion of pipe cross section was composed of ① surface film, ② iron oxide, and ③ surface/internal microbial corrosive by-product similar to surface corrosion pattern. The surface film is an area where concentrations of C/O components are on average 65 %/ 16 %; the main components of Fe Oxide were measured and found to be 48Fe-42O. The MIC area is divided into surface and inner areas, where high concentrations of N of 6 %/5 % are detected, respectively, in addition to the C/O component. The high concentration of C/O components observed on pipe surfaces and cross sections is considered to be MIC due to the various bacteria present. It is assumed that this is related to the heat-shrinkable sheet, which is a corrosion-resistant coating layer that becomes the MIC by-product component. The MIC generated on the pipe surface and cross section is inferred to have a high concentration of N components. High concentrations of N components occur frequently on surface and inner regions; these regions were investigated and Na/Mg/Ca basic substances were found to have accumulated as well. Therefore, it is presumed that the corrosion of buried pipes is due to the MIC of the NRB (nitrate reducing bacteria) reaction in the soil.