본 연구는 대한민국 울릉도 특산식물인 추산쑥부쟁이(Aster × chusanensis Y.S.Lim, Hyun, Y.D.Kim & H.C.Shin)의 기내 대량증식체계 확립을 위해 시토키닌 계열 식물생장조절 제를 첨가하여 캘러스 및 신초 형성 조건을 구명하고자 수행 하였다. 실험결과, 추산쑥부쟁이의 줄기 절편체에서 캘러스 와 신초가 형성되었다. 캘러스 형성률은 TDZ 3.0mg·L-1처 리구에서 88.9%로 가장 높았고 BAP 3.0mg·L-1와 Zeatin 3.0mg·L-1 처리구는 66.7%, 2iP 3.0mg·L-1 처리구에서는 11.1%였다. 신초 형성률은 모든 처리구에서 77% 이상이고 특히 TDZ처리구와 Zeatin 처리구에서 100%였다. 그러나 TDZ처리구에서는 형성된 신초가 부풀어 오르거나, 잎에 과수 성이 나타나는 등 형태적 기형이 나타났다. Zeatin처리구에 서 발생한 신초는 정상적인 형태를 나타났다. 잎 절편체에서 는 캘러스, 신초가 발생하지 않았으며 절편체가 탈색하며 고 사하는 것을 확인하였다. 종합적으로 추산쑥부쟁이의 캘러 스 및 신초 형성을 위해서는 줄기 절편체를 배양 재료로 이 용하는 것이 효과적으로 확인되었다. 캘러스 유도에는 TDZ 3.0mg·L-1처리가 가장 효과적이었고, 추후 NAA와 같은 옥신 을 함께 첨가하여 증식 효과를 분석하는 연구가 필요할 것이 다. 또한, 신초 유도에도 TDZ 3.0mg·L-1 처리가 효과적이었 으나 장기간, 고농도로 사용할 경우 형태적인 기형이 발생할 수 있어 정상적인 식물생산에 부적합한 것으로 확인되었다. 따라서 형태적 기형이 발생하지 않은 아데닌 유도체형 시토키 닌인 Zeatin을 활용하는 것을 추천한다. 본 연구는 울릉도 특 산식물인 추산쑥부쟁이의 기내 대량증식과 생태계 유지에 필 요한 종 공급을 위한 대량증식 체계 구축을 위한 자료로 활용 할 수 있을 것이다.

KORAD (Korea Radioactive Waste Agency, http://www.korad.or.kr) has stored slightly contaminated ascon (asphalt coated concrete mixture) that was introduced to Gyeongju repository about a decade ago waiting for a final disposal. It is believed to be mainly contaminated by radioisotope 137Cs due to impurities introduced from the outside during the ascon manufacturing process. We studied characteristics of the radioactive waste to see whether this material would be proper enough to be disposed in Gyeongju LILW repository or be other ways to reduce the disposal volume including self-disposal before its final disposal otherwise. KORAD looked into the properness of characteristics of ascon in terms of WAC (Waste Acceptance Criteria) documented by KORAD that includes general chemical and physical properties of asphalt, density, size of grains, content of organic material and possibility of existence of chelate materials that qualitatively limited to be disposed by the criteria. And other associated characteristics such as gas generation and bio degradation were also investigated. Based on the data obtained from the study, we proposed various plausible solutions in associated with operational and disposal safety and economic view points. This study will be used for KORAD’s decision on how to control and safely dispose the spent ascon within a reasonable time period. And also those experiences may be applied for other LILW issues that require treatment or conditioning of radioactive wastes in the future.

곤충병원성 선충인 Heterorhabditis. megidis(큰형광병원선충)는 참나무 군락지(광주광역시 소재) 사양토에 서 분리 동정되었고, 곤충병원성을 가지는 공생세균은 Photorhabdus temperata로 분리 동정되어 각각 GJ1-2로 명명하였다. H. megidis GJ1-2는 고추(녹광), 애호박(농우), 오이(백다다기), 참외(금싸라기), 토마토(베타티니) 유묘기 경엽처리와 배추(씨알천하일품), 상추(진청맛), 완두(청진주), 수박(삼복꿀), 무(서호) 유묘기 관주처리 에서 21일차까지 기준량과 배량에 대하여 약해(약해 판정기준결과: 0)가 나타나지 않았다, H. megidis GJ1-2는 배추 파밤나방에 대한 방제 효과는 이천시(경기도 소재)와 수원시(경기도 소재)의 시설재배 포장에서 각각 경엽 처리 3일차 71.8%. 73.9%, 7일차 86.2%, 84.6%로 나타났으며, 옥수수 열대거세미나방에 대한 방제 효과는 제주시 (제주특별자치도 소재)의 노지(미사질 양토)에서 경엽처리 7일차 82.6%로 나타났다. 그리고 H. megidis GJ1-2는 랫드를 이용한 급성경구와 급성경피 독성시험 반수치사농도(LD50) 값은 2,000 mg/kg B.W 초과로 IV급(저독성) 으로 구분되었고, 토끼를 이용한 피부와 안점막에 자극성이 없는 것으로 구분되었다. 그리고 담수어류(송사리) 에 대한 급성독성시험 반수치사농도(LD50) 값은 영향을 미치지 않는 기초시험농도 100 mg/L를 초과하였다.

This study aimed to develop a new eco-friendly control method of B. tabaci using a trap plant treated with systemic insecticide. Due to high preference, tobacco plant was selected as a trap plant among solanaceous plants. Out of all 6 systemic insecticides, dinotefuran WG showed the highest mortality (> 97.3 %) against B. tabaci. The concentrations of dinotefuran in tobacco leaves after systemic treatment showed the sharp increase in the pesticide from 2 hrs until 48 hrs (2 d) and steady increase over 35 d. The mortality of B. tabaci in tobacco leaves was about 80% at 9 hrs after treatment and over 90% at 1, 2, 3, 6, 9, and 35 d after treatment. The number of B. tabaci was counted every week after dinotefuran-treated tobacco pots were placed in the tomato greenhouse cultivation. The density of the insects with 3 tobacco plants was app. 75% lower than the control (w/o tobacco plant).

Callipogon relictus, a natural monument, is an insect whose life cycle was assumed to take more than 5 years in nature. Winter is a very harsh season, but it is known to be a crucial condition for many insects’ growth. However, no information is known about the overwintering condition and its effects on C. relictus. To understand the overwintering effects on the growth of C. relictus, we investigated the growth patterns of its larvae in indoor conditions after chilling treatment. The larvae were induced to dormancy at low temperature (4°C) for two months, and put them into 10°C for two weeks to break dormancy. After awakening, the temperature was increased 15°C, 20°C to 25°C at a time, and the larvae were kept for two weeks at each temperature. The larvae were divided into 3 groups (3rd to 5th instar, 6th to 8th instar, 9th to last instar). Lastly, head width and weight of the larvae were measured every 30 days under 25°C condition, and mortality and deformity were counted as well. The mortality and deformity rates were the highest in the first group, and the rates decreased toward the last group. On the other hands, growth rate appeared opposite to mortality and deformity rate of each larval group.

As various accidents have occurred in underground spaces, we aim to improve the quality validation standards and methods as specified in the Regulations on Producing Integrated Map of Underground Spaces devised by the Ministry of Land, Infrastructure and Transport of the Republic of Korea for a high-quality integrated map of underground spaces. Specifically, we propose measures to improve the quality assurance of pipeline-type underground facilities, the so-called life lines given their importance for citizens’ daily activities and their highest risk of accident among the 16 types of underground facilities. After implementing quality validation software based on the developed quality validation standards, the adequacy of the validation standards was demonstrated by testing using data from two-dimensional water supply facilities in some areas of Busan, Korea. This paper has great significance in that it has laid the foundation for reducing the time and manpower required for data quality inspection and improving data quality reliability by improving current quality validation standards and developing technologies that can automatically extract errors through software.

When decommissioning a nuclear power plant, the structure must be made to a disposable size. In general, the cutting process is essential when dismantling a nuclear power plant. Mainly, thermal cutting method is used to cutting metal structures. The aerosols generated during thermal cutting have a size distribution of less than 1 μm. The contaminated structures are able to generate radioactive aerosols in the decommissioning. Radioactive aerosols of 1 μm or less are deposited in the respiratory tract by workers’ breathing, causing the possibility of internal exposure. Therefore, workers must be protected from the risk of exposure to radioactive aerosols. Prior knowledge of aerosols generated during metal cutting is important to ensure worker safety. In this study, the physical and chemical properties of the aerosol were evaluated by measuring the number and mass concentrations of aerosols generated when cutting SUS304 and SA508 using the laser cutting method. High-resolution aerosol measuring equipment (HR-ELPI+, DEKATI) was used to measure the concentration of aerosols. The HR-ELPI+ is an impactor-type aerosol measuring equipment that measures the aerosol number concentration distribution in the aerodynamic diameter range of 6 nm to 10 um in real-time. And analyze the mass concentration of the aerosol according to the diameter range through the impactor. ICP-MS was used for elemental mass concentration analysis in the aerosol. Analytical elements were Fe, Cr, Ni and Mn. For the evaluation of physical and chemical properties, the MMAD of each element and CMAD were calculated in the aerosol distribution. Under the same cutting conditions, it was confirmed that the number concentration of aerosols generated from both materials had a uni-modal distribution with a peak around 0.1 um. CMAD was calculated to be 0.072 um for both SUS304 and SA508. The trend of the CMAD calculation results is the same even when the cutting conditions are changed. In the case of MMAD, it was confirmed that SUS304 had an MMAD of around 0.1 μm in size for only Fe, Cr and Mn. And SA508, Fe, Cr, Ni and Mn were all confirmed to have MMAD around 0.1 μm in size. The results of this study show that a lot of aerosols in the range of less than 1 μm, especially around 0.1 μm in size, are generated when metal is cut using laser cutting. Therefore, in order to protect the internal exposure of workers to laser metal cutting when decommissioning NPPs, it is necessary to protect from nano-sized aerosols beyond micron size.

The effect of Li2O addition on precipitation behavior of uranium in LiCl-KCl-UCl3 has been investigated in this study. 99.99% LiCl-KCl eutectic salt is mixed with 10wt% UCl3 chips at 550°C in the Pyrex tube in argon atmosphere glove box, with 10 ppm O2 and 1 ppm H2O. Then, Li2O chunks are added in mixed LiCl-KCl-UCl3 and the system has been cooled down to room temperature for 10 hours to form enough UO2 particles in the salt. The solid salt has been taken out from the glove box, and cut into three sections (top, middle and bottom) by low-speed saw for further microscopic analysis. Three pieces of solid salt are dissolved in deionized water at room temperature and the solution is filtered by a filter paper to collect non-dissolved particles. The filter paper with particles is baked in vacuum oven at 120°C for 6 hours to evaporate remaining moisture from the filter paper. Further analysis was performed for the powder remaining on the filter paper, and periphery of the powder (cake) on the filter paper. Scanning electron microscopy (SEM), electron diffraction spectroscopy (EDS), and X-ray powder diffraction (XRD) are adopted to analysis the characteristic of the particles. From SEM analysis, the powders are consisted of small particles which have 5 to 10 m diameter, and EDS analysis shows they are likely UO2 with 23 at. % of uranium and 77 at. % oxygen. Cake is also analyzed by SEM and EDS, and needle like structures are widely observed on the particle. The length of needle is distributed from 5 to 20 m, and it has 6 to 10 at. % of chlorine, which are not fully dissolved into deionized water at room temperature. From XRD analysis, the particles show the peak position of UO2, and the result is well matched with the SEM-EDS results. We are planning to add more Li2O in the system for fully reacting uranium in UCl3, and compare the results to find the effect of Li2O concentration on UO2 precipitation.

Solid state grain growth (SSCG) is a method of growing large single crystals from seed single crystals by abnormal grain growth in a small-grained matrix. During grain growth, pores are often trapped in the matrix and remain in single crystals. Aerosol deposition (AD) is a method of manufacturing films with almost full density from nano grains by causing high energy collision between substrates and ceramic powders. AD and SSCG are used to grow single crystals with few pores. BaTiO3 films are coated on (100) SrTiO3 seeds by AD. To generate grain growth, BaTiO3 films are heated to 1,300 oC and held for 10 h, and entire films are grown as single crystals. The condition of grain growth driving force is ΔGmax < ΔGc ≤ ΔGseed. On the other hand, the condition of grain growth driving force in BaTiO3 AD films heat-treated at 1,100 and 1,200 oC is ΔGc < ΔGmax, and single crystals are not grown.

This study aimed to examine the effect of a mild elevation in serum cholesterol level in a porcine coronary overstretch restenosis model using a balloon angioplasty catheter or drug-eluting coronary stent. Pigs were divided into two groups and were fed a commercial normal diet (CND, n = 4) or a high-fat diet (HFD, n = 4) for 5 weeks. Coronary overstretch injury by balloon angioplasty or stent implantation was induced in the left anterior descending and left circumflex artery after 1 week of feeding. Histopathological analysis was performed at 4 weeks after coronary injury. During the experiment, the total cholesterol level in the HFD group increased by approximately 44.9% (from 65.9 ± 3.21 mg/dL at baseline to 95.5 ± 9.94 mg/dL at 5 weeks). The lumen area in the CND group was reduced in comparison with that in the HFD group after balloon angioplasty. After stent implantation, the injury score showed no significant difference. There were significant differences in the neointimal area (2.7 ± 0.33 mm2 in the CND group vs. 3.3 ± 0.34 mm2 in the HFD group, p<0.05), lumen area (2.6 ± 0.54 mm2 in the CND group vs. 2.0 ± 0.33 mm2 in the HFD group, p<0.05), and percent area stenosis (52.0 ± 7.96% in the CND group vs. 62.4 ± 5.15% in the HFD group, p<0.05). Body weight change was not different between the two groups. Increased serum cholesterol level activated vascular smooth muscle cell proliferation in the porcine coronary overstretch model.