The purpose of this study is to develop a pH measurement system capable of measuring the acidity of saliva to check the change in pH level in saliva during driving and to detect whether fatigue is affected. When the pH level is checked at rest and operation, and oxygen concentration is supplied additionally, it will be verified whether the fatigue is reduced. It is reported that the pH level in saliva is divided into stages from 0 to 14, and the lower the value based on step 7, the higher the fatigue, and the lower the fatigue. In particular, in enclosed vehicles, drowsiness and fatigue due to increased carbon dioxide have increased, leading to a major cause of traffic accidents. Therefore, fatigue may be detected in advance by analyzing fatigue through a change in pH level by supplying oxygen during operation. The electromotive force generated by the existing itself is a level of several mV to develop a pH measurement system, so it is developed by expanding it to a range that can be measured using a readout circuit. In the experiment, 13 male experimenters in their 20s measured pH levels in resting and driving conditions. After 20 minutes of rest, the process of inhaling oxygen for 20 minutes was repeated three times. The oxygen concentration used in the experiment was 21% oxygen and 30% oxygen concentration in the atmospheric state, and in the oxygen supply method, a triangular flask was directly connected to the subject’s nose and then oxygen was supplied. As a result of collecting and analyzing saliva after rest and operation, it was confirmed that the pH level tended to decrease in the operating state. In addition, as a result of increasing the pH level when the oxygen concentration is 30% more than 21%, it is confirmed that fatigue tends to decrease as the oxygen concentration increases. Therefore, it was possible to confirm a significant change in fatigue by analyzing the pH level of saliva through this pH measurement system. This study can be used as a fatigue test in various environments through simple pH measurement.

The The purpose of this study is to establish evaluation criteria for the purchase of electric vehicles and to present an evaluation model using quantitative scales for evaluation factors. This study was limited to the study of purchasing factors related to electric vehicles, and the spatial scope was limited to potential buyers in their 20s to 50s living in the Daejeon area. Based on the survey, the factors affecting the purchase factors (energy economics, image, performance, maintenance, price) were examined using the AHP method, and the priorities were analyzed to determine how much influence these factors have on the purchase of electric vehicles. In addition, in order to verify the logical consistency of the survey items, a consistency ratio test (c) was conducted. Through this study, priority considerations for the purchase of electric vehicles were presented, and information on future consumer interest in electric vehicles was conducted. It is judged to be able to provide an opportunity to provide various services for each layer.

This study was performed to develop a Kdiet-index based on the definitions and characteristics of traditional Korean food. The Korean Food Pattern Index (Kdiet-index) for diseases was applied using dietary data from the 2017 National Health and Nutrition Examination Survey (KNHANES) and the association between Kdiet-index and metabolic disease was confirmed. The study subjects were 1,971 Korean adults aged >40, and the components were classified according to 14 criteria used to establish the Kdiet-index. Main ingredients up to the top 3 were designated using dish names, ingredients, and contents using KNHANES dietary data. Kdiet-index was classified using scores of ≤3 points, 4-7 points, and ≥8 points and total Kdietindex were calculated by summing dietary scores. Correlations between Kdiet-index and obesity, hypertension, hyperlipidemia, and diabetes were analyzed. The odds ratio (OR) and 95% confidence interval (CI) for obesity were 0.531, 0.385~0.732 and for elevated cholesterol (≥240 mg/dL) indices were 0.471, 0.282~0.788, respectively, which showed a significant decreased in the risk for each disease for Kdiet-index of ≥8 points. This study confirms that metabolically related clinical results improved significantly as Kdiet-index increased and that higher Korean food pattern indices are associated with lower risks of metabolic disease

인천광역시에서 유통 중인 농산물을 대상으로 2019년부 터 2021년까지 최근 3년간 잔류농약 모니터링을 실시한 결과 총 7,069건 중 83건(1.2%)이 잔류허용기준을 초과하 였다. 농약 잔류허용기준을 초과한 부적합 농산물의 비율 은 1.0%, 1.4%, 1.1%으로 매년 유사한 수준으로 나타났으 며 잔류농약 검출율은 8.2%, 8.4%, 7.4%를 보였다. 최근 3 년간 diazinon, flubendiamide, procymidone, fluxametamide, fluquinconazole, hexaconazole 등의 순서로 부적합 검출빈 도가 높았으며 농산물 분류별로는 전체 농산물 중 엽채류 와 허브류에서 매년 83% 이상 발생하였다. 부적합 발생 빈도가 높았던 농산물은 고수(잎), 참나물, 취나물, 파 등 이었으며 고수(잎)은 3년 연속으로 부적합 건수가 가장 많 았다. 농산물 생산지역별로는 경기, 인천, 충남, 전남 순으 로 부적합 건수가 많았으나 지역별 출하 농산물의 검사건 수 대비 부적합율은 1.5% 내외로 큰 차이는 없었다. 일부 농산물에서 농약 잔류허용기준의 최대 250배까지 잔류농 약이 검출되는 사례도 발생하므로 부적합이 자주 발생하 는 농산물, 부적합 검출빈도가 높은 농약 성분들의 철저 한 관리가 요구된다. 특히, 농약 사용량 및 사용법 준수, 출하시기 조절 등 농민들의 교육 및 인식 개선이 필요할 것으로 보인다. 안전이 확보된 농산물의 생산과 유통, 소 비자의 안전한 식생활을 보장하기 위해서는 농산물에 대 한 잔류농약 모니터링을 지속적으로 실시하여 부적합 발 생 농산물의 유통을 사전에 차단하는 것이 무엇보다 중요 할 것으로 판단된다.

This study demonstrates the effect of the compaction pressure on the microstructure and properties of pressureless-sintered W bodies. W powders are synthesized by ultrasonic spray pyrolysis and hydrogen reduction using ammonium metatungstate hydrate as a precursor. Microstructural investigation reveals that a spherical powder in the form of agglomerated nanosized W particles is successfully synthesized. The W powder synthesized by ultrasonic spray pyrolysis exhibits a relative density of approximately 94% regardless of the compaction pressure, whereas the commercial powder exhibits a relative density of 64% under the same sintering conditions. This change in the relative density of the sintered compact can be explained by the difference in the sizes of the raw powder and the densities of the compacted green body. The grain size increases as the compaction pressure increases, and the sintered compact uniaxially pressed to 50 MPa and then isostatically pressed to 300 MPa exhibits a size of 0.71 m. The Vickers hardness of the sintered W exhibits a high value of 4.7 GPa, mainly due to grain refinement.

We investigated the standard cultivation substrate for Sparassis latifolia “Neowul” bred in Jeollabuk-do Agricultural Research and Extension Services. Cultivation characteristics and yield were assessed by varying the kind of sawdust and additives, and the mixing ratio. The cultivation period in larch sawdust was the shortest at 97 days. The yield was excellent (143.6 g). The findings indicated that larch is a tree species appropriate for the cultivation of S. latifolia. When the additives were varied, the yield and productivity (53.1%) were highest (116.6 g) for the wheat bran treatment. Thus, wheat bran would be an additive appropriate for culturing S. latifolia. Concerning the use of different mixing ratios, larch sawdust:beet-pulp:wheat bran ratios of 80:15:5 and 85:10:5 resulted in yields of 114.4 g and 111.4 g, and productivity of 52.5% and 51.8%, respectively. These yield and productivity values were not statistically different. Thus, the standard cultivation substrate for S. latifolia can comprise larch sawdust, beet pulp, and wheat bran at a ratio of 80:15:5 or 85:10:5. The carbon/nitrogen (C/N) ratio assumed to be appropriate for the cultivation of S. latifolia was 184 –223. Pinheading would be difficult below a C/N substrate ratio of 105. Thus, the C/N ratio of the media, as well as the pH, would be vital factors affecting pinheading during S. latifolia cultivation.

광전기화학 성능을 향상시키기 위해 각 ZnO, ZnSe과 g-C3N4 소재의 장점을 살리도록 3성분계 적층 구조를 디자 인했다. 용액공정으로 FTO 기판위에서 ZnO 나노로드 어레이가 성장하도록 한 후 ZnO표면에 Se을 부착시켜 ZnO표면에 서 ZnSe층이 형성 되도록 이온 치환법을 도입하였다. ZnO/ZnSe 나노로드 위에 g-C3N4 층을 스핀코팅 한 후 각 층이 화 학적 접합이 되도록 질소 분위기 하에서 열처리를 하였다. AM 1.5G, 0.5 V 외부전압하에서 각 적층구조별로 광전기화학 적 전류밀도를 측정하였고 비교 결과 ZnO/ZnSe/g-C3N4 나노로드가 ZnO 및 ZnO/ZnSe 나노로드에 비하여 보다 높은 광 전류 밀도가 측정되었다. 수직 정렬된 ZnO 육각 프리즘형태는 큰 비표면적과 축 방향을 따라 전자 흐름을 원활히 하고, ZnSe 층은 비표면적과 광흡수 범위를 더욱 넗히는 효과를 가져왔다. 이로 인하여 ZnO/ZnSe/g-C3N4 삼원 접합 전극의 향상된 성능은 가시광선 흡수범위 확장, 전하 분리 강화 및 전자 전도도 향상으로 인한 시너지 효과에 기인되는 것으로 판단된다.

Purpose: The purpose of this study was to explore the nurses’ experience of the side effects of COVID-19 vaccination and understand its meaning. Methods: This study was a qualitative study using the content analysis method. The data collection period using a focus group was from October 26, 2021 to January 23, 2022. Results: The themes included: “Pressure from mandatory COVID-19 vaccination”, “Feeling relieved because the side effects are mild”, “Severe vaccine side effects cause negative emotions”, “Tolerating side effects and coping personally”, “Confusion and alienation about insufficient coping of side effects”, “Feeling skeptical about the COVID-19 vaccination policy”, “Thinking about how to build trust in the COVID-19 vaccine”. Conclusion: In the future, it is considered important to establish scientific evidence through continuous monitoring and data collection of the side effects of COVID-19 vaccination and to build trust in vaccines through transparent information disclosure.

As a method to understand the ecological habits around the artificial reef, various reports such as fishing gear survey, diving, sound survey, underwater CCTV and camera, etc. are reported. Among them, the sound survey method is carried out by installing an acoustic system on the ship and can be investigated regardless of the marine environment such as time constraints and turbidity. Such method, however, takes a lot of manpower and time as the ship travels at a constant speed. Investigations around artificial reefs are being conducted in an artificial way, and a lot of time and labor are consumed as such. Maritime buoys have been operated for various purposes such as route signs, weather observation, marine environment monitoring and defense monitoring for navigation safety in the past, but studies on monitoring systems for ecological habits and distribution of fish using marine buoys are remarkably insufficient. Therefore, this study aims to develop a system that allows users to directly monitor fish group detector data by estimating the distribution of fish groups around artificial reefs and using wireless communication at sea. In order to confirm the suitability of the maritime buoy used in this study, it was operated to compare data using LTE-equipped buoys capable of wireless communication and a data logger-type system buoy. Data transmission of buoys capable of LTE communication was carried out in a 10-minute ON, 10-minute OFF method due to the limitation of the power supply capacity, and data of the data logger-type buoy received full data. We compared and analyzed the data received from the two fish detectors. It is expected that real-time monitoring of the wireless buoy detection device using LTE will be possible through future research.