최근 전기차 시장의 확장으로 배터리 산업이 급격히 성장함에 따라 폐배터리 리사이클링 기술 개발의 필요성이 증가하고 있다. 폐배터리 리사이클링 기술은 배터리 산업에 핵심적인 리튬, 코발트, 니켈 등 희소금속의 공급을 안정화하고 환경 및 인간의 건강에 미치는 영향을 경감할 수 있다. 본 총설에서는 금속 회수 기술의 배경이 되는 이론적 원리와 현재 상 용되고 있는 금속 회수 공정을 소개하고자 한다. 또한, 기존 공정의 문제점을 개선하려는 연구 및 기술 개발 동향을 서술하여 리사이클링 기술이 나아가야 할 방향을 소개하고자 한다.

This study was conducted to develop a seed propagation protocol of Hemerocallis taxa native to the Korean Peninsula. In this study, the seed dormancy types were classified. The germination traits of H. thunbergii, H. dumortieri, H. hakuunensis, and H. hongdoensis were also characterized. The initial embryo to seed length ratio (E:S ratio) in seeds of the four Hemerocallis species was between 0.80 and 0.90 at harvest, however, the E:S ratio did not increase until just before germination. Thus, seeds of the four Hemerocallis species had no morphological dormancy (MD), and at least 84% of seeds of all tested species germinated at 25/15℃ under light within 30 days. The lower the incubation temperature, the lower the germination rate of seeds of the four Hemerocallis species. However, the temperature range for germination was expanded due to old stratification. Gibberellin treatment increased the germination rate or germination speed at a relatively low temperature of 15/6℃. However, this treatment did not improve the germination rate as much as the temperature at 25/15℃. Under 15/5℃ of incubation, cold stratification increased the final germination percentage and rate/speed and expanded the temperature range for germination from high to low (25/15℃ → 15/6℃). This indicates that the seeds have a conditional dormancy (CD) that germinates in a narrow temperature range. In conclusions, the four Hemerocallis seeds exhibited nondeep physiological dormancy.

The Republic of Korea (ROK), as a member state of the IAEA, is operating the State’s System of Accounting for and Control (SSAC) and conducting independent national inspections. Furthermore, an evaluation methodology for the material unaccounted for (MUF) is being developed in ROK to enhance capabilities of national inspection. Generally, physical and chemical changes of nuclear material are unavoidable due to the operating system and structure of facilities, an accumulation of material unaccounted for (MUF) has been issued. IAEA developed statistical MUF evaluation method that can be applied to all facilities around the world and it mainly focuses on the diversion detection of nuclear materials in facilities. However, in terms of the national safeguard inspection, an evaluation of accountancy in facilities is additionally needed. Therefore, in this research, a new approach to MUF evaluation is suggested, based on the Guide to the Expression of Uncertainty in Measurement (GUM) that an evaluation of measurement uncertainty factors is straightforward. A hypothetical list of inventory items (LII) which has 6,118 items at the beginning and end of the material balance period, along with 360 inflow and outflow nuclear material items at a virtual fuel fabrication plant was employed for both the conventional IAEA MUF evaluation method and the proposed GUM-based method. To calculate the measurement uncertainty, it was assumed that an electronic balance, gravimetry, and a thermal ionization mass spectrometer were used for a measurement of the mass, concentration, and enrichment of 235U, respectively. Additionally, it was considered that independent and correlated uncertainty factors were defined as random factors and systematic factors for the ease of uncertainty propagation by the GUM. The total MUF uncertainties of IAEA (σMUF) and GUM (uMUF) method were 37.951 and 36.692 kg, respectively, under the aforementioned assumptions. The difference is low, it was demonstrated that the GUM method is applicable to the MUF evaluation. The IAEA method demonstrated its applicability to all nuclear facilities, but its calculated errors exhibited low traceability due to its simplification. In contrast, the calculated uncertainty based on the GUM method exhibited high reliability and traceability, as it allows for individual management of measurement uncertainty based on the facility’s accounting information. Consequently, the application of the GUM approach could offer more benefits than the conventional IAEA method in cases of national safeguard inspections where factor analysis is required for MUF assessment.

The air transport industry is experiencing unprecedented fluctuations in aviation demand through the Covid-19 pandemic, and is more focused than ever on maintaining and generating business profitability. During the pandemic, demand for air cargo has soared, and the conversion business from passenger aircrafts to freighters(P2F) is drawing attention as a new business in the aviation maintenance industry. This study derives important factors to be considered in order to successfully carry out the P2F project through a wide range of cases and related literature, and analyzes the relative importance of each factor using the analytic hierarchy process. Through a survey of 33 aviation maintenance experts with more than 20 years of field experience, the importance of main factors and their sub factors was determined and implications were drawn. As a primary result, in order to succeed in the P2F project, the main factors were identified in the order of skill, finance, and location. The most important sub factors for each main factors were identified in order of securing airframe modification skill, securing infrastructure construction cost, and creating P2F business complex and district. The quantified success factors suggested the critical direction for the successful development of Korea's P2F business, and presented viable and specific business strategies and implementation plans for each factors.

Aster 속에 속하는 자생식물로는 눈갯쑥부쟁이, 개쑥부쟁이, 쑥부쟁이, 벌개미취, 참취 등이 있는데, 대부분 식용 또는 관상용 으로 많이 활용되고 있다. 특히 눈갯쑥부쟁이는 제주 한라산(표 고 1,200~1500m근처)에서 자생하는 한반도 특산식물로써, 다른 Aster 속과 다르게 포복성을 가지고 있고 개체당 소화의 수가 많아 관상가치가 매우 뛰어나다. 또한 파종 당해년에도 개화가 가능하기 때문에 유망한 관상식물 자원이라 할 수 있다. 본 연구 에서는, 한반도 특산 눈갯쑥부쟁이의 유전자원 보존 및 대량번 식을 위한 기초자료를 확보하고자 종자의 발아특성 및 휴면유형 을 분류하였다. 눈갯쑥부쟁이 종자는 형태적으로 완전하게 발달 된 배를 가지고 있고, 배양 72시간 내에 145%의 수분을 흡수하 였다. 4가지 온도조건(4°C, 15/6°C, 20/10°C, 25/15°C)에 배양한 결과, 광조건에서는 각각 67.0%, 58.9%, 62.2%, 71.6% 발아하였 고, 암조건에서는 각각 79.4%, 65.9%, 65.9%, 49.1% 발아하였 다. 저온층적처리(4°C) 실험 결과, 최종 발아율에는 큰 차이가 없었으나, 층적처리 기간 동안에도 발아하는 특성을 관찰하였 다. GA3처리 후 25/15°C에 배양한 결과, 0, 10, 100, 1000mg·L-1 처리에서 각각 57.9%, 68.3%, 74.9%, 63.9%의 발아율을 보였 다. 15/6°C에 배양한 경우에는 각각 78.3%, 62.8%, 72.2%, 55.9% 발아하였다. 본 연구에서는 위 실험들을 통하여, 약 80% 정도는 non-dormant 종자로, 나머지 약 20%는 생리적 휴면 (physiological dormancy)을 가지고 있는 것으로 판단되었다.

한라개승마(Aruncus aethusifolius (H.Lév.) Nakai)는 관상 용 및 약용 식물로 이용이 될 가능성이 있는 한국 고유종이 다. 그러나 종자에 의한 번식에 대해서는 알려진 바가 거의 없다. 이 연구는 한라개승마의 종자번식 프로토콜을 개발하기 위해 수행되었다. 실험에 사용된 종자는 2019년 11월 3일 한 택식물원에서 채종하였으며, 안동대학교 유전자원포지에서 관 리하던 식물체에서 2020년 11월 10일에 채종하였다. 한라개 승마 종자는 완전히 성숙한 배를 가지고 있었다. 종자는 모식 물체에서 탈리되고 이듬해 3월부터 발아하기 시작하였다. 수 분흡수실험 3시간 이내에 초기 건조상태의 무게 대비 25% 이 상 무게가 증가하여 물리적휴면이 없는 것을 확인하였다. 명 암 조건에서의 온도별 발아시험 결과, 한라개승마 종자의 발 아율은 암조건보다 명조건에서 높았고, 명암 조건 모두 4°C에 서 발아하지 않았다. 따라서 종자는 광발아종자이므로 soil seed bank를 형성할 가능성이 있다. GA 실험의 경우 2019년 수확한 종자와 2020년 수확한 종자의 효과가 다르게 나타났 다. 저온습윤처리 기간이 길어질수록 발아소요일이 앞당겨지 는 것으로 나타났다. 그러나 2020년도 종자는 발아율이 낮아 서 12주간의 저온습윤처리 이후에도 발아율이 40%를 넘지 못 했다. 그리고 후숙처리 기간은 한라개승마 종자의 발아에 영 향을 미쳤다. 실험결과 2019년 수확한 종자와 2020년 수확한 종자의 발아율 차이가 확인되었다. 이는 모식물체의 생육 환 경에 따른 영향으로 판단된다.

In this paper, we investigate the requirements of QPA(Quality Process Audit), which is a process quality audit system for secondary defense contractors, compared with those of DQMS(Defense Quality Management System). And evaluate whether the deployment of QPA meets the DQMS certification requirements through the case example of Company H. The evaluation items of QPA are composed of five categories such as Material Management, Incoming Inspection, Manufacturing Process, Product Evaluation, and Packaging Management. The QPA requirements are mainly related to the chapter 7(support) and chapter 8(operation) of DQMS standards. In this view point, QPA can be expected as an effective audit for suppliers preparing for DQMS certification. In the case example, we evaluate the results and effects of improvement due to QPA and compare it with the case of DQMS. QPA can be used as appropriate quality management standards of secondary and tertiary defense contractors and can provide the basis guidelines for the preparation of implementation steps in DQMS certification.

Since nuclear power plant (NPP) dismantling carries the possibility of radiation exposure from a hazardous environment, it’s important to minimize that by using a remote manipulator et al. However, due to complexity of nuclear facilities, it’s necessary for operators to increase their proficiency by operating in advance in a virtual environment. In this research, we propose a virtual manipulator system using a haptic device for NPP’s reactor vessel internals (RVI) dismantling which can realistically manipulate.

연구는 참외 재배 지에서 흰가루병, 담배가루이 및 두점박이응애가 동시에 발생하였을 때 45, 40, 35°C (대조구)의 온도에서 측창으로 환기 처리 시, 온실 내 온 ․ 습도의 변화, 병충해 발생과 잎말림, 그리고 개화조절에 미 치는 효과를 검토하였다. 3월 3일 ‘히든파워’ 대목에 접붙여진 ‘알찬꿀’ 참외를 40cm 간격으로 격리상에 심었고, 위 에 언급한 병해충이 모든 처리구에서 발생한 6월 18일부터 7월 13일까지 처리하였다. 온실의 온도는 맑은 날에는 설정 온도 지점까지 증가되었고, 45°C 환기 처리에서 고온 고습이 약 9시간 동안 유지되었다. 주간 최고 기온과 최 저 상대습도 차이는 45°C 환기 처리에서 가장 높았다. 환기 처리 11일 후에는 흰가루병과 두점박이응애 피해가 45°C 환기 처리에서 거의 회복되었지만 40°C와 35°C에서는 그렇지 않았다. 처리 14일 후, 담배가루이와 두점박이 응애 밀도는 45°C에서 유의하게 감소하였으나 흰가루병 증상은 유의하게 감소하지는 않았다. 잎말림은 고온에서 유발되었으나 45°C에서도 심하지 않았다. 처리 26일 후, 새로 나온 줄기의 15 마디의 개화수를 조사한 결과, 45°C에 서 암꽃이 전혀 나오지 않았고 수꽃은 1.2개로 나타났다. 이상의 결과는, 고온기에 45°C의 고온에서 2－3주간 환기 처리는 온실 내부의 고온 고습을 유도하여 흰가루병, 담배가루이, 두점박이응애를 통제하고, 개화를 억제하여 참외 의 영양 생장을 회복할 수 있는 방법으로 사료되었다.

Military aircraft R&D projects require large-scale investment in cost and time, and involve a complex coordination process in decision-making. The R&D project manager should determine the development management priorities as accurately as possible and focus on R&D capabilities, thereby reducing the risks of the aircraft R&D project. To this end, this study aims to reduce R&D risk by prioritizing cost, schedule, and performance, which are basic management factors used in R&D project management in defense project management regulations. Analytic Hierarchy Process (AHP) is applied using a questionnaire for managers in charge of aviation R&D under the Defense Acquisition Program Administration. As a primary result, the importance of the factors that the aircraft R&D project manager should consider was derived in the order of performance, cost, and schedule, and the priorities of performance and cost in the lower layer were also identified. In addition, in order to provide practical risk management measures to aircraft R&D project managers, the results of analyzing 28 cases of US National Transportation Safety Board accidents were compared and analyzed with the AHP analysis results, and management measures suitable for the situation were specified.

As a preclinical study, many researchers have been attempted to convert the porcine PSCs into several differentiated cells with transplantation of the differentiated cells into the pigs. Here, we attempted to derive neuronal progenitor cells from pig embryonic germ cells (EGCs). As a result, neuronal progenitor cells could be derived directly from pig embryonic germ cells through the serum-free floating culture of EB-like aggregates (SFEB) method. Treating retinoic acid was more efficient for inducing neuronal lineages from EGCs rather than inhibiting SMAD signaling. The differentiated cells expressed neuronal markers such as PAX6, NESTIN, and SOX1 as determined by qRT-PCR and immunostaining. These data indicated that pig EGCs could provide valid models for human therapy. Finally, it is suggested that developing transgenic pig for disease models as well as differentiation methods will provide basic preclinical data for human regenerative medicine and lead to the success of stem cell therapy.

This study investigates passenger-authored online reviews of airline services using social network analysis to compare the differences in customer perceptions between full service carriers (FSCs) and low cost carriers (LCCs). While deriving words with high frequency and weight matrix based on the text analysis for FSCs and LCCs respectively, we analyze the semantic network (betweenness centrality, eigenvector centrality, degree centrality) to compare the degree of connection between words in online reviews of each airline types using the social network analysis. Then we compare the words with high frequency and the connection degree to gauge their influences in the network. Moreover, we group eight clusters for FSCs and LCCs using the convergence of iterated correlations (CONCOR) analysis. Using the resultant clusters, we match the clusters to dimensions of two types of service quality models (Grönroos, Brady & Cronin (B&C)) to compare the airline service quality and determine which model fits better. From the semantic network analysis, FSCs are mainly related to inflight service words and LCCs are primarily related to the ground service words. The CONCOR analysis reveals that FSCs are mainly related to the dimension of outcome quality in Grönroos model, but evenly distributed to the dimensions in B&C model. On the other hand, LCCs are primarily related to the dimensions of process quality in both Grönroos and B&C models. From the CONCOR analysis, we also observe that B&C model fits better than Grönroos model for the airline service because the former model can capture passenger perceptions more specifically than the latter model can.

Samples were collected from planktonic habitats of the fresh and brackish waters in Korea from August 2016 to May 2018. As a result, three genera and nine species were newly recorded in Korea. The unrecorded indigenous genera were Anathece, Chondrocystis and Geminocystis, and nine species were Anabaenopsis arnoldii, Anathece smithii, Chondrocystis dermochroa, Coelosphaerium aerugineum, Eucapsis microscopica, Geminocystis herdmanii, Microcystis panniformis, Synechococcus nidulans and Woronichinia karelica. Anathece smithii, Coelosphaerium aerugineum, Eucapsis microscopica, Microcystis panniformis and Synechococcus nidulans had been reported to inhabit freshwater, but these were found in brackish water in this study. Microcystis panniformis, which is a potential genus for causing green-tide, is taxonomically valuable in Korea.

Samples were collected from benthic and subaerophytic habitats of fresh and brackish water in Korea from April 2017 to April 2018. Accordingly, three genera and seven species were newly recorded in Korea. Three unrecorded genera were Cephalothrix, Cyanophanon and Toxifilum, and seven species were Anagnostidinema pseudacutissimum, Calothrix elenkinii, Cephalothrix komarekiana, Cyanophanon mirabile, Cyanosarcina chroococcoides, Leptolyngbya ectocarpi and Toxifilum mysidocida. Anagnostidinema pseudacutissimum and Cephalothrix komarekiana had been previously reported to inhabit freshwater, but these were found to be present in brackish water during the period of the present study. Also, Cyanosarcina chroococcoides previously reported to inhabit moorland waters and swamps, were found to be present in subaerophytic habitat.

Phytoplanktons were collected from various environments including small marshes, small ponds, reservoirs and brackish water from March 2017 to November 2017. In this study, five species of family Scenedesmaceae were newly recorded in Korea. The genus Desmodesmus was newly reported in Korea. The newly recorded species are Scenedesmus nanus, S. praetervisus, Desmodesmus costato-granulatus, D. lunatus and D. spinulatus. S. nanus and S. praetervisus are known to occur in freshwater, but they were found in the brackish water in this study.