The dyeing process is a very important unit operation in the leather and textile industries; it produces significant amounts of waste effluent containing dyes and poses a substantial threat to the environment. Therefore, degradation of the industrial dye-waste liquid is necessary before its release into the environment. The current is focusing on the reduction of pollutant loads in industrial wastewater through remediating azo and thiazine dyes (synthetic solutions of textile dye consortium). The current research work is focused on the degradation of dye consortium through photo-electro-Fenton (PEF) processes via using dimensionally stable anode (Ti) and graphite cathode. The ideal conditions, which included a pH of 3, 0.1 (g/L) of textile dye consortium, 0.03 (g/L) of iron, 0.2 (g/L) of H2O2, and a 0.3 mAcm-2 of current density, were achieved to the removal of dye consortium over 40 min. The highest dye removal rate was discovered to be 96%. The transition of azo linkages into N2 or NH3 was confirmed by Fourier transforms infra-red spectroscopic analysis. PEF process reduced the 92% of chemical oxygen demand (COD) of textile dye consortium solution, and it meets the kinetics study of the pseudo-first-order. The degradation of dye through the PEF process was evaluated by using the cyclic voltammetric method. The toxicity tests showed that with the treated dye solution, seedlings grew well.

Abstract Activated carbon from the shell of the cashew of Para (SCP) was produced by chemical activation with ZnCl using the ratio of SCP: ZnCl2 1.0:1.5 at 700 °C. The prepared activated carbon (SCP700) was used for the removal of two emerging contaminants, 4-bromophenol (4-BrPhOH) and 4-chloroaniline (4-ClPhNH2) that are primarily employed in the industry. Different analytical techniques were used to characterize the activated carbon. From the N2 adsorption–desorption isotherms were obtained the specific surface area of 1520 m2 g− 1 and total pore volume of 0.492 cm3 g−1. The functional groups were identified by the FTIR technique and quantified by modified Boehm titration. The results revealed the bearing of several functional groups on the SCP700 surface, which may utterly influence the removal of the emerging contaminants. The equilibrium experiments showed that the maximum uptaken capacities (Qmax) achieved at 45 °C were 488.2 (4-BrPhOH) and 552.5 mg g−1 (4-ClPhNH2). The thermodynamic parameters demonstrated that the processes of 4-BrPhOH and 4-ClPhNH2 adsorption are exothermic, spontaneous, energetically suitable, and the magnitude of ΔH° is compatible with physisorption. The mechanism of the adsorption of the emerging contaminants onto the carbon surface is dominated by microporous filling, hydrogen bonds, π-stacking interactions, and other Van der Waals interactions. The use of activated carbon for the treatment of industrial synthetic wastewater with several inorganic and organic molecules commonly found in industrial effluents showed a very high percentage of uptaking (up to 98.64%).

본 리뷰 논문은 식품 산업에서 나노 기술의 활용에 관한 보고이다. 식품 병원균에 대한 항균 활성을 갖는 생리 활성 성분은 식품 보존시 효율성을 향상시키고 보존성을 증진시키기 위해 나노입자(NPs)로 캡슐화된다. 그러나, 이러한 NPs는 인간에게 생체 적합성과 무독성을 지녀야 된다. 식품 보존분야의 발전은 일부 산업 분야에서 식품 포장용 NPs의 개발을 가져왔다. 식품 산업 분야에서 가장 일반적으로 사용되는 NPs 그룹은 금속 산화물이다. 산화 아연과 이산화 티타늄 같은 금속 산화물 NPs는 식품 재료에 서 항균 활성을 나타내기 때문에, NPs는 강화된 기능적 특성으로 식품 보존에 사용될 수 있다. 식품 영양과 관능적 특성과 관련된 나노 기술의 적용은 나노 기반 식품 제조 및 보존에 관한 안전규제를 중심으로 간략하게 정리하였다.

Research on the useful mushroom was done at Aurora Memorial National Park (AMNP). The Park is situated in Central Luzon Region with a total land area of 5,676 hectares. AMNP has no distinct wet and dry season thus provides a favorable climate, which promotes the growth of useful mushrooms. The photo-documentation and collections were performed to assess diversity. Five Transect Lines (TL) were laid out in five areas, with 20m x 30m quadrat and interval of 100 meters between quadrats. The study resulted in the identification of 36 families, 53 genera, and 104 species of which 97 are basidiomycetes and 6 are ascomycetes. Simpson’s and Shannon diversity indexes resulted in 0.7254 and 1.4295, respectively. In both indexes, useful mushrooms at AMNP showed moderately diverse. While the evenness revealed 0.1565 indicating low species evenness in each TL. Among the significant findings revealed two new possible new species of Microporus and Cymatoderma.

We report the characterization of a massive (mp = 3:91:4Mjup) microlensing planet (OGLE- 2015-BLG-0954Lb) orbiting an M dwarf host (M = 0:33  0:12M) at a distance toward the Galactic bulge of 0:6+0:4 􀀀0:2 kpc, which is extremely nearby by microlensing standards. The planet-host projected separation is a?  1:2AU. The characterization was made possible by the wide-eld (4 deg2) high cadence (􀀀 = 6 hr􀀀1) monitoring of the Korea Microlensing Telescope Network (KMTNet), which had two of its three telescopes in commissioning operations at the time of the planetary anomaly. The source crossing time t = 16 min is among the shortest ever published. The high-cadence, wide-eld observations that are the hallmark of KMTNet are the only way to routinely capture such short crossings. High-cadence resolution of short caustic crossings will preferentially lead to mass and distance measurements for the lens. This is because the short crossing time typically implies a nearby lens, which enables the measurement of additional eects (bright lens and/or microlens parallax). When combined with the measured crossing time, these eects can yield planet/host masses and distance.

Polarbear is a ground-based experiment located in the Atacama desert of northern Chile. The experiment is designed to measure the Cosmic Microwave Background B-mode polarization at several arcminute resolution. The CMB B-mode polarization on degree angular scales is a unique signature of primordial gravitational waves from cosmic in ation and B-mode signal on sub-degree scales is induced by the gravitational lensing from large-scale structure. Science observations began in early 2012 with an array of 1,274 polarization sensitive antenna-couple Transition Edge Sensor (TES) bolometers at 150 GHz. We published the first CMB-only measurement of the B-mode polarization on sub-degree scales induced by gravitational lensing in December 2013 followed by the first measurement of the B-mode power spectrum on those scales in March 2014. In this proceedings, we review the physics of CMB B-modes and then describe the Polarbear experiment, observations, and recent results.

Polycyclic aromatic hydrocarbons (PAHs) in Galactic planetary nebulae (PNe) are investigated by means of the unidentified infrared (UIR) bands. Continuous near- to mid-infrared spectra of PNe are obtained with the AKARI/IRC and the Spitzer/IRS. All 19 PNe in the present study show prominent dust emissions and we investigate the variation in the intensity ratios among the UIR bands. The ionization fraction and the size distribution of PAHs in PNe are derived using the UIR band ratios. We find that the ionization fraction of PAHs in PNe is around 0.0-0.6 and that small PAHs are scarce. The present result indicates a systematic trend of the 3.4 μm aliphatic feature to become weak as the PAH ionization fraction increases.

This paper compares the effect of using different types of iron powders for the preparation of by calciothermic reduction-diffusion (CRD). Three types of iron powder were used: carbonyl, sponge and water atomized. The results show that, when immediately nitrogenated after the CRD process, prepared from sponge and water atomized iron powders yield -magnets with a high degree of texture. However, after a suitable treatment with hydrogen followed by nitrogenation, -powders made from Carbonyl iron produce magnets with the best quality regarding coercivity, remanence and degree of texture.

Solid Oxide Fuel Cell technology uses powder processes to produce electrodes with residual porosity by partially sintering a mixture of electronically and ionically conducting particles. We model porous fuel cell electrodes with 3D packings of monosized spherical particles. These packings are created by numerical sintering. Each particle-particle contact is characteristic for an ionic, electronic or electrochemical resistance. The numerical packing is then discretized into a resistor network which is solved by using Kirchhoff's current law to evaluate the electrode's electrochemical performance. We investigate in particular percolation effects in functionally graded electrodes as compared to other types of electrodes.

The free sintering of metallic powders blended with non sintering inclusions is investigated by the Discrete Element Method (DEM). Each particle, whatever its nature (metallic or inclusion) is modeled as a sphere that interacts with its neighbors. We investigate the retarding effect of the inclusions on the sintering kinetics. Also, we present a simple coarsening model for the metallic particles, which allows large particles to grow at the expense of the smallest.

The objective of this study was to examine the effect of EGF on meiotic maturation and pronuclear (PN) formation of porcine oocytes. Prepubertal gilt cumulus-oocyte-complexes (COCs) aspirated from 2~6mm follicles of abbatoir ovaries were matured in TCM199 containing 0.1mg/ml cysteine, 0.5㎍/ml FSH and LH, and EGF (0, 5, 10, 20, 40 ng/ml) for 22 hr at 39℃ in a humidified atmosphere of 5% CO2 in air. They were then cultured for an additional 22hr without hormones. In Experiment 1, to examine the nuclear maturation at 44hr of culture, the expanded cumulus cells were removed by vortexing for 1 min in 3 mg/ml hyaluronidase. The oocytes were fixed in acetic acid: methanol (1:3, v/v) at least for 48 hr and stained with 1% orcein solution for 5 min. Nuclear status was classified as germinal vesicle (GV), germinal vesicle breakdown (GVBD), prophase-metaphase I (PI-MI), and PII-MII under microscope. In Experiment 2, to investigate PN formation, oocytes were fertilized with Percoll-treated freshly ejaculated sperm (1 x10 5 cells/ml) in mTBM with 0.3% BSA and 2mM caffeine for 5hr, and cultured in NCSU-23 medium with 0.4% BSA. At 6hr of culture, the embryos were fixed in 3.7% formaldehyde for 48hr and stained with 10ug/ml propidium iodide for 30 min. PN status was classified as no or one PN (unfertilized), 2 PN (normal fertilized) and ≥3 PN (polyspermy). Differences between groups were analyzed using one-way ANOVA after arc-sine transformation of the proportional data. The rate of oocytes that had reached to PII-MII were significantly (P<0.05) higher in all groups added EGF than that of non-treated group (67%), but it did not differ among the all added groups (86%, 85%, 79% and 81%, in 5, 10, 20 and 40 ng/ml EGF, respectively). No differences on the incidence of 2PN were observed in all treated groups (25%, 30%, 33%, 29% and 29%, in 0, 5, 10, 20 and 40 ng/ml EGF, respectively), however, in non-treated group, polyspermy tended to be increased (66% vs 58%, 54%, 52% and 55%, 0 vs. 5, 10, 20, 40 ng/ml EGF, respectively). These results suggest that EGF can be effectively used as an additive for enhancing oocyte maturation and reducing the incidence of polyspermy in pig.